How to Connect Xtool PS2 GDS Gasoline Scanner


This is a how-to guide of Xtool PS2 GDS Bluetooth Diagnostic Tool  connection for obdii diagnosis for gasoline cars.

 

Note: if you are not the Chinese, English, Spanish speaker, go for xtool ps2 gds update. The 16.21 version friendly add more language: German, French, Portuguese, Italian, Dutch, Arabic, Farsi.

 

The obd connector you need

xtool-ps2-gds-connection-2

The GDS VCI reader

xtool-ps2-gds-connection-3

Connect the OBD connector to the VCI

xtool-ps2-gds-connection-4

And fix them firmly

xtool-ps2-gds-connection-6

The connection diagram here

xtool-ps2-gds-connection-7

So connect to the OBD port on the car

xtool-ps2-gds-connection-8

xtool-ps2-gds-connection-9

The light on the VCI turns read

xtool-ps2-gds-connection-10

Then power on the Xtool PS2 scanner

xtool-ps2-gds-connection-11

Both lights on the scanner and VCI turns green

xtool-ps2-gds-connection-12

xtool-ps2-gds-connection-13

xtool-ps2-gds-connection-14

Finally, it’s ok to do diagnosis/ immobilizer, mileage adjustment/ TPS/ maintenance reset/ electronic park brake.

xtool-ps2-gds-connection-15

Note: Xtool PS2 GDS v16.21 can do more, such as Transmission, Steering angle,Tire pressure loss alarm (activated) and other common special functions.