1. You are disallowed to use this newest dongle to update the older version Xprog to V5.74
2. Close all of the computer anti-virus software. If not, X-prog software may be killed.
3. Disconnect the internet. If not, the internet may damage the hardware.
4. Uninstall all the old version xprog-m or xprog box software before you install V5.7. 0 software we provide , because our xprog-box hardware is not compatible with other lower or higher version software, otherwise the hardware will be damaged and will lose its warranty...
5. Never try to UPDATE, the hardware will be damaged if you want to try to upgrade it online, without any warranty.
XPROG-M V5.74 Authorizations:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014
XPROG-M V5.74 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
Xprog 5.74 has additional authorizations shown as following photos:
MCU/MPU->infineon{XC16x}->SAK-XC164CS-16F
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S12XD->MC9S12XDx128_EFPROM
MCU/MPU->Fresscale9S12XD->MC9S12XDx128-EFPROM-secured
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XHY->MC9S12XHY128_D-FLASH
MCU/MPU->FresscaleMPC55xx->MPC5515_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
Immobilizers->Yamaxa->T-MAX_TYPE_I_9S12T64
Other ECU ->Chrysler-DodgeJeep->BCM-GRAND_CHEROKEE_WK_2014_Flash
Other ECU ->GM ECU->SAF-XC164CS-16F
Other ECU ->HONDA Bikes->CB650F 2015_Code_Flash
Other ECU ->Renault ClioOther ->EPS_ST10F269
Other ECU ->Renault Modus ->ECU_SAK-XC164CS-32F
Airbag(XC2xxx)->FR3T-14B321-AF(XC2336A-72)->FR3T-14B321-AFflash0
Airbag(SPC560xx)/MPC560x)->Honda_CR-V(SPC560P50LS)->Code_Flash
Xprog 5.74 Software Display:
2016 latest version Xprog V5.70 software has not operating system limitation. Here is the instruction on installing Xprog-M 5.7 with USB dongle on Windows 7 64-bit step by step.
Xprog version:
software: v5.7.0
firmware: v3.9
Operating system:
Windows 7 Professional 64 bit operating system
4.00GB RAM
No network connection and anti-virus program !!!
Ready to install XPROG 5.7.0:
Open DVD disk (D:)
Copy all files to Desktop, ready for use
Part 1 – Install Adobe Reader XI
Run AdbeRdr11000_zh_CN application to install
Preparation steup…
Click Next
Auto install, click Install
Installing Adobe Reader XI…
Adobe Reader XI installation success. Click Finish
Part 2 – Install Registry Editor
Run The registry
Yes to continue
Keys and values have been successfully added to the registry. Click OK
Part 3 – Install driver software and computer management setup
Open folder XPROG-BOX5.7.0English on Desktop
Then open XPROG-BOX5.7.0English-> XProgDesktop application
Accept the agreement
In the Xprog-m v5.70, you will find that Port Undefined
The system also prompts “Device driver software was not successfully installed”
Click the prompt info (xprog box: no driver found) and click Close
Open Computer Management
Select Device Manager-> XPROG-BOX
Right click for Update Driver Software…
Browse my computer for driver software manually
Browse Desktop/ XPROG-BOX drive/ WINDOW 7
Then OK.. Next
Install this driver software anyway
Windows has successfully updated your device software. Click Close
Back to Computer Management
Select Device Manager-> Other Device-> USB Serial Port
Right click for Update Driver Software…
Browse my computer for driver software manually
Browse Desktop/ XPROG-BOX drive/ WINDOW 7
Then OK.. Next
Install this driver software anyway
Windows has successfully updated your device software for XPROG-BOX programmer (COM3). Click Close
In Computer management, Ports (COM & LPT)-> XPROG-box programmer (COM3)
In xprog m software v5.7.0, Port COM3 (XPROG-box)
Part 4 – Run Xprog V5.70 software
XPROG-BOX 5.60 programmer read and write MCU MC68HC908GR16_FLASH+security
Done!