How to Install Opcom V1.65 V1.7 VAUX-COM 120309a

Opel diagnostic interface Opcom firmware V1.65 and V1.7 with real PIC18f458 chip are available at obdii365.com.

Software version: VAUX-COM 120309a (2010V and 2014V optional)
Operating system: Windows XP/Windows 7
Firmware: Opcom V1.59/V1.65/V1.7
Language: English

VAUX-COM Win 7 install tips:
1) Never update opcom firmware/software.

2) Opcom 1.59, 1.65 and 1.7 software enjoy the same installation procedure
3) Run software as Administrator.
 

1. Install setup
Open VAUX-COM_120309a software folder
Open and run VAUX-COM_120309a Application

Accept license agreement
Save file to certain folder

Click “Install” to install software

Installation progress, extracting file to C:/VAUX-COM-120309a+131223d file
2. Install Driver
Click “Extract” to extract FTDI CDM Drivers

Connect op-com cable with computer, system will install driver automatically

Windows 7 will detect USB driver software

Right click Computer>>Manage>>Device Manager>>Universal Serial Bus controllers>>USB Serial Converter to check if opcom driver is well installed

3.Configure VAUX-COM
Right click VAUX-COM120309A+131223d GB software on desktop, select “Run as Administrator”

Loader has been installed into target
Open VAUX-COM 2012V software
Click “Settings” option

Select Interface type: VAUX-COM Revision B, B+
Then click “Test Interface” button

Then software will display firmware version, interface test ended successfully
Press “Save Config” to save settings
Press “OK”
4.Diagnose with OCPOM
Connect Op-com cable with vehicle
Back to VAUX-COM main menu
Select “Diagnostics”
Select “Automatic Vehicle Identification”
Select “KWP-2000” and diagnostic connector
Open will auto detect and display vehicle information
Start to diagnose your vehicle.