(Ship from UAE) Original Wifi LAUNCH X431 PAD III V2.0 Diagnostic, Coding and Programming Tool Bluetooth 4 .2
Related Download Files
Product Description
- X-431 PAD Ill V2.0 is the high-end diagnostic equipment newly launched by Launch, integrating the Launch excellent diagnostic technology and made many improvements and innovations.It has deeply optimized the system layer, greatly improved the system responsespeed, and optimized the user experience.
- Free Update Online for 3 yrs, subscription is 599USD/yr after 3 yrs.
Original LAUNCH X431 PAD III V2.0 Diagnostic Tool Bluetooth 4 .2
X-431 PAD III V2.0 is the high-end diagnostic equipment newly launched by Launch, integrating the Launch excellent diagnostic technology and made many improvements and innovations.
It has deeply optimized the system layer, greatly improved the system responsespeed, and optimized the user experience.
What you must note before purchasing X431 PADIII ?
- No Return & Refund Service after registration
- You are supposed to have knowledge of VPN use, because PADIII registration and update needs VPN in Middle East (we will provide free VPN account )
- If you don't like VPN use, you can pay 450USD extra for global version
How to register LAUNCH X431 PAD III ?
Launch X-431 PAD 3 Features:
Can support almost all OBD I and OBD II protocol
Can scan 12V car and 24V truck and bus with the help of HD module
Support remote diagnosis and scan car even though car is 1000KM away from garage
Support online technician’s community where problem can be shared and solutions for that problem can be answered by expert from that field
Can support multi graph display of up to 15 graphs at a time which is one of the largest graph displays in any LAUNCH scanner till date
User can search error code online from device itself and can find solution for particular problem
Bluetooth connector can scan up to range of 10 Meter away car
Online software update : 3 Years Free Online Update
No compulsion for software update every year
Languages : English ,Spanish
LAUNCH X431 PAD3 supported function
LAUNCH X431 PAD3 is the only car scanner in the world which is built to IP65 water proof specifications, with dust proof design and which has passed droop test.
-
Read and clear trouble code
-
Support data stream and actuation test/component testing
-
ECU/ECM programming
-
Battery registration
-
Injector coding
-
KEY coding for Maruti Suzuki (upto 2013),TATA and HONDA(Note: KEY coding is not available for Mahindra car)
-
Immobilizer trouble code reading.
-
Service light reset for BMW, AUDI, Benz, VW, Skoda and many more.
-
Support A.B.S(anti lock brake) function
-
Support E.P.S(Electric Power Steering) function
-
Support Air bag function
-
Steering angle sensor reset
-
Support car A.C( air conditioning system)
-
Support ECM/PCM reset
-
Support Automatic Transmission function
-
Support B.C.M(Body Control Module) including seat belt, Central locking, Light
-
Support adaptation for almost all car
-
Scan radio system
-
Online Coding Available for Euro car brands
X431 PAD 3 Supported CAR brand
EUROPEAN: German Cars ( Audi – BMW – Mercedes – Opel – Seat – Skoda – Volkswagen – Skoda ) , French Cars ( Citroen – Peugeot – Renault ) , Other European ( Ford (Europe) – Fiat – Jaguar – Lancia – Land Rover – Porsche – Alfa Romeo – Rover – Saab – Volvo )
ASIAN: Korean Cars ( Daewoo – SsangYong – Hyundai – Kia) , Japanese Cars (Nissan – Mitsubishi – Isuzu – Mazda – Honda – Subaru – Suzuki – Toyota – Lexus ) , Chinese Cars ( Geely – BYD – Brilliance – Changan – chery – Gonow Auto – Hafei – JAC – Tianjin FAW – Liuzhou Wuling – Xinkai – Zotye – Zhong Xing – Zhong Shun – Changhe – Great Wall (ChangCheng) – Jiangling – Xiamen Golden Dragon ) , Malaysian Cars ( Perodua – Proton ) , Indian Cars ( Mahindra – Maruti – Tata ) , Russian cars ( GAZ – VAZ )
AMERICAN: Chrysler Ford, GM, Work Horse, Chevrolet, Pontiac, Buick, Cadillac, Saban, GMH Truck, Hummer, Ford F Series Trucks, Lincoln, Mariner Hybrid, Mustang, Montego, Ford Motor Home Range, Taurus.
PROTOCOLS: OBDII, EOBDII, EOBDIICANBUS.
LAUNCH X431 PAD III V2.0 Diagnostic Tool Improvements
Optimization of operation
Optimization diagnostic application enhance operation fluency and the higher data stream refresh speed
Preset tool applications
Simplified the device setup
High-end hardware configuration
Extension module for PAD III
1). Sensor box (Optional)
A sensor box is used along with x431 PAD IIl to test most of sensor like MAP sensor, MAF sensor, TP sensor, Oxygen sensor, CAM sensor, Temperature sensor and many more
2).Multimeter
An inbuilt multi meter used along with sensor box to test output of most of sensors.
3).Battery box (Optional)
A battery box used to test 12V battery for almost all cars. Battery box is also capable of testing alternator and starter.
4). Oscilloscope (Optional)
A device is used along with LAUNCH X431 PAD3 to test electronic circuit.
5).Video scope(Optional)
A device which can reach to a place where even our eays cannot reach. Video scope along with X431 PAD2 can make repairing job of technician very simple and easy.
6).X-431 HD Module (Optional)
With help of LAUNCH X431 HD Module, X431 PAD II can even scan commercial and 12V vehicle.
|
Launch X431 PAD3 SPECIFICATIONS |
|
| Display Screen | 10.1″ IPS screen, 1920×1200 |
| CPU | Eight-core, 2GHz |
| Operating system | Android 6.0 |
| RAM | 2G |
| Storage capacity | 64G SSD |
| WLAN | WiFi (802.11 b/g/n) |
| USB | 2.0 |
| Bluetooth | 2.0 |
| Working temperature (ºC) | -10~+55 |
| Storage humidity | 20-90% |
| Storage temperature (ºC) | -20~+70 |
| Camera | Front 2.0M, rear 8.0M, AF with flashlight |
| Battery | 15000mAh lithium-polymer battery |
| Audio Input/Output | Microphone, Speakers, 3.5mm stereo headset jack |
| Video output | HDMI |
Packing List:
1set LAUNCH X431 PADIII Scanner
Guide: Benz 722.9 Gearbox Online Programming with X431 Pad III
We are here for you:
Skype: OBDII365.com
Email: Sales@OBDII365.com
Whatsapp for Sale: +86 18259252285
Whatsapp for Tech Support: +86 18150118226
Videos
How to Register Launch X431 PAD III v2.0?
Launch X431 PAD III Function Introduction
Tech Support
The diagnostic method on Launch X431 PAD 3 is different for passenger vehicles and commercial vehicles (gasoline and diesel). The possible communication can be:
WiFi, Bluetooth and USB cable.
Passenger vehicles:
X-431 PAD III tablet supports 2 communication methods with the VCI connector:
wireless Bluetooth and USB cable.
You may choose any one of the methods to diagnose a vehicle.
*Notes:
- While using the diagnosis via Bluetooth, the VCI connector should be paired with the tablet. If no Bluetooth setting is done before diagnostic software is launched, you can also configure it while using the software.
- To obtain stable communication, you are strongly recommended to perform the vehicle diagnosis via USB cable. In this case, the USB cable is required to connect the VCI connector and the tablet.
- Communication via Bluetooth:
There are two kinds of ways available for the tablet III to pair with the VCI connector.
- Connect one end of the USB cable (optional) to the Mini USB port of the VCI connector.
- Connect the other end to the USB port of the PC. The power indicator of the VCI connector lights up.
- Enter Bluetooth setting screen by tapping “Tablet Settings” -> “Bluetooth”, slide the Bluetooth switch to ON and the tablet starts searching for all available Bluetooth device.
- Tap the desired VCI connector to pair and match. By default, the Bluetooth name of the connector is 98********00 (where ***** stands for 8 digits.).
- If the Bluetooth pair request pops up on the screen, enter the request pin code (default code: 0000 or 1234).
- Once the connector is paired with the tablet, “Paired” appears and the connector will be shown under the paired device tab.
*Note: In case no Bluetooth setting is done before diagnostic software is launched, you can also configure it in process of vehicle diagnosis.
- Communication by a USB cable:
The USB cable connection is a simple & quick way to establish communication between the tablet and the VCI module.
After properly connecting the USB cable from the tablet to the VCI, the VCI navigation button at the bottom of the screen becomes highlighted indicating the USB connection is successful.
*Note: The USB connection provides the most stable and fastest communication. When all communication methods are applied at the same time, the X-431 PAD III system will use the USB communication as the default priority.
Commercial vehicles (Gasoline & Diesel):
X-431 PAD III tablet supports 3 communication methods with the VCI connector:
wireless Bluetooth and USB cable.
Choose any one of the methods to diagnose a vehicle.
*Notes:
- While using the diagnosis via Bluetooth, the VCI module should be paired with the X-431 PAD III tablet. If no Bluetooth setting is done before diagnostic software is launched, you can also configure it while using the software.
- To obtain stable communication, you are strongly recommended to perform the vehicle diagnosis via USB cable. In this case, the USB cable is required to connect the VCI module and the X-431 PAD III tablet.
- To ensure that the X-431 PAD III tablet can work with the VCI module via Wi-Fi communication, a Wi-Fi configuration is required. Refer to Chapter 4.5.3 for details. When all communication methods are applied at the same time, the X-431 PAD III system will use the USB communication as the default priority.
- Communication via Bluetooth:
- Enter Bluetooth setting screen by tapping “Tablet Settings” -> “Bluetooth”, slide the Bluetooth switch to ON and the tablet will start searching for all available Bluetooth devices.
- Tap the desired VCI module to pair and match. By default, the Bluetooth name of the VCI module is 98********00 (where ******** stands for 8 digits).
- If the Bluetooth pair request pops up on the screen, input the request pin code (default code: 0000 or 1234).
- When pairing is successfully done, the VCI module will be shown on the top of the “Paired devices” list.
*Notes:
- To make sure that the tablet has paired up with the VCI module via Bluetooth, “Personal Center”-> “VCI Management” to check whether the VCI module is paired up or not.
- If you logged in the account on another diagnostic tool and the VCI module has ever been paired up with that tool, you need to cancel pairing first before using a different tool to proceed new diagnostic session. Tap “Tablet Settings” -> “Bluetooth” -> Tap the desired VCI connector to unpair it.
In case no Bluetooth setting is done before diagnostic software is launched, you can also configure it in process of vehicle diagnosis.
- Communication by a USB cable:
The USB cable connection is a simple & quick way to establish communication between the tablet and the VCI module.
After properly connecting the USB cable from the tablet to the VCI, the VCI navigation button at the bottom of the screen becomes highlighted indicating the USB connection is successful.
*Note: The USB connection provides the most stable and fastest communication. When all communication methods are applied at the same time, the X431 PAD III system will use the USB communication as the default priority.
- Wi-Fi communication
- After logging successfully, tap “Personal Center” -> “VCI Management”.
- Check the box “Use Wi-Fi communication mode”, the system will search for VCI module automatically.
- Tap the desired VCI module and a pairing request similar to Fig. 4-19 will appear:
- Tap “PAIR” to start pairing. Once the pairing is successfully done, the screen displays:
- There are two Wi-Fi communication modes available for the VCI module.
– Work as Wi-Fi hotspot: Once enabled, the VCI module and then tablet automatically connect and form a LAN network to make communication. In this case, the tablet cannot surf the Internet. – Work as network adaptor: Once enabled, a Wi-Fi connection dialog box appears
Input the Wi-Fi network name and access password (if the network is encrypted) until it is properly connected. In this case, the tablet can surf the Internet and communicate with the VCI module.
…. Start diagnosis….