Yanhua ACDP BMW E Series 6HP(GS19D) EGS ISN Refresh Module 17 Adapter with License, it is worldwide first adopt bench mode connection, clear the BMW E series 6HP EGS ISN on Bench, support to read BMW E series 6HP EGS ISN on bench or via OBD
E70 GS19D ISN RESET
Module 17 with some "extra wires” to prevent EGS removal and disassembly. Gearbox working as it should now.
Most of the time spend to plug wires inside gearbox socket. After that 1 min Job and EGS working great. socket that is coming with module 17 is good only if You have ecu out of gearbox. Otherwise You have to use wires with connectors at the end.
Replied byJoyceon Jul 16, 2021
Hi,dear Mr.Alexander
Good day!
Thank you for your support and feedback on our website.
Any further questions please feel free to contact us.
Best regards!
OBDII365
byMr.Akis Karaon Jul 7, 2021
i done on 8hp normally over obd and also on 6hp from f01 on car without remove electronic from trans. I only add external power supply. Egs draw about 1.3a on start and only 0.4 on prog. removing elect is pain in the a.. so i make my cable with relay to supply voltage to egs and acdp from external 14v 4a ps and look for amps. All went ok on first try.
Replied byJoyceon Jul 16, 2021
Hi,dear Mr.Akis
Good day!
Thank you for your support and feedback on our website.
Any further questions please feel free to contact us.
Best regards!
OBDII365