The New Genius is the world’s first Touch & Map device which allows reading / programming the ECU in modern vehicles over OBD2.It is able to work without connection a computer during the critical phases of reading and writing of the ECU, ensuring the process is executed in complete safety. As a completely independent tool, the risks of working with a PC can be avoided, risks such as stalling, Windows crashes, power failure etc…
New Genius & Flash K-TOUCH K TOUCH Point OBDII/BOOT Protocols ECU Supprorts All Vehicle Catgeories
TOP 10 Reasons to get K-TouchECU Tuning Tool :
1.Easy to use ,with touch screen and intuitive menu.
2.Completely independent of the PC during the phases of read/write.
3.Newest Hardware: 5.005, Newly Add More ECU Models, Like VAG DQ500 and VAG DQ250
4. World’s first Touch & Map device, allows you to read/programm the ECU in modern vehicles through OBD2
5.System updates via USB,automatically backup.
6.No tokens limitation. With Tokens reset button on the main unit. Just click this button and token will be charged.
7.Kess V2 Update Version, Supports More Vehicles, directly connect cars and K TOUCH to read the data. Just install the software on PC to modify the data.
8.With ECM1.61 and Winols 2.24 inside the package
9.Supported Languages: English, Italian, German, French, Spanish, Portuguese and Hungarian
Note: Never connect Network, operating system can be on WIN XP and WIN7.
The New Genius K-touch supports CAN-BUS, KWP and J1850 protocols and has communication modules available for the following vehicles:
Cars
Bikes
LCV
Equipped with a sophisticated system for the recovery of the ECU should any problems occur during programming.
The New Genius is controlled through a system of icons from your TOUCH PANEL touchscreen, this makes it extremely easy to use. A standard 16 pin OBD cable is included and specific connectors to work on making diagnosis and special cables to do so through direct connection to the connector or plate ECU.
Genius ECU Programmer Technical Specifications:
ABS plastic enclosure with ergonomic grip system safe.
LCD display 320 x 240 pixels, CCFL back light with Touch Panel.
Flash memory chip 512K bytes protected.
16 MB RAM memory.
SD card of 1 GB expandable.
LED status SD.
Internal clock with memory.
Lithium 3 volts.
Rechargeable battery 600 mAh 8.4V.
Supply voltage from 12V to 30V.
Communication via K line, L line, CAN-bus 2.0 and J1850.
Available in Master version
As a consequence of the requests received from the market, a specific software has been developed for the independent management of New Genius called DS Manager. This is dedicated to skilled tuners who prefer to develop tuned files with third party editing software. DS Manager can decrypt and encrypt files received from New Genius, so allowing the possibility to export files for the modification. No editing functions are supported. Also for this specific software, a specific tool for the automatic checksum recalculation is provided.
When you install PC software ,if it pops up below error,please try to download in the CD,you can also download from : https://mega.nz/#!0YQkXI6C!ubU19RfbmKmSG3SzuAiAPldQHCGsvSA-U7unpYezbvs
Genius & Flash K-TOUCH Test on cars:
Simos 18 tested ok. Don't know about simos 12
Tested on many cars Kline an Can and work 100% fine only checksum need to do manually
All simos,denso mitsu ..all ok
Tested on tricore edc17c10 all ok
EDC17C64 ID & WRITE ok (1.6TDI)
MED17.5.5 ID & READ & WRITE ok
ME7.5 ID & READ & WRITE ok
MED17.5.21 ID & WRITE ok
Sagem 3000 ID & READ & WRITE ok
Opel ME7.6.2 ID & READ & WRITE ok
Mercedes EDC16C2 ID & READ & WRITE ok
Simos 12 & 18 ID & WRITE ok
Checksum recalculated with Genuine Race Evo software for all of my tunes.
2014 Ford Fiesta Ecoboost 1.0 125hp auto
-> Read ok
-> Write ok
2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT
-> Read ok
-> Write ok
2014 Chevrolet Orlando 1.8 Petrol Auto
-> Read ok
-> Write ok
2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto
-> Read ok
-> Write ok
Can make Opel Zafira , Combo , Meriva Denso ECU
Tested psa edc17c10 read on boot and test write by obd ok
No support Toyota obd only write med17.5.2. and 17.5.21 (not tested)
Note: Please disconnect network connection when installing and using K-touch!!!
Step 1: Install K-touch Setup
Open My Computer
Open K-TOUCH software CD
Open K-TOUCH-E folder
Open Abode Reader 9
Accept license agreement
Read the K-touch user manual first
Open and install K-touch Setup
Click Next
Click Install
Select setup language
Click OK
Press Next
Setup wizard installation completed
Restart the computer
Your computer needs to be restarted before Race EVO Setup 1…
Click OK
Step 2: Register & Activate K-touch
Open CD software
Open K-TOUCH-E folder
Open K-touch Setup
Install setup wizard again followed the same procedure above
Click Next
Click Install
Select setup language
Click Next
This time to install Race EVO Setup 1
Click Next
Click Next
The next program will requires user to enter User Registration code (leave others blank)
Open the Adobe read me file again
Copy C7535 and paste it to Dimensione Sport Customer code column
Click Next
Click Next
Click Next
Race EVO setup is well installed
Remove the tick “Run Race EVO (rev.431 build 829) Setup 1 now”
Click Finish
Complete install K-touch setup
Click Finish
Step 3: Connect Genious ecu tuning tool with computer
Tips
Connect Genious OBD2 ECU programmer with power adapter, then wait until the machine boot. If the machine cannot boot, please turn off power then connect to power again. Wait until machine boot.
Connect the K-touch programmer with computer/laptop via USB cable, then start to read K-touch data
After well connected the machine
Install hardware wizard
Select “Install the software automatically (Recommended)”
Click Next
The wizard has finish installing the software for DimSport-New Genius Device
Click Finish
Open My Computer->Manager->Device Manager->Universal Serial Bus controllers-> DimSport-New Genius Device to make sure the ECU programmer is well connected with computer.
Step 4: Read & write K-touch data
Open K-touch software on desktop
Click “Accept definitely” to accept software license
If the system pops up “Please update database in Internet and enable technical features (this procedure must be completed within 3 days 333)” message, click NO to proceed
Click K-Touch tab->Explore
If the system prompts “GENIUS is not updated”, click OK
Explore to FILE folder
Open Read folder
Save 000 file to desktop
Extract header, click Yes
Back to Genius:\FILE, open Write folder
Click Import icon
Select Import file, click OK
Import the file “000” just saved on desktop
Read and write ktouch data completed. You can check the device information.
Back to Genius folder
Click Help tab->System information to check files with date, time and version
Click Help-> Information about…to check Genius K-touch device information