1. AVR series single-chip high speed programming
2. PIC series 8-bit microcontroller programming
3. Serial 24/25/35/45/93 series programming
4. High-performance BIOS programmer
5. Car computer chip programming
6. Support WIN2000/WINXP/WIN2003/WIN2008/WIN_VISTA/Windows7
7. Suport over 6000 chips (Various serial and FLASH, EEPROM, SOP,PLCC,TSOP Encapst
Key & Unique Features:
1. Complete new professional design with own robust enclosure and 40pin ZIF socket
- Mini enclosure is designed to suit the portable and field convenient applications
-40 -pins powerful pin drivers, no adapter required for any DIP devices
2. Fully automatic & no manual set-up needed (eliminate all jumpers & DIP-switch)
-Fully automatic for efficient use and extends the programmer life time
--Eliminates all jumpers on board, manual set-up for jumpers is no longer needed (all non-USB Willem use jumpers: 16 jumpers on PCB5.0C, 48 jumpers on Willem 1.5)
-Eliminate the on-board DIP Switch, manual set-up for DIP switch is no longer needed.
-This also makes much easier & very simple to use for end users.
-Plug-and-play reduces the learning curve and save your precious time.
3. Fast mode SPI programming
4. True USB data transfer interface with PC/Laptop for newer laptop use as well as portable application. USB 2.0 (high speed, full speed) and 1.1 compatible interface
-Uses only one USB cable to connect with PC/Laptop USB port for both data transfer and power supply. The bulky DB25 data cable is eliminated & no longer needed for data transfer between PC and programmer board
5. Exponentially speed increase up to 10~20 times faster
-Connects PC via high-speed USB link, provides the fastest possible data transfer rates for programming/reading data from target IC's.
-It is capable of being up to 20 times faster than other existing printer port Willem (Parallel LPT Willems: PCB6.xx,PCB5.0B,PCB4.5C) programmers on reading & verification a high density flash device, this significantly saves your time and increases work efficiency as well as facilitates small scale production
-Assembly language written programming algorithms run fast and reliable. Not affected by the PC speed changes and Windows 0/S variations.
6. Power supply capability: USB port automatic voltage control
-Vcc supported among: 3.6V, 5V, 5.5V, 6.5V
-Vpp support among: 3.3V ~ 21V
-On-Board MCU for stable performance & automatic/accurate voltage control
-Works best among other programmers for EPROMs
The difference between the TL866CS and TL866A
1. ICSP interface (6-pin interface of the programmer right side) is limited to the TL866A model.
2. Partly Microchip's MCU with More than 40pins require the use of the TL866A for ICSP interface programming .
Most of Microchip's PICs MCU support programming on ICSP and 40PIN seat.
3. About ATMEGAxxxx and SYNCMOS’s MCU SM89xxx SM59xxx
TL866A support serial programming on ICSP and parallel programming on seat.
TL886CS only support parallel programming on seat.
4. AT45DBxxxx can only be programmed using the ICSP interface (TL866A only).
5. To all other chips. TL866A and TL866CS no diffrent.
Both programmers work with genuine TL866 Adapters for devices up to 48 pins.