GODIAG GT111 VAG VW Skoda Seat CAN BUS IMMO3/ IMMO 3.5 Test Platform with Pogo PIN

Product Description

ODIAG GT111 VAG VW Skoda Seat CAN BUS IMMO3/ IMMO 3.5 Test Platform with Pogo PIN

Introduction:

GODIAG GT111 for VW Audi Skoda Seat CAN-Bus 3rd & 3.5th generation dashboard IMMO key matching test platform cable with POGO PIN supports VW, Skoda, Seat and other models, using POGO PIN for offline data reading and writing. The product supports synchronization testing of keys and IMMO instruments, intelligent IMMO system emergency start area sensing detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.

It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.

Godiag GT111 Features:

1. Use POGO PIN to read and write data to the dashboard
2. Offline connection to the dashboard to convert to standard OBD2.
3. Perform key chip and instrument synchronization test.
4. Independent ignition switch
5. Key induction adapter with light
 
Godiag GT111 Test Platform User Manual

Intelligent IMMO System Emergency Start Area Induction Detection
 
Press the vehicle's start switch and bring the device's key identifier close to a certain area. If the key identifier light flashes or lights up, it means that the area is the vehicle's key emergency start sensing area. If the customer's smart key is out of power, just put the dead smart key in the key emergency start sensing area to start the vehicle.
 
Car IMMO Start and Start Key Chip Detection
 
Test Result Analysis:
 
1. The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
2. The light of the key identifier flashes for a long time, indicating that the chip key and the vehicle's IMMO system do not match, and the chip key needs to be re-matched.
3. The light of the key identifier does not flash, which means that the vehicle's IMMO system is faulty. Please check the vehicle's IMMO system.
 





How to Connect Godiag GT111 test platform with VVDI2 and cluster?

Package includes:
1pc x Godiag GT111 test platform with Pogo PIN
SUGGESTION:



We are here for you:

Skype: OBDII365.com
Email: Sales@OBDII365.com