wiTech Micropod2 Program Jeep Wrangler 2018 Key FOBIK

Micropod 2 with wiTech software is able to program a new key to Jeep Wrangler 2018.

Car: 2018 JEEP WRANGLER 3.5L V6 24V WT ENGINE UPG I W/ESS

Here you go….

In wiTech software interface,

Select RFH – Misc Functions – Program Ignition FOBIKs

Miropod2 starts to program ignition fobik(s)

Just do as what displayed in the interface

Turn ignition off

Enter the vehicle pin.

The pin can be found by authorized personnel on dealerconnect under Parts – Reference Library – Key Code, On this vehicle, the pin value expires after 12 hours and must be obtained new from dealerconnect every day it is needed

Verify the pin

Press and hold the stop/start button with the top of the fobik being programmed

Continue depressing the stop/start button until the successful message is received

Programming ignition fobik

Programming the ignition fobik successful

Continue to program another fobik or close

Press and hold the stop/start button with the top of the fobik being programmed

Continue depressing the stop/start button until the successful message is received

Reading updated key information

Programming the ignition fobik successful

Test the key and confirm its functionality

Read and clear DTCs

Done!