Xhorse VVDI2 Software Update to V5.8.0 (2018-09-04)


Xhorse VVDI2 key programmer software released to V5.8.0 on September 4th, 2018.

 

*** 2018-09-04
*** Require firmware V5.8.0
************************************************** **********************
===== VAG V5.8.0 =====
1. Bugfix for read PIN/CS from old touareg ECU, manually select type is: MED9.1 single
2. Bugfix for read PIN/CS from old Bentley ECU, manually select type is ME7 slaver
3. Immoprovement for autodetect VAG immobilizer system
4. Flash VAG firmware(frf, odx, sgo): support flash VAG firmware bigger than 300M, support flash virtual cockpit cluster
5. Bugfix

===== BMW V5.8.0 =====
1. FEM/BDC system add reset ECU lock(Usually used after exchange FEM/BDC)
2. Improvement for FEM/BDC key learning
3. Support read E-Series ECU synchronize code via OBDII: MEV9N46, MEV9N46L, N62_TUE, N62_TUE2, MS450DS0, MSS60, MSV70 etc
4. Bugfix

===== Porsche V5.8.0 =====
1. Bugfix

===== PSA V5.8.0 =====
1. Bugfix

===== Transponder Programmer V5.8.0 =====
1. Improvement for Rover/Jaguar(2015-) MC9S12EXT256/MC9S12EXQ384
2. Bugfix for new wireless remote
3. Immobilizer data tool: Bugfix for Euro->Peugeot->C1 24C04
4. Immobilizer data tool: Add support for Aisa->China Immobilizer box: JIAOTONG/LIANCHUANG/DELPHI/TONGZHI
5. Bugfix

===== Copy 48 (96 bits) V5.8.0 =====
1. Bugfix

===== J2534 V5.8.0 =====
1. Bugfix

===== Online Upate Tool V5.8.0 =====
1. Bugfix

===== Quick Start V5.8.0 =====
1. Bugfix