Lifetime Free Update LAUNCH Creader Elite 2.0 FGC Ford GM Chrysler Bi-directional Diagnostic Tool Active Test ECU Coding Multilingual Free Update FCA AutoAuth

Product Description

LAUNCH Creader Elite 2.0 FGC Bi-directional Diagnostic Tool for Ford GM Chrysler
 

Based on Android 8.1, LAUNCH Creader Elite 2.0 FGC does almost everything a DIY and a full-function garage would need, from reading codes, all system scan, 100+ resets, active test to ECU coding, and everything in between. Lifetime updating is available for many car brands software built-in (Ford, GM, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Jeep).

Highlights:

1. OE-Level Professional Car Full System Diagnosis

2. Full Bi-Directional Control (Active Test)  + ECU Coding

3. Support 31 More Reset Service functions

4. Lifetime Free Update via Wifi 

5. 11 Language Free Choose: English, Spanish, French, German, Italian, Russian, Portuguese, Japanese, Korean and Traditional Chinese

6. Support Auto VIN Scan + Remote Diagnostics + Diagnostic Feedback

7. 1 Year Warranty for any Quality Problems and Lifetime Free Tech Support

8. Check vehicle coverage: http://qcar.x431.com/qcar/#/pc/index?q=e30%3D

9. 'Mall' Service to purchase more software brands

10. AutoAuth for FCA SGW + PMI

LAUNCH X431 Creader Elite V2.0 FGC vs Creader Elite 2.0 BBA

CRE 2.0 FGC Ford GM Chrysler series full system advanced diagnostics (including DEMO, OBDII, Buick, Cadillac, Chevrolet, Chrysler, Dodge, European Ford, Ford, GM, JEEP, Lincoln, Mazda)

CRE 2.0 BBA Mercedes-Benz, BMW and Audi full system advanced diagnosis (including DEMO, OBDII, Mercedes-Benz, Maybach, SPRINTER, BMW, mini, Rolls-Royce, BMW Brilliance, Volkswagen, Audi, Bentley, Skoda, Bugatti, Lamborghini, Seat, mass business)

Creader Elite Ford Lincoln Functions
Basic functions
Read car computer information
Read car fault information
Read car data stream information
Read car module information

Special Functions: 2014+ models requires network connection.
Programmable Module Installation
Power Balance [Will be launched in Nov. 2024]
Relative Compression
Reset KAM (Keep Alive Memory)
Evaporative Emissions System Test
360 Camera Calibration
Accurate Trim Test
Aftersale Manual Calibration
Apply And Release Test
audio configuration
Audio Speaker Walkaround Test
Auxiliary Vehicle ID Reset
BCM#1(Body Control Module) Crash Status Reset
BECM (Battery Energy Control Module) Battery Charger Fresh Air Door Calibration
Beltminder Enable/Disable
Bleed MASTER
Calibrate A New EPB Module
Calibrate Steering Angle Sensor
Calibrate The Emergency Release
Calibrate The EPB Function Test
Calibrate The Longitudinal Acceleration Sensor
Calibration of Steering Angle
Camera Alignment
Change Setting
Clear Crash Data Memory
Clear Self-learning Data
Clear Stored Clutch Engagement Point
Clear Transmission Adaptive Tables
Clutch System Test
Coal Chute Controls
Configure Both The Yaw Rate Sensor And The Lateral Acceleration Sensors
Configure The Intermediate Shaft
Configure The Lateral Acceleration Sensor
Configure The Longitudinal Acceleration Sensor
Configure The Pressure Sensor
Configure The Steering Angle Sensor
Configure The Steering Column Assembly
Configure The Yaw Rate Sensor
Connectivity Device RKE Programming
Coolant Level Sensor Check
Cooling System Degas
Coupling Calibration Data Writing
Damper Cold Start Initialization
Diesel Particulate Filter (DPF) Manual Regeneration
Diesel Particulate Filter (DPF) Vaporizer System Priming
Diesel Particulate Filter Dynamic Regeneration
Diesel Particulate Filter Static Regeneration
Disable GDM VIN
Disable Transport Mode
DPF (Diesel Particulate Filter) Parameter Reset
DPF (Diesel Particulate Filter) Regeneration Suspension
DPF (Diesel Particulate Filter) Reset
Driver Side Power Window Initialization
Driver Window Motor Test
Driver's Seat Module
Electric Parking Brake (EPB) Parameter Reset/Configuration
Electronic Parking Brake (EPB) Initialization
Electronic Parking Brake (EPB) Service Mode Activation and Deactivation
Emergency Assist Activation
Enable Heated Screens
EPAS(Electronic Power Assist Steering) Configuration
Event Data Recorder Unlock
G Sensor Calibration
Gauge Test
Halt Transmission Adaptive Learning
Headlamp Alignment
Illumination Test
Inclination Sensor Calibration
Infotainment Display Test
Inhibit Longitudinal Accelerometer Monitoring
Injector Correction Factor
Input And Data Test
Keyfob Training
Keyless Entry Keypad Code Reset
Mass Fuel Observed Reset
Microphone Test
Minimum Fuel Mass Adaptation
Misfire Monitor Neutral Profile Correction
Module Initialization
Motor's End Of Travel Learning
Multifunction Output Test
PAD(Passenger Airbag Deactivation Warning) Switch
Park Lock Sensor Calibration
Parking Light Configuration
Passenger Airbag Deactivation Switch
Passenger Airbag Enable/Disable
Passenger Side Power Window Initialization
Passenger Window Motor Test
Passenger Zero Seat Weight Test
Perimeter Alarm
Pneumatic Test
Police Idle
Police Vehicle Top Speed Limit
Pressure Sensor Calibration
Prime The Fuel System
Pull Drift Compensation
Pull Drift Compensation Enable/disable
Radar Aiming
Read The ECU Serial Number
Rear Brake Adjustment
Rear Tones Test
Rear Window Wiper Test
Relearn Vehicle Data
Remote Key Fob Learn
Remote Keyless Entry
Remote Start
Repair Bleeding
Reset Expansion ID
Reset Pressure Sensor Offset
Reset Security ID
Reset the Diesel Particulate Filter (DPF) Differential Pressure Sensor Learned Values
Reset the Diesel Particulate Filter (DPF) Learned Values
Reset the Diesel Particulate Filter (DPF) Pressure Sensor Learned Values
Reset The Diesel Particulate Filter Differential Pressure Sensor Learned Values
Reset The Diesel Particulate Filter Learned Values
Reset Timing Chain Wear Values
Reset/Clear Functions
Resume Transmission Adaptive Learning
Ride Height Calibration
Ride Height Controls
Sensor Height Calibration
Sensor Initialization
Sensor Learn Routine
Steering Motor Angle Trim
Steering Rack Limiter Configuration
Steering Toe Adjustment
Steering Torque Sensor Trim
Steering Wheel Angle Trim
Stop Use Of Transmission Adaptive
Straight Ahead Adaption Angle Reset
System Initialize
Tones Test
Track Key Configuration
Trailer Tow Configuration
Transmission Learning
Transmission Solenoid Body IDN(Identification)
Valve Activation
Valve Calibration
WIF (Water In Fuel) Reset
Windshield Wiper Test
Wing and Airbrake Controls
Workshop Test
YRS Calibration
Zero Speed Test

Creader Elite GM Chevrolet, GMC, Cadillac, Buick Functions

Basic functions
Read car computer information
Read car fault information
Read car data stream information
Read car module information

Special Functions: Supports FCA Autoauth. 2018+ models needs to connect network.
Engine Oil Life Reset
Cylinder Power Balance
Compression Test
Idle Learn Reset
Steering Wheel Angle Sensor Reset
Transmission Service Fast Learn
Automated Brake Bleed
Brake Pressure Sensor Calibration
Diesel Particulate Filter (DPF) Pressure Sensor Reset
Diesel Particulate Filter (DPF) Service Regeneration
Add/Replace Key Fobs
Fuel Compostion Reset
Fuel Trim Reset
Crankshaft Position Variation Learn
Activate Rear Park Brake Service Position
Deactivate Rear Park Brake Service Position
Battery Sensor Module Learn
Tire Pressure Sensors Learn
Injector Flow Rate Programming
Headlamp Leveling Sensor Learn
Exhaust Gas Recirculation (EGR) Valve Learn
Tire Type/Pressure Selection
Transport Mode
Nox Sensor Reset
Autostart/Autostop
Distance Sensing Cruise Control Module
Clutch Pedal Position Learn
Backlight Dimming
Turbocharger Learned Values Reset

Creader Elite Chrysler Dodge Jeep Functions

Basic functions
Read car computer information
Read car fault information
Read car data stream information
Read car module information

Special Functions:
Reset Enhanced Automatic Oil Change Indicator
Cylinder Balance Test
Compression Test
Initialize ABS (Anti-lock Braking System) Module
EPB (Electric Parking Brake) Service Procedures
Electric Park Brake Management
Bleed Brake Procedure
Battery Pack Fan Test
Bleed Brakes ABS (Anti-lock Braking System) Only
Program Tire Sensor Identifications
Learn ETC
Diesel Particulate Filter (New) Initialization
Manual Diesel Particulate Filter Regeneration
Erase Ignition FOBIKs
Program Ignition FOBIKs
Injector Quantity Adjustment
Measure System Air Mass
Write Suspension Height Values
Sunroof Initialization
AFLS (Adaptive Front Lighting System) Calibration
Easy Entry/Exit Feature
Change Language Preference
Exit Shipping Mode
Cylinder Fuel Quantity Correction Test
Cam Crank Relearn
Initialize ORC (Occupant Restraint Controller)
Turbo Actuator Pre-Align
Clutch Group And/Or Clutch Potentiometer Replacement
Initialize Optical Paths
PROXI Alignment Procedure(Replace ECU)
Hybrid Battery Contactor Status
Resolver Offset Learn

Overall Functions

OE-Level Full System Diagnostic

LAUNCH X431 Elite 2.0 BBA can establish a data link to all systems and subsystems of the vehicle being serviced to:

Read all DTC types for full system, view, graph and record data PIDs, support bi-directional controls, actuation test and all other diagnostic functions.

Displays live data in text, graph for easy data review and analysis, record and playbacks live data to pinpoint troubles of sensors and components.

The following is a list of modern vehicle systems that this scan tool can get access to:

-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems

-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System

-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset

-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle

-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics ... and more.

This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.

 

ECU Coding

It allows you to recode adaptive data for certain components after making repairs or replacements, and make the ECU recognize the replaced part. Access the ECU to make full use of the hidden features or disable the car’s annoying functions, like parking assistant, A/C, and activating the auto side mirrors folding function.

Bi-directional Control(Active Test)

The scanner allows you to activate or control a vehicle system or component, it can send commands to the ECU, read ECU data to determine the integrity of the system or component, and monitor the operation of the components, letting you quickly understand whether a specific system, component or subsystem is operating normally,such as turn on the radiator fan, open/close windows, operate mirrors, etc.

4-in-1 LIve Data

This function retrieves and displays live data and parameters from the vehicle's ECU. A pull-down list of the data stream items will appears on the screen. Select the necessary items (Max. 4 items can be selected at the same time) and the screen will display the waveforms corresponding to these items immediately.

Fast Auto VIN Scan

Adopts Auto-VIN technology that will automatically recognize vehicle information which you get the vehicle's make,model and year information more easily and then it will automatically generate a full system Health Report which you can quickly access all the electronic control units of vehicle and generate a detailed report about vehicle health.

31+ Reset Service Functions and Keep updating

1. Steering Angle Reset

Reset the steering angle to zero to keep the car running straight.

2. Injector Coding

Write the new injector code into the car system for the correct cylinder injection quantity.

3. IMMO

Disable any lost keys and add new keys. **ONLY for cars with an easy IMMO system.

4. DPF Regeneration

Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.

5. A/C relearn

The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.

6. ABS Bleeding

Help exhaust the air after repair the ABS pump system.

7. AdBlue Reset

Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

8. Throttle Matching

Initialize the throttle actuators to the default state.

9. TPMS Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

10. Tire Reset

Set the size parameters of the modified or replaced tire.

11. AFS Headlamp Reset

Initialize the adaptive headlamp system.

12. Sunroof Initialization

Initialize the sunroof when locked off or closed.

13. Battery Reset

Register the battery after replacement.

14. Seat Calibration

Calibrate the memory in replaced or repaired seats.

15. Oil Reset

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

16. A/F Reset:

Set or learn Air/Fuel ratio parameters.

More Reset Service Supports

17. GEARBOX LEARN, 18. Transport Mode, 19. Windows Calibration
20. Language Change, 21. Suspension Reset, 22. NOx Sensor Reset
23. Stop/Start Reset, 24. Coolant Bleeding, 25. Brake Reset and More ...
It is important in the maintenance of electronic braking system's safety and efficiency.

(Note: Available maintenance functions vary depending on the vehicle make, year, and model.)

Full OBD2 Functions - Make a Better Detection for Car Engine System!1.Read Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Clear Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitor

3.Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data

4.I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5.Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6.View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.

8.On-Board Monitor Test:Retrieves and displays test results for emission-related Powertrain components and systems.

9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10.Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

DTC Lookup- Accurately identify car problems, avoiding blind maintenance

DTC Lookup is used to search for definitions of DTCs stored in the DTC library and for code breaker information, and Code Breaker is used to provide descriptions of DTCs and helpful tips to deal with DTCs.It is useful for technicians to find the root cause of trouble code faster, saving diagnosis and repair time.

Share and Print Diagnostic Report

All Module Diagnosis automatic diagnostic scanning tool enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet and compared or shared with customers.

LIFETIME FREE UPDATE

LAUNCH Creader Elite 2.0 for GM scanner provides Lifetime Free Update, without extra Fee! Through one-click WiFi updates, you can save time connecting to your computer and make the process faster and more convenient. All features and vehicle models are constantly being updated with high update frequency. You can get the latest and more functions, more compatible car models with update.
 

“MALL” Service

If you want to access to other more car brand, you can purchase the brand software in the Mall.

*Note: NO Need to purchase the Special Functions in the Mall.
 

Vehicle Coverage:

Free Supporte 3 Vehicle Brands

• Compatible with 99% vehicles of Ford, GM, Chrysler from 1996-2024, including 12V cars, light duty trucks, SUVs, hybrid vehicles, minivans, no IP limited.

Autoauth for FCA SGW

• Use the latest software update function AutoAuth to provide systems diagnosis, active test, retrieve module info, ecu coding, etc., making the diagnostics more secure. Applicable to FCA vehicles(Chrysler, Dodge, Jeep, Fiat) equipped with a security gateway module (SGW) in 2017 and later. (Note: There is an annual 50 bucks fee for AutoAuth account, but the payment is charged by AutoAuth directly. LAUNCH is not involved in any transaction process.)

> Fit for FCA Vehicles from 2017-2024 including 300, Pacifica, Challenger, Charger, Durango, Journey, Ram 1000, Ram 1500(DS), Ram 1500(DT), Ram 2500, Ram 3500 Cab Chassis, Ram 3500 Cab Chassis 10K, Ram 3500 Pickup, Ram 4500, Ram 5500, ProMaster City, Cherokee, Compass, Compass (Brazil, China, India, Mexico), Grand Commander, Renegade, Wrangler (JL), Giulia, Giulietta, Stelvio, 500X, 500X, 500BEV, Toro, Doblo, Ducato, Novo Strada, Mobi/... More keeps growing

Access to certain diagnostic functions requires registration and authentication through an approved service (AUTOAUTH) for all aftermarket scan tools. You can buy access for $50 supports unlocking of the FCA gateway to enable enhanced diagnostics on 2018 and newer FCA vehicles (Jeep, Fiat, Chrysler, Dodge).

Launch Creader Elite 2.0 Parameter

Parameter	Value
Screen	3.97 inch
Connector	OBDII connector
Android version	Android 8.1
Storage	2+16GB
Battery	3000mAh
CPU	1.3G
Communication/Update	WIFI 2.4Ghz （b/g/n）
Packing size	76*175*250mm
Storage case size	405*365*280mm
Weight	<540G
Storage temperature	-20~ 70 ℃
Working temperature	-10 ~50 ℃
Package list	Device, main cable, user manual, quick start guide

SUGGESTION:


 


We are here for you:

Skype: OBDII365.com
Email: Sales@OBDII365.com