How to Register and Update GODIAG GD201 GD202 GD203 Code Readers

Here share the guide to register, update and print data for GODIAG GD201/ GD202/ GD203 obdii fault code readers.

Part 1: How to register GODIAG GD201/ GD202/ GD203?

1. Create an account

Firstly you need to create an account with Godiag and register your tool. This can be done through the update software GODIAG or through the official website.

Select your tool from the list on the Godiag> Support> downloads page and follow the instructions to download the latest version of GODIAG.

Alternatively, you can click the “Sign Up” button on the right upper side of official website to create a user account.

2. Add your Godiag tool to the account

For new users of Godiag products, when you insert TF card into computer and run GODIAG, registration is automatically finished. 

For users who already have one scan tool registered, please register as follows: 

1).To register the tool, you will need the tool's Serial Number and 'Register Password'. You can find these on the tool by selecting Setup> About.

Or you can check the Password Paper in the package. When logged into GODIAG, click the 'Register Products' icon.

2).On the 'S/N Registration' tab, put a tick in the box marked '001' then enter the product's serial number and password, and click Submit.

3). A confirmation box should be shown confirming successful registration. Alternatively, you can register the product in the member center when logged in on our website.

Part 2: How to update GODIAG GD201/ GD202/ GD203?

To apply software updates to the tool, you will need a Windows PC/Laptop and a TF Card Reader.

1.Close the Godiag software, remove the TF card from your tool (make sure the tool is turned off first!) and connect it to the PC via a TF card reader

2.Once Windows has detected the TF card, run the GODIAG software and log in again.

Click the 'My Updates' button

After a few seconds, a list of the available software updates will appear.

Ensure that the correct serial number is displayed in the drop-down list.

3.Click the Update button to download and install available updates

Please note: the update process can take a long time. If your tool has not been updated recently, it may take a few hours for the update process to complete. Once the update has been completed, don't forget to 'safely remove' the SD card in Windows before unplugging it, to avoid the possibility of data corruption.

Kindly notice:

If your free updates ran out, your tool will continue to function- it will not be 'time out'- but you will no longer be able to access the update servers. Should you wish to continue updating your tool? You will need to purchase an update package. Please contact our customer service to purchase.

Part 3: How to print data by GODIAG GD201/ GD202/ GD203?

It’s very easy to print out the test result through GODIAG.

1.Click the printer icon located on the upper side of GODIAG. You can enter the print screen without logging in GODIAG.

2.All data saved/stored in the TF card would appear on screen.

3.Tick a piece of data to either review it or print it out.