- GM original software is compatible.
- High-quality Vauxhall/Opel dealer diagnostic interface, used with Global TIS, GDS 2, Tech2Win software.
- For all GM CHEVROLET BUICK CADILLAC GMC HUMMER PONTIAC SAAB Vauxhall/Opel 16 pin vehicles from 1996 to 2022.
WIFI GM MDI 2 Multiple Diagnostic Interface GM Diagnostic Tool
- High speed and low-speed GMLAN
- Automatic vehicle recognition
- DTC reading and removal
- Complete list of live data streaming for all main ECU
- Recordable/playback of live data
- New software flash for existing ECU to fix drivability issues
- Programming and installation of new ECU (PCM, ABS, Instrument cluster, airbag, fuel pumps, etc.,)
- Programming new keys
- Setting/removing speed limiters
- More dealer specific functions
- GM original software is compatible
- GM Tech2 Supported Protocols: UART, Class 2, KWP2000,GMLAN (CAN)
- Supports online programming function with GM SPS Subscription
- J2534 pass-thru offering ECU re-flash and diagnostics for other vehicle manufacturers, when subscribed to their specified software
1. If you don't have software, please check V2020.09 GM MDI GDS2 Tech2win software Sata HDD
2. For FD CAN protocol, the original GM MDI2 Scanner is recommended.
1pc x GM MDI2 Main Unit
1pc x DLC Cable SAE J1962
1pc x 10-ft USB A to USB B Cable
The J2534 Configuration Application
The Multiple Diagnostic Interface (MDI) is a J2534 device that connects between your computer and the vehicle J1962 DLC connector for pass-thru programming of the vehicle ECU.
The J2534 Configuration Application is installed onto your PC at the same time as the MDI Manager software allowing you to control how your TIS 2 Web application will connect to an MDI.
In addition, this application provides API Monitoring controls to aid in investigating problems encountered while using any J2534 devices (including the MDI).
To launch the J2534 Configuration Application from SPS, press the configuration button on the Diagnostic settings screen.
GM MDI 2 Funtions:
* Automatic vehicle recognition
* DTC reading and removal
* Complete list of live data streaming for all main ECU
* Recordable/playback of live data
* New software flash for existing ECU to fix drivability issues
* Programming and installation of new ECU (PCM, ABS, Instrument cluster, air bag, fuel pumps, etc.,)
* Programming new keys
* Setting / removing speed limiters
* J2534 pass thru offering ECU re-flash and diagnostics for other vehicle manufacturers when subscribed to their specified software
Check Engine Compartment for components that may be loose; kinked or pinched vacuum hoses or electrical connections, and for any other missing or disconnected components.
Check to assure that hoses and electrical wires are properly routed to provide sufficient clearance with adjacent moving or hot parts.
Observe the movement or freedom of movement of linkage, valves, and other components.
Check for unusual noises within the engine compartment.
Visually inspect for seepage and leaks at hoses and pipe connections, seals, gaskets, and plugs.
Tighten clamps and connectors as necessary.
Check power steering gear, lines, and hoses for leaks and clearance with adjacent panels, moving or hot parts. Tighten clamps and connectors as necessary.
Test engine coolant protection.
Check all fluid levels; engine oil, transmission oil, power steering oil, battery, brake, and cooling system.
Add inspection items as needed
Check throttle linkage for freedom at wide open and closed throttle.
Check tension on all belts.
Check operation of all interior and exterior lights;
Road test on a route with road conditions permitting the proper evaluation of squeaks and rattles.
During this test, check the following items for proper operation and function;
Visually inspect vehicle undercarriage for looseness, missing components, and line routing and clipping, and fluid leaks. – Tighten clamps, couplings, and connectors as necessary.
Data transfer and Electronic Control Unit (ECU) reprogramming
Shop network communications (LAN and WLAN)
Future expandability, including diagnostic applications
For immediate use — At present, vehicles have two buses on the 16 pin connector
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for the previous vehicle
GM MDI 2 (SP163-E) WiFi Version PCBs
We are here for you:Skype: OBDII365.comEmail: Sales@OBDII365.comWhatsapp for Sale:
+86 18259252285Whatsapp for Tech Support: