FVDI 2018 change Odometer on BMW E91 CAS3+
How-to: correct odometer on a CAS3+ BMW E91 with FVDI 2018
commander by dump.
Vehicle model: E91
Cluster type: Siemens VDO
Step 1: Read dump
Step 2: Write KM
Step 3: Flash new file to IMMO
Step 1: Read CAS3+ Dump with Xhorse VVDI Prog
In VVDIProg software, select BMW CAS3+ 0L15Y
Make connection following the wiring diagram
Read and save CAS3+ dump
Step 2: Change KM with FVDI 2018
Connect 2018 FVDI commander with laptop
Open software and select VVDI2 function (FVDI 2018 comes with free VVDI2
Select BMW V1.2.2
->File change KM
->Select type: CAS3+ (0L15Y, 0M23S)
->Load EEPROM dump file
Upload dump file read by vvdi-prog
Load file success. Check the old KM
Manually enter new KM you desired and press Change KM
Save new EEPROM dump file
Change KM in immobilizer success.
Step 3: Flash the new file into IMMO ECU
You must change KM in instrument dashboard manually before connect IMMO ECU to car.
Go back to VVDI Prog
, write immo with the new dump file into IMMO.
Reinstall IMMO box and back to vehicle.
Check the new KM changed.