Digiprog 3 FAQ
Following are some questions frequently asked by customers.
Q: what is Digiprog III power-on password?
A: Digiprog 3 Power-on password is 1. After enter password "1",
click tick" √"not " X", otherwise Digiprog3 will freeze.
A: better use Digimaster 3 to program mileage for the high-end BMW. Digiprog3 can't make key for BMW, advice you use AK300 key pro.
Q: Does digiprog3 work with VW golf 6 2009, golf 5 2006 and Peugeot 407 2006?
A: Yes. Digiprog 3 does.
Q: When I connect Digiprog3 with computer, I got error "DiagProg3.Setup GetByte_USB-TimeOut".
A: Only when you want to update Digiprog3, you can connect Digiprog3 with computer. At other times, don’t connect Digiprog3 with computer.
Q: I download eeprom from digiprog3 v4.82 and store it in the computer, it fails to connect the software and the USB driver is successfully installed, but diprog3.exe found no hardware, it needs to store eeprom file, but the memory is full.
A: Sorry, digiprog v4.82 needs no connect with the computer, unless it needs to update.
Q: You say Digiprog3 can't connect with the computer, then what is the "setup.exe" used for? Where is the USB cable to be connected? How to supply power? After plug the OBD cable into the car, Digiprog 3 suggests insert No.1 cable, do I have to remove dashboard?
A:
1) Do not install the CD-ROM software "setup.exe".
1) Do not install the CD-ROM software "setup.exe".
2) When you want to update digiprog3, connect the USB cable to the computer.
3) It doesn't need power cord if the digiprog3 is directly connected to the car, the car will supply power for digiprog3.
4) After you plug the OBD cable (16pin cable), digiprog3 suggests you insert NO.1 cable, it means you have to use ST01 cable, not OBD cable.
Q: Does digiprog 3(SM33-Z) need power cord?
A: When you directly plug OBD cable into the car to change mileage, it doesn’t need power cord, the car will supply the power; when you change mileage for the car by removing dashboard or chip, it will need power cord.
Q: I found Digiprog 3 power supply is not 220V, does it matter?
A: Generally speaking, Chinese power input 110-220V, digiprog 3 power input 110-220V and power output 12V.
Q: How to select the language what I want.
A: Digiprog 3 DVD is German, but the operation is available with both English and German, after you turn on Digiprog 3, click "language" option to set.
Q: With digiprog 3, how to convert KM to miles?
A: Our odometer programmers change the mileage value in KM, if your car mileage value is in miles unit and it becomes into KM unit after programmed, go to reset back in miles unit in the dashboard menu.