How to Replace a lost BMW X1 key with BMW Multi Tool 7.3

BMW Multi Tool 7.3 version is a high quality auto key programmer that supports CAS 1, CAS2, CAS3, CAS3+, CAS4 and CAS4+. Even if you lost all keys to your BMW X1, it is able to program a new one. Here is a quick guide about how to replace a BMW X1 dealer key use the tool:

1. Pick the BMW X1 door with LISHI BMW HU92v3 lock pick tool.

2. Follow the picture below to connect BMW Multi Tool hardware to the car and the PC with BMW Multi Tool software. Plug the USB dongle to the PC as well.

3. Start BMW Multi Tool V7.3 software.

4. Click on “Connect” in the main menu of the software.

5. Once the software connection is hooked up, you will get a new window. Click on “Key learning”.

6. Click on “Get key information”.

7. You will get another new window. Click on “Add key” and then “Next”.

8. Now you will get a message to remove the key fob.

9. A few seconds later the tool will automatically read the car key information. When info pops up, click on “OK” and then save the key information.

10. Select “Program dealer key” on the bottom and then select the number keythat you want to program on the left, for example, key No.1, and then click on “Program dealer key” again.

12. Put the key fob that you removed in step 8 in BMW Multi Tool hardware coin and then click “OK” in the software.

13. Next you will get a window asking whether the key being programmed is a smart key or not. Select “No” and the dealer key programming will start instantly.