How to replace CONDOR XC-007 motherboard

The following part displays the step-by-step guide of how to get CONDOR XC-007 key cutting machine' motherboard replaced.

Step 1:
Take down the total 6 screws on each side of the head cover (follow the direction of arrow).

NOTE:
Unplug one flat cable and two button cables on the head cover. Pay special attention to the card buckle on the cover.

Step 2: Take down the 8 crows on the back of the machine follow the direction of arrows.

Step 3:
Take down the 4 screws marked arrow above. Draw out the main board together with the fixed mount.

NOTE:
Please record the connection ways of the connecting lines on the board by taking pictures before draw the main board out.