12% off

Original Fcar FVCI Passthru J2534 VCI Diagnosis, Reflash and Programming Tool Works same as Autel MaxiSys Pro MS908P Pre-order

In Stock. History 1 sold. Item No. SP306

Latest price: $1,700
Buy Now: $1,500 12% off
March Promotion : Buy More Save More
1-500USD : 5% OFF
>500USD : 6% OFF
Shipping:
Free Shipping Express Shipping Service    Estimated delivery time: 3-5 days »
Weight:
2.0KG     ( 4.41LB )
Package:
25cm*15cm*10cm     ( Inch: 9.82*5.89*3.93 )

Product Description

FVCI is a PASS-THRU device of FCAR. It supports J2534 protocol, and it will support other protocol for free later. FVCI J2534 supports multiply communication manner of DOIP protocol, and it can setup Ethernet(tx_+, tx_-, rx_+, rx_-) and active line to any pin number of OBD2 except for ground pins and power pin.
FCAR FVCI PassThru J2534 Reflash/Diagnostics VCI

FVCI is a PASS-THRU device of FCAR. VCI use 3 ARM microcontrollers design, this will make the processing capacity of FVCI stronger and support OEM software better. It supports J2534 protocol, and it will support other protocol for free later. In addition, the hardware of FVCI supports multiply communication manner of DOIP protocol, and it can setup Ethernet(tx_+, tx_-, rx_+, rx_-) and active line to any pin number of OBD2 except for ground pins and power pin.
fcar-fvci
FVCI J2534 diagnostic and programming
 
Product feature: 
  • Three ARM microcontrollers.
  • Three individual physical communication channels for protocols(CAN, single wire CAN, KWP, PWM, VPW, SCI and so on).
  • Ethernet converts to OBD2 for DOIP protocol, the pins(tx_+, tx_-, rx_+, rx_-, active line) can set any pin number of OBD2 except for ground pins and power pin.
  • Program voltage output between 5v and 20v.
  • One Ethernet port.
  • One analog input port.
 
Fcar FVCI Passthru specification:
Hardware function  
J2534 ISO15765
  ISO14230
  ISO9141
  ISO14230
  J1850
  SCI
  Single wire CAN
DOIP Ethernet port convert to OBD2
  Local area network of FVCI convert to OBD2
Program voltage port 5v-20v
Ethernet port 1.   Ethernet port to ODB2 interface for DOIP
  2.   Ethernet port to local area network of FVCI
Analog input 15 pins analog input
Vehicle port 26 pins port communicate to vehicle
Update pin Use for update firmware of FVCI
DC 12v power supply
 
FVCI J2534 support function

Diagnose function

TOYOTA Techstream
HONDA HDS
Volkswagen ODIS
VOVOL VIDA
GM GDS
BMW ISTA
JARGUR LANDROVER JLR SDD

Reprogramming

Acura, Honda
Audi
BMW
Chrysler, Dodge, Jeep, Eagle, Plymouth
Ford, Lincoln, Mercury
GM
Hyundai
Infiniti
Isuzu
Jaguar
Kia
Land Rover
Lexus
Mazda
Mercedes-Benz
Mini
Mitsubishi
Nissan
Porsche
Subaru
Suzuki
Toyota, Scion
Volkswagen
Volvo
 
FVCI Device interface
Right panel

fcar-fvci-device-interface-1
1) DC 12V/1A
2) Network port
3) USB port
4) Update pin, use for firmware update

Left panel
 fcar-fvci-device-interface-2
5)  Analog input
6) Programming voltage supply, 5V-20V, 120ma
7) Vehicle communication port

Lamp panel
fcar-fvci-device-interface-3

8) Device power status lamp
9) Software of device running status lamp
10) Vehicle communication status lamp
11)  Network connection status lamp
12) USB connection status lamp

 

How to Update Fcar FVCI J2534 Passthru Software & Firmware?

Official website: www.fcar.com

1. Click “FVCI” icon on the desktop. Note: The computer must be connected to internet.
update-fcar-fvci-1
2. Click “Read Version” can read FVCI software and hardware version.
update-fcar-fvci-2
3. Click “Firmware Update” can update the hardware.
4. Click “Software Update” can update the software.
5. Click”DOIP”, then click “Enter DOIP mode”, the FVCI will enter the situation of Ethernet convert to OBD2 of DOIP. 
update-fcar-fvci-3
6. Click ”Firmware Refresh” when you operate“firmware update” error.

Update Tips
1) Please enable internet connection before upgrade
2) The firmware version and software version must be the newest version meanwhile. Otherwise the device will appear some error.
 update-fcar-fvci-4
3)  If you use “Firmware update” failed, you can use “Firmware refresh”. 

CGDI Prog MB Benz Car Key Programmer with a Free ELV ESL Renew Emulator



V2018.12 BMW E/F Scanner II Full Version



If you have any questions, please do not hesitate to contact us, below is our contact information:


Live Support: Chat with us online
Whatsapp: +86 18259252285
Email: Sales@OBDII365.com
Skype: OBDII365.com

Shipping method and delivery time:

US, UK & Amazon US &Canada  & Australia Warehouse Shipping: 3-5 working days. We have stocked up hot sale items in US, UK & Amazon US &Canada  & Australia Warehouse ,which is more convenient for you. Free TAX, faster shipping with cheaper price. 
DHL Shipping: 3-4 working days, To help you clearance we will help declare a lower price on the invoice help clearance. If address is remote area, customer need pay remote freight or we will ship by Normal Post or Yanwen Express.
Yanwen Express: 5-10 working days, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
 
Scan Our QR Codes:
website
Website
official blog
Official Blog
scan our facebook
Facebook
scan youtube
Youtube

Technical Support

How to install/set up Fcar FVCI J2534 software?

OEM official website : www.fcar.com

 

1. Software setup 
The FVCI tool package is in the CD, or it can download from www.fcar.com.
1) Double click FVCI_Setup.exe.
2) Click “Next” button.
set-up-fcar-fvci-1
3) Go on click “Next” button
set-up-fcar-fvci-2
4)Click “finish” button. The software setup done.
2. Install .net framework4.0
1)Click ”Microsoft.NET”.
set-up-fcar-fvci-3
2) Accept license terms and click on Install
set-up-fcar-fvci-4
3. USB driver install
1)  FVCI connect to power, then the device working.
2)Connect USB line to computer.
3) Click “Start”
set-up-fcar-fvci-5
4) Click “control panel”.
5) Change the view to small icon in the top right corner.
set-up-fcar-fvci-7
6) Find “Device manager”.
7) And you will find “FVCI” label. (The USB must be connected to the computer.)
set-up-fcar-fvci-9
8) Right click ”FVCI”, and click “Update Driver Software”.
set-up-fcar-fvci-10
9)Click “Browse my computer for driver ”.
set-up-fcar-fvci-11
10)Click “Browse”, and input the driver path of USB driver package.
set-up-fcar-fvci-12
11) Click ”OK”, then click”next”.
12) If there is a windows security popup, Click “Install this driver software anyway”.
set-up-fcar-fvci-13
13) If following information displays, it means install successful.
set-up-fcar-fvci-14
14) Check the “device manager”, if you see below figure, it means FVCI has been connected to the computer.
set-up-fcar-fvci-15
15) Start running software.

How to Update Fcar FVCI J2534 Passthru Software & Firmware?

1. Click “FVCI” icon on the desktop. Note: The computer must be connected to internet.
update-fcar-fvci-1
2. Click “Read Version” can read FVCI software and hardware version.
update-fcar-fvci-2
3. Click “Firmware Update” can update the hardware.
4. Click “Software Update” can update the software.
5. Click”DOIP”, then click “Enter DOIP mode”, the FVCI will enter the situation of Ethernet convert to OBD2 of DOIP.
update-fcar-fvci-3
6. Click ”Firmware Refresh” when you operate“firmware update” error.

Update Tips
1) Please enable internet connection before upgrade
2) The firmware version and software version must be the newest version meanwhile. Otherwise the device will appear some error.
update-fcar-fvci-4
3)  If you use “Firmware update” failed, you can use “Firmware refresh”.

Buy more and Save more