hello,
i recived tool, thanks evrythings ok.please
regards
Flip

The tool bring my current setup to a whole new level. I compared this to order similar brand that are just trying to to the same thing. It has great battery life and work with all models. You can scan, program and diagnose TMPS sensor. By far is the best accessory I added to my x431 launch Scantool. It got a few updates since I got it which gives me peace of mind knowing that the tool it’s supported.

I ordered the x-431 TSGUN for my Launch Pro3 scantool. The first thing I noticed is the quality construction and feels good in the hand. The owners manual was easy to understand. I had it hooked up bluetooth in mins. after I got it! I have already used the TPMS WAND and I am impressed. The speed of the tool is very good. I have been able to use it on 5 different brand cars with no problem! I would recommend x431 TSGUN for sure! Thanks

Awesome tpms tool. Paired up with my pro3+ scanner, updaded firmware and was ready to go. I replaced 1 rim on my car and it was freaking out becouse the sensor id was not programmed to the car. Programmed no problems. Also great when you do tire rotation, program the sensors in the correct order. Feels durable and solid. Happy with the tpms gun.

The TSGUN is made for integration with a Launch diagnostic tool. In my case, I am using a Launch X431 Pro3S+. The two devices bind over bluetooth, and was quite straightforward. Once bound, one can perform a variety of TPMS functions using the TSGUN through the Launch X431 TPMS screen. Firmware upgrades are downloaded by the Launch scan tool and sent to the TSGUN, keeping it up to date. Functionally it is quite simple - select your country region, vehicle brand, and specific vehicle. Then pointing the TSGUN at the sensor, one can both read status of the sensor or program the sensor to the specific car. I wanted to show a specific case where there is a failed TPMS sensor. The BMW I was diagnosing had two TPMS error codes - one for the right rear wheel sensor, a second for the TPMS receiver antenna. It is not unusual to have an antenna error if all four sensors are not being read. Pointing the TSGUN to the right rear sensor, I attempted to code the sensor. After 20 second the TSGUN notified the Launch Pro3S+ that it failed to communicate to the right rear sensor. This confirmed that my issue was, in fact, a bad wheel sensor, which was one of four new HUF sensors that had been recently installed. The other sensors read just fine. If you have a Launch diagnostic tool, the TSGUN is a great addition. It is sturdy, well built, with simple and straightforward functionality. One or two diagnostic and reprogramming sessions pay for the tool. Tough to beat!

Very easy to pair with my x431pro5. Hope to have this work without any issue. But Launch really great product. Upgraded in 3 min. and work as it should.

Great product. It's worth every cent. LAUNCH X431 TSGUN TPMS relearn tool can work well with my x431 v pro. I use it to check the condition of the tires and it will tell you the sensor ID, tires air temperature, battery level and pressure of each wheel. I purchased a new set of tires and rims with installed and balanced TPMS sensors. As you know new sensors must be activated and saved in the car's ECM. When I used the TSGUN TPMS Relearn Tool and rescanned all the sensors, I was able to get the menu instructions to insert the tool into the OBDII port, and I was able to save these sensor settings to the car’s ECM and dashboard warning lights disappeared. Overall, it is easy to bind and use, works well, made with good material and is a cheaper investment for a family garage then everytime visit a workshop. I will upload a video review in 1 or 2 weeks.

Hi, i received the package. it looks like good quality. I had no problem activate and bind it my x431 v+ 4.0. It also updated itself with new firmware as soon as it connected to the V+ pad. Immediately updated software. not yet checked it on cars.

---

I have tried on a different vehicle and have got it to work.

Flawless operation and easy synchronization with x431.