2nd Generation [BMW Full Package] Yanhua Mini ACDP 2 Programming Master with Module 1, 2, 3, 4, 7, 8, 11 with License for BMW Key Programming Cluster Corretion

Product Description

Yanhua Mini ACDP 2 Programming Master BMW Full Package with Module 1, 2, 3, 4, 7, 8, 11 
 

Highlights

• With Module 1/2/3/4/7/8/11+ License
• For BMW Key Programming Cluster Correction
• Test vehicle: NO longer needs engines
• Programming: NO need soldering
• Locksmith: NO longer needs soldering work.
• YANHUA: keys programming - NO longer need soldering iron
• The first in the world: BMW CAS4 FEM BDC 16ODOWT Programming no need soldering
• Includes eeprom function, CAS1-CAS4 FEM BDC key programming, DME ISN reading and writing, eeprom 35080 35160DO WT reading writing, Refresh BMW Keys and BMW FRM Programming.
• For EGS 6HP ISN E-series, please buy this license together.

Packing List
1set x Yanhua Mini ACDP 2
1set x Yanhua Mini ACDP 2 Module 1
1set x Yanhua Mini ACDP 2 Module 2
1set x Yanhua Mini ACDP 2 Module 3
1set x Yanhua Mini ACDP 2 Module 4
1set x Yanhua Mini ACDP 2 Module 7
1set x Yanhua Mini ACDP 2 Module 8
1set x Yanhua Mini ACDP 2 Module 11

Buy ACDP 2 BMW Full Package Get Following Free Gifts:
Free B48 bench interface board(SK337)
Free N20 Bench Interface Board(SK329)
Free N55 Bench Interface Board(SK336)
Free B38 bench interface board(SK339)

ACDP BMW Full Package Includes the Following Modules

Yanhua Mini ACDP 2 Basic Module

Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), 
and parts of Freescale / NEC MCU in circuit programming (ICP). This module is a necessary basic configuration for other modules.

Yanhua Mini ACDP IMMO Mileage Programming
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin

ACDP2 MINI CAS Module 1 with License A500

Functions:
Support BMW Key Programming for all series
CAS1-CAS3+ Module:
Key Programming by OBD
Read CAS EEPROM
Add Keys
Reset Mileage
Back up or recover CAS
All keys Lost 

CAS4 / CAS4+ Module:

Read CAS4 EEPROM without soldering / welding
Add Keys without soldering / welding
Reset Mileage without soldering / welding
Back up or recover CAS without soldering / welding
All keys Lost without soldering / welding 

ACDP MINI FEM/BDC Module 2 with License A50A A50C

All keys lost without soldering / welding
Add keys without soldering / welding
Delete Keys without soldering / welding
Enable / Disable keys without soldering / welding
Read Key ID
Repair / Replace FEM Module without soldering / welding
Reset Mileage without soldering / welding

 ACDP MINI ISN Module 3 with License A50B A50D A50E

Read and Write ISN Code: 

N20 (MEVD1724, MEVD172P, MEVD1729), N13 (MEVD1725, ), N55 (MEVD172, MEVD1726, MEVD172G, MEVD172S, MEVD17 ), MSV80, MSD81, MS085,
MSD85HY, MSD87, MSV90, MEVD1728 (s63), MEV1722, MED172, MEVD1727, DDE701,DC17C50, BMSX...

Add new:
  Supports E Chassis
  Read N62_ TUE2 DME ISN
  Read MEV9N46 DME ISN
  Read MEV9N46L DME ISN

ACDP MINI 35160 Module 4 with License A802

Read BMW ISN code 
Read and write Fujitsu CPU MB91F dashboard of Honda Hyundai Kia etc
Read and write all the 8pin IC chips

ACDP MINI Refresh BMW key Module  7 with License A521

The Yanhua Mini ACDP BMW key renew module is used to renew keys for BMW E series and F series so that the key can be used again

Supports BMW FRM Footwell Module 0L15Y EEPROM FLASH Read / Write
Supports BMW FRM 3M25J EEPROM, D-FLASH, P-FLASH Read / Write

ACDP MINI FRM module 8 (FRM Footwell module) 

1.Integrated data reading / writing, data conversion in one programmer；
2.no need to write other cars’ data;
3.no need to coding.  
4.Simple and efficient.

Yanhua Mini ACDP Module 11 Clear EGS ISN Authorization License A51A with Adapters 

Functions includes as below:
EGS State
Clear ISN
Reset Adaptation
Backup Coding
Recover Coding

Support BMW E Chassis 8HP ISN Clear now, if you need, you can pay for the A51D License for BMW E Chassis 8HP ISN Clear
Support BMW E Chassis 6HP ISN Clear now, if you need, yo can buy A50F License for BMW E Series 6HP(GS19D) Gearbox/Transmission TCM EGS ISN Refresh


Yanhua MINI ACDP BMW VS CGDI BMW VS Xhorse VVDI2 BMW:

Clumn Name	Mini ACDP BMW Full	CGDI BMW	Xhorse VVDI2 BMW
BMW CAS1-CAS3 Key Programming	Yes	Yes	Yes
BMW CAS4-CAS4+ Key Programming	Yes, No need Soldering	Yes, need Soldering	Yes, need Soldering
BMW FEM/EDC Key Programming	Yes, No need Soldering	Yes, need Soldering	Yes, need Soldering
BMW DME ISN Code Read & Write	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
BMW 35080 35160DO WT EEPROM Read & Write	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
Refresh BMW Keys	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
Free FRM Programming	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, need Soldering
BMW CAS Mileage	Yes, No need Soldering	Yes, need to buy authorization, and need soldering	Yes, but need to work with other device

Yanhua mini ACDP BMW Review:

1. nice tool again. this stray with all the activations is also worth more (BMW CAS1, CAS2, CAS3, CAS3 +, CAS4, CAS4 +, FEM, BDC 8pin IC chip read and write ..)

2.currently i’m only doing bmw with cas 1-3 and ews my lonsdor can do cas 1-3 it will only add keys to 3+ and up. I just don’t like to solder so I figured this tool would simplify things a bit and make it faster

3. I got it since a week and i am excited
    M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and its better to desolder)
    Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps)
    Tried several CAS4 to read with out any problems, Mileage reset works too
    CAS3 tested only 1 but read without problem
    On a nother group they reported to create successfully keys on FEM/BDC and CAS4

4. I just get it.
    Reading eeprom cas4 and make a key for f11 so far done.
    Cant say much more.
    cas4 reading eprom compared with vvdi reading and its matching 100%

5. All 35080/160 are possible, like all other programmer can do also.
    ACDP is also working with smartphone tethering so a router is not a must.
    Didn’t test if it works offline,
    Fem key making and mileage reset is confirmed by other users in WhatsApp group,
    I can confirm mileage reset cas3/3+/4, key making cas3/3+, key 868mhz refresh
    and frm programming
    But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer
    until you have figured out how to place probes correctly

6.  I have it and have had it for more than 3 months now.
    It works perfect on all CAS types and for AKL but for FEM and BDC it still has a long way to go.
    Its also compitable via bluetooth so not only wifi is needed.
    Its a great and small tool, easy to use, compared to VVDI, R70, Upa and etc.

7.  for FEM/BDC with isn or key make, you have to use module 2. For 35160/35080 BMW dashboard mileage correction, you need to get module 4.

8. Tested the Mini ACDP here with 4 CAS3 and one CAS4+ without any problems. For the first CAS3 I needed more than 5 minutes to place the pins correctly but after some experiences I needed only 30 seconds for everything. Important is that you use the small screw tools to clean the contacts.
 For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.

9. something good to share: For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won’t need the electric bridges any more, and it is easy to use.

10. I got Yanhua mini. Interesting tool. I can connect to CAS real easy. Reads ok. So far

*1. Read F10 N55 ISN OBD - OK
*2. Make key Cas 2 by dump - OK
*3. Made key CAS3+all keys lost - Not working forst time, I am trying it again today just to be sure
*4. Read FRM - OK
*5. Renew random used key - Nok but resetting key I just made with the tool works 100%, interesting
*6. Check key frequency - nok, It shows key frequency when making key but there is a fubction for checking random key frequency. Cant get that to work yet
Not tested CAS 4 or FEM yet though I think it may be strong in that condidering it read F10 ISN via OBD

Support do respond to queries. They are handling my issues in 3 and 5 above. More testing to come. I like the fact that it receives free updates. That should mean issues will get resolved as we go along (not sure is CAS3 will be given that much attention). I love the idea of not soldering if only to save my poor vision

11.Today I received this tool and do some testing. 

reset used key 868mhz e series- successful reset
cas4- reset milage to 0 - successful 
cas4- read eeprom and flash BUT EVERY TIME DIFFERENT DATA(the read out file, named with date ).
i will post readed files someone can check if is ok
Frm3 xeq384 - can read and write d flash, and that is all. CAN NOT write eeprom 

FAQ:

Q: Will acdp bmw support 2019 all bmw function?
A: It support f chassis, do not support G chassis(2019 BMW 5 series and 7 series is G chassis)

Q: With your ACDP, I need remove ST95256 from FEM?
A: No need remove ST95256, no need weld with ACDP

Q: If ACDP can change VIN for BMW?
A: Yes, it can change VIN for BMW: you need read out CAS data, then use ICP repair it, change VIN, save new data, finally reverse the CAS module

Q: Does ACDP BMW support 2015 BMW 528li cas4+ add keys via obd?
A: No, CAS4/CAS4+ do not support obd mode

SUGGESTION:

---

We are here for you:

Skype: OBDII365.com
Email: Sales@OBDII365.com
Whatsapp : +86 18259252285
Business Whatsapp: +44 7418605489