How to install TangoPlus Toyota Software for Tango


Part I: How to Install Tango software?
 

System Requirements

  • OS: Win XP, Vista 32bit; 7, 8, 10, 11 64bit
    For XP, Vista & 7 all Microsoft Service Packs and Security Updates have to be installed.
  • 1GB available storage space
  • Internet connection

Setup

1. Download setup file depending on your OS [Win 7, 8, 10 & 11 or Win XP, Vista]

2. Uninstall previous version
If you have never installed Tango software on your PC with a previously released setup file, skip this step.
If Tango software was previously installed on the PC, default path is “C:/ Program Files /Scorpio-LK/Tango” or “C:/ Program Files (x86) /Scorpio-LK/Tango” , uninstall it through the uninstall executable. To find where Tango software resides, right click on the Tango desktop shortcut icon > Properties > Open File Location.

3. Launch InstallOnline.exe (for Windows 7, 8, 10 & 11) or InstallOnlineXP.exe (for Windows XP & Vista) then follow its on screen instructions and prompts.

After main Tango software is installed, you will be prompted to install the required Microsoft Visual C++ libraries, which will initiate its interface. If you have them installed on your PC, chose either Reinstall or Repair option.

Finally the setup will initiate Tango’s USB driver setup. Make sure that Tango hardware is not yet plugged in the PC and press OK. For Windows OS 7, 8, 10 & 11 this will conclude the setup, after which connect Tango hardware and Tango.exe (or its desktop shortcut) can be started.

If you have Windows OS XP, Vista, after driver installation the driver is only pre-installed. To complete driver installation, plug Tango hardware to USB port and wait the standard Windows dialog appears: “Found new device”. Click the dialog and select “Install automatically”

4. Connect Tango to PC

5. Run Tango.exe, an automatic updates procedure will initiate and prompt you to download the latest software version.
Follow the on-screen interface.
Steps 6 & 7 below are automatic. Don't call any interface functions while they are running. Depending on your Internet connection they can take some time.

6. After latest software version is downloaded, Tango.exe will close and relaunch and initiate firmware update.
If it doesn't relaunch with the new software version you haven't installed the required Visual C++ libraries during Step 3

7. After firmware update is complete, Tango.exe will relaunch and prompt update of the built-in hardware timer.

8. Upon timer reset, restart Tango.exe. This is the final step of the setup. To download any auxiliary files select Help->Updates->Check Updates


Part II: Tango Key Programmer Software Installation:

  1. Download the software files on your desktop.
  2. Double click on the Tango software installation file (.exe).
  3. Select language and click Ok.
  4. Click Next.
  5. It's recommended to leave the installation path as it is and click Next.
  6. You can change the name of the shortcut in your start menu. Click Next.
  7. Check the checkbox Create a desktop icon for easier access and click Next.
  8. Wait for the installation.
  9. Deselect Launch Tango and click Finish.
  10. Go to the folder, where you just installed your Tango Software.(Default : My Computer > Local Disc(C:) > Program Files (x86) > Tango Scorpio-LK).
  11. Open the Driver folder.
  12. Choose your operation system type and open the folder.
  13. Right click on the ftdibus and choose Install.
  14. Click Ok to finish the driver installation.
  15. Go to your desktop and right click on the Tango software's shortcut.
  16. Choose Run as administrator.
  17. When the Software starts click Update on the OnLine Update window to update your Tango Software.
  18. Click Ok and wait for the update to complete.
  19. Your Tango programmer is now ready for work! 



TangoPlus Software Installation:


Here you can download Tango key programmer TangoPlus software for Toyota smart key programming.
 

Free Download TangoPlus Toyota v6.5 software

https://mega.nz/#!ug9ggAiI!ubnm7DBLMXZsfJjCza32S5LEHtBXc1mzWwXI1rxt2Fk
 

How to install TangoPlus Software?

Download TangoPlus software from link above

Paste Tango-Pus-Toyota-v6.5. zip file on desktop

Extract software zip file

You will get Tango+Toyota.exe and toyota+ .chm files

Right click Tango software on desktop and select Properties->Open File Location

install-tango-plus-software-2

Paste and replace Tango+Toyota.exe and toyota+ .chm files on C://Program Files (x86)/Tango Scorpio-LK/Plus

install-tango-plus-software-3

install-tango-plus-software-4

install-tango-plus-software-5

Open Tango transponder programmer software on desktop

Now you will see TangoPlus function

install-tango-plus-software-6

install-tango-plus-software-7

Done.

Reference:

Program Lexus GS 450h All Smart Keys Lost with TangoPlus