This VP598 is upgrade version of VP390 Wellon programmer,it Covers all function of VP390 and supports even more .you are allowed to be online update.
Original Wellon VP598 Universal Programmer (Upgrade version of VP390/VP-390)
Wellon VP598 Features:
Electrical spec. of the AC adapter: AC input 100V to 240V, 50/60Hz, DC output 9V/0.6A
48 Pin ZIF socket with Popular pin-drivers.
Interface with LAPTOP, PC or compatibles through USB port
Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record
Manages 16 and 32-bit word split (Set Programming)
Features Test Vector capability and multiarray fuse map editor
Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices
Optimum programming for each individual device
Automaticly Identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC
Device insertion and poor-pin-contact check
Support 1.5v Low voltage devices
Not need exterior adapter for mostly devices.
Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters
Auto-run mode starts programming automatically upon detection of chip insertion
Supports WindowsXP/Vista/ Windows 7 (32bit and 64bit)/ Windows 8 (32bit and 64bit)
Supports ten languages,such as Chinese(Simplified),Chinese(Traditional),English,Korean,Poland,Italian,Portuguese,Dutch, Turkish and Hungary.
Wellon VP598 Support:
PROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory
PLD: CPLD, EPLD, GAL,PEEL,PALCE and more
Microcontroller: Atmel, Intel, Microchip, Signetics, Zilog, etc.
TTL (74 series), CMOS (40/45 series) Logic IC
DRAM SRAM memory device
Wellon VP598 Updates:
WEILEI updates software and device algorithm regularly. You can get the latest software free of charge through internet
Programmer,cable, manual, software included
15 day moneyback guaranty, one year warranty
Warranty & Technical Support:
Programmer is warranted to be free of manufacturing or workmanship defects for one year from the date of purchase.
1pc x Wellon Programmer VP-598
1pc x USB cable
1pc x VP-598 Manual
1pc x power adapter
We are here for you:Skype: OBDII365.comEmail: Sales@OBDII365.comWhatsapp :
When Wellon VP598 universal programmer is connected with the computer, it will perform an auto system test, and stop all options if any error is found out like communication error, programmer error, or IP programmer trouble. All possible reasons and solutions here for you all!
A program error may occur if the manufacturer and device of selected chip is wrong. And it may occur by a damaged chip. It may also occur by a wrong device insertion. For PLD, it may occur by a security chip.
For some old chip, you can add tPW to program successfully. From the main screen, use the mouse to click on the Setting menu, then click on the Modify Algorithm Parameter sub –menu. And add tPW.
Along with the development of chip techniques, the chip algorithm parameter gets changed which creates problem to program the chip. You should update the software regularly & check for updates.
When the socket is smudgy or is beyond its life cycle? It causes loose contact. The life cycle of the socket is about 10 thousand times, after which please replace the socket with a new one. Select insertion test, it will inform you the status of the same.
- Reason 1:
A communication error may occur if a device is locked in the programmer’s ZIF socket when invoking any of the software routines.
- Solution 1:
Make sure the socket is empty when invoking any of routines. Once the menu is on the screen, you can lock the ZIF socket by pulling down the lever.
- Reason 2:
A communication error may also occur if the programmer is not connected with the PC port properly, or if the power switch turns off.
- Solution 2:
If your programmer that had the function of update online lost its program, you can resume it
(Wellon programmer VP-390/596/996/GP204/GP204S/GP800/GP600/GP400/ISP200/ISP208/SP108)
1 Open the cover.
2 Find JP1(J1) and short circuit it with a jumper or screwdriver. Connect to the PC and wait for the
device to be detected (the LINK LED will light), then remove the short circuit from JP1(J1).
3 Enter the software and wait for it to complete initiation.
4 Choose System Update from the Help menu and wait for it to finish.
5 Take out USB connecting cable, assemble it, reconnect it and enter the software again.
ID Programmer error!
- Error message:
“Programmer trouble! ID:...”
Please run c:\weilei\wellon\wellon_reset.exe to reset your programmer. If show “sys update ok!”, then update ok, programmer ID resume.