Godiag FEM / BDC programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and FEM / BDC programming engineers.
Supports working with tools from Lonsdor, AUTEL, LAUNCH, XHORSE ,CGDI, Foxwell, YANHUA MINI ACDP.
Xhorse VVDI Adapters & Cables Solder-free, used together with Xhorse MINI PROG and KEY TOOL PLUS.
GODIAG BMW CAS4 CAS4+ plus FEM/BDC Test Platforms.
Used with AUTEL IM508 IM608 VVDI2 CGDI BMW, Lonsdor K518ISE etc
XHORSE XDNP50 Adapter Used with VVDI Mini Prog & Key Tool Plus
Xhorse VVDI Adapter Kit for Mercedes Benz EIS/EZS Full 10 pcs for VVDI Prog, KEY TOOL PLUS.
Required to access 80 % of Chrysler / Fiat 2018 vehicles
Required to access 100 % of Chrysler / Fiat 2019 vehicles
Access Chrysler / Fiat vehicles using Secure Gateway module, Allow to read and delete codes, Perform active tests
The Chrysler 12+8 Adapter is Autel's bypass for Chrysler's Security Gateway Module (SGM) which limits an aftermarket scan tool to only reading DTCs and viewing data.
Used with AUTEL IM608 IM508 IM600 IM100.
For Nissan Sylphy Sentra (Models with B18 Chassis) Key Adding without Password.
Used with R270 CGDI CG100 XHORSE VVDI Prog Programmer.
Applied to repair the AUDI sixth Gen A6 Q7 Audi C6 steering column lock J518 ELV module failure replacement emulator.
BMW F Series Ethernet Cable for Autel Maxisys Elite MS908 PRO MS908S PRO MS919 MS909 MaxiSys Ultra, used for BMW F series chassis programming.
VVDI Prog Bosch Adapter Read BMW ECU N20 N55 B38 ISN Without Opening, works with Xhorse VVDI Prog.
Provide the best shipping method, EU Warehouse in Stock.
Used with VVDI KEY TOOL PLUS.
Supports all keys lost programming while alarm on.
No need to power off over and over again
Connect with key tool plus solder-free adapters, like XDNP11 BMW CAS3, XDNP12 BMW CAS4, DELPHI, J518 Adapter
Godiag CAS4 / CAS4+ test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 CAS4+ programming engineers.
BMW CAS4 & CAS4+ Test ,working with CGDI BMW and VVDI BMW key programmer.
Cables to VAG - MQB,free shipping with best price.
All 2018 Fiat,Chrysler, Alfa vehicles are equipped with SGW security gateway modules to prevent access to the vehicle from the OBD2 port via a non-original diagnostic scanner. The purpose of this module is to prevent attacks on the vehicle network via the CAN BUS.
Compatible with X300 DP/ X300 DP Plus/ X300 PRO4/ Odo Master/ X200 PRO2 and other programmers (Autel, Launch X431 etc)
The Lonsdor L-JCD Chrysler 2018+ cable can be connected to the vehicle throw Chrysler star connector, Chrysler instrument cluster plug & Chrysler RFHUB computer connector.
After you read out original ECU data,instead of dismantling the new ECU to write the data,
you can use Mercedes Benz ECU ME9.7,272,273 cable to connect KTM100 or KTAG to write the new ECU data into new Mercedes ME9.7 ME 9.7 ECU ECM Engine,