WiFi Password for BENZ C6 : 12345678 or 123456789
Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Passthru interface is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5.
XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.
Mercedes Benz Xentry diagnosis VCI DOIP Passthru interface C6 Features:
Mercedes Benz Xentry diagnosis VCI DOIP Pass thru interface C6 Summary:
Mercedes Benz Xentry diagnosis VCI DOIP Passthru interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
Mercedes Benz Xentry diagnosis VCI DOIP Passthru interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2. Mercedes Benz Xentry diagnosis VCI DOIP Pass thru interface C6 can't support All Key Lost, needs one key at least.
What is DOIP?
DOIP is ISO 13400 diagnostic protocol
ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.
The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.
The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:
enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.
The mercedes Land Rover JLR all use this new Diagnostic Protocol now.
Where do you need DOIP device?
when we test mercedes new car like w222 w205
In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.
BENZ C6 Diagnostic Tool PCB
1 set BENZ C6 Scanner
Tutorial: how to activate/register latest version 2019.12 Xentry and update vxdiag benz multi tool vci firmware.
The procedure can be applied to:
OEM Benz C6 using VXDIAG solution
How to activate VXDIAG Benz C6 EPC WIS Software?
Open WIS-EPC admin12345 on desktop
Enter User name: admin and password: 12345
Open EWS-net brower
Select Administration->Server->Edit the access authorization
Find WIS/ASRA activation Startkey in Tools folder. Copy and paste ID and activation key to corresponding area. Then press Save.
Note: If it shows unknown LAN-ID error when open EPC-WIS brower, it indicates that you did not install NIC driver. Or uninstall and reinstall NIC driver again.
Go to Programs to check activation status
Activation is done. EPS and WIS successfully registered.
Update Benz C6 VCI Firmware
Open VX Manager driver on desktop
Go to Diagnostic to install Benz driver
Choose Benz program and install benz C6 driver
Press Firmware to run VCI update
Updating vci firmware in progress. Wait until it finished.
VXDIAG C6 Benz multi tool is ready to use.