Carprog Full V10.93 With All 21 Adapters Including Much More Authorizations

V8.21 CARPROG Functions:

1. Make the Universal tool - CARPROG inside have powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility's to make on the same hardware Microcontroller programmer, K-line diagnostic, CAN line diagnostic,+5V/+12V output, USB, power supply only from USB.

2. Make the Low Cost tool - with CARPROG basic you will receive many extra functions (like car radio code calculator CC1, EEPROM  programmer and VAG dashboard's programmer by CAN).

3. Make it User Friendly - Windows XP software, works without any installations, for all PC, use USB to PC link, all adapters schematics diagrams on-line.

4. Airbag reset is the best function, and it cannot be done by antenna.

ECU-OPEL - OPEL login reader from motor hybrid ECU. Works with Bosch ME1.5.5, Siemens SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.

OPEL CAN - Opel ECU by CAN programmer - read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU

PSG16 - Opel PSG16 diesel pump by OBDII - read/change mileage, read PIN, reset ECU

OPEC28 - Opel Siemens Simtec ECU Tool Advanced

Carprog full V7.28 vs. carprog v8.21 vs. V9.31

Focus 2008 ....ok
Cmax 2010 ....ok
opel many ecu(bensin and diesel) ....ok
Insignia , Astra 2010 .... error connection
Fiat croma, punto, bravo...ok
Passat b6 2007....ok
hyundai i20 2014 obd...........ok
polo 2014 read dash --fail
octavia ----2007 read immodata fail
skoda fabia clear airbag by 3 wires ok
clio3 2006 dash with 24c04 always change to 137000 0r 131000km cant remember by obd..
astra IV , insignia , octavia 2011 JC online work
Started with clone 4.01, after that bougt 4.74 clone and after a year i bought original dashboard pack. I use both because clone is good for some airbags and opel ecu via obd...it's pretty good tool.
Work fine for Renault Scenic, Laguna, Megane... dash with HC08 and NEC processors with A10 cable without disamble the dash. Work 100%
Megane 1995-1999 Key 100% work
VW Passat 2008 Km 100% work
Opel ECU all work fine

1pc x CarProg Main hardware interface

1pc x A1 - OBD2 Adapter Cable (Inside have K-line and CAN bus switches. Use with all cars complained with OBDII standard)

1pc x D1 - Odometer-airbag Adapter (Dashboard ,Airbag programming adapter )

1pc x A3 - Transponder Antenna (Used with all CARPROG immobiliser software)

1pc x A10 - Motorola Adapter Cable (Motorola MCU programming adapter)

1pc x A11 - BMW EWS Adapter Cable   (Used with BMW Immo software)

1pc x A16 - Car radio Cable   (Used for Opel, Renault, Peugeot, Citroen car radio made by Philips decoding)

1pc x A15 - Cable (Used with D1 adapter, Universal car dashboard and airbag programming adapter )

1pc x A17 - Honda Airbag OBD2 Cable (Adapter for Honda airbag reset by OBDII )

1pc x A4 - Eeprom Adapter Cable   (Used for eeprom programming)

1pc x A5 - DIP8 Clip Cable   (DIP8 Clip for eeprom programming)

1pc x A6 - SOIC8 Clip Cable   (SOIC8 Clip for eeprom programming)

1pc x  A7 - MB 38-Pin Cable   (Used with MB Airbag and dashboard software)

1pc x  A8 - BMW 20-Pin Cable (Used with BMW airbag and dashboard software )

1pc x RNS510 Adapter Cable (RNS510 radio decoding interface cable )

1pc x VOLVO FORD CAN 2006+ Cable   (Needed for airbag and dashboard programming)

1pc x FIAT CAN 2006 Cable   (Needed for airbag and dashboard programming)

1pc x C1 OBD2 Female Cable

1pc x USB Cable

1pc x Power cable

1pc x CD (Software V10.93)