![[In Stock] Xhorse XDMQBAGL MQB48 Adapter for VVDI MLB Tool Collects NEC35XX IMMO Data No Tokens Required](/upload/pro/25022417404643432414.jpg)
![[In Stock] Xhorse XDMQBAGL MQB48 Adapter for VVDI MLB Tool Collects NEC35XX IMMO Data No Tokens Required](/upload/pro/25022417404643475230.jpg)
![[In Stock] Xhorse XDMQBAGL MQB48 Adapter for VVDI MLB Tool Collects NEC35XX IMMO Data No Tokens Required](/upload/pro/25022417404643501636.jpg)
![[In Stock] Xhorse XDMQBAGL MQB48 Adapter for VVDI MLB Tool Collects NEC35XX IMMO Data No Tokens Required](/upload/pro/25022417404643544934.jpg)
![[In Stock] Xhorse XDMQBAGL MQB48 Adapter for VVDI MLB Tool Collects NEC35XX IMMO Data No Tokens Required](/upload/pro/25022417404643595141.jpg)
[In Stock] Xhorse XDMQBAGL MQB48 Adapter for VVDI MLB Tool Collects NEC35XX IMMO Data No Tokens Required
HERE ARE ITEMS STOCK IN EU
HERE ARE ITEMS STOCK IN UK
HERE ARE ITEMS STOCK IN US
Need drop-ship service or to be a GODIAG dealer? We are here for you:
Email: Sales@OBDII365.com
WhatsApp : +86 18350207975
Related Download Files
Product Description
VVDI MLB Tool adds MQB48 NEC35XX immo data collection function.
XHORSE XDMQBAGL MQB Adapter, with MLB equipment, does not need to disassemble the instrument but only the key, and only needs to solder two wires. With low risk, simple operation, it can add keys for most MQB48 keys.
Features:
No need to disassemble the instrument.
Easier to read key data and add keys.
No points/tokens required to use MQB48. (NOTE: KYDZ tool does requires tokens, $15 each)
Works on PC or Key Tool Plus (coming soon)
Free download MLB Tool 2.0.5.0 software to fix voltage problems in App.
Function:
Similar to MLB, open the key, read data and program additional key.
This new tool is for MQB48 Megamos AES.
Read immo data (CS code) from mqb working key on the MQB48 platform so can add keys without take the cluster to read on bench.
Data Collection Time:
Good power supply: ~15 minutes for data collection, ~1 minute for immobilizer data calculation.
Average power supply: ~30–60 minutes for data collection, ~1 minute for calculation.
Note: It will also connect with key tool plus to collect immo data. But tablets with a single Type-C port have poor power stability, leading to longer collection times and lower success rates. Strongly recommend using a PC.
PC calculation takes 4 minutes while key tool plus takes more than 10 minutes. key tool plus menu path will be: IMMO Programming—VW—Select by type—MQB instrument immo system—NEC35xx (Continental/VDO)—
For MQB48 and 5C chip only. Cannot collect immo data MQB49/5C from key.
Check Technical support column to see how to use VVDI MLB Tool with MQB48 adapter.
How to Connect VVDI MLB Tool with MQB48 Adapter?
VVDI MLB Tool MQB48 Wiring Diagram
Need to remove one capacitor (value 0.1uF) and solder socket cables.
Packing List
1pc X Xhorse XDMQBAGL MQB48 Adapter
SUGGESTION:
We are here for you:
Skype: OBDII365.com
Email: Sales@OBDII365.com
Videos
How to Use Xhorse MLB TOOL MQB48 Adapter to Add MQB48 Key
How to replace chip on VVDI MLB Tool to use MQB48 Adapter
Tech Support
Xhorse VVDI MLB Tool released MQB48 NEC35XX immo data collection function without disassembling the instrument but only the key. Follow the steps below to update your VVDI MLB Tool firmware to use MQB48 adapter.
Part 1: How to Modify VVDI MLB Tool to use with MQB48 adapter
Part 2: How to collect immo data with MLB Tool
Part 1: Modify VVDI MLB Tool Hardware
The MQB48 adapter comes with solder wires and an enhanced version replacement chip.
Remove 4 screws on the back of the MLB tool and open the shell.
Remove 2 screws on the main board and check out the other side.
This is the front of the main board.
Replace this chip using the enhanced replacement chip in the package.
After replacing the chip, reinstall the VVDI MLB Tool.
Part 2: How to Collect IMMO Data with MLB Tool
Run VVDI MLB Tool software. Choose MQB48 function and check wiring diagram.
Select the corresponding wiring diagram. Here the key board is the same as type 5.
Need to solder 2 wires, black wire and red wire.
Remove a capacitor, the solder the red wire (near the IC position).
Open the original key shell.
Remove a capacitor as shown in the wiring. Then solder two wires.
Connect Xhorse XDMQBAGL MQB48 Adapter with MLB Tool.
Connect Key board with MQB48 adapter. Place the key to coil of MQB48 adapter in the vertical direction.
NOTE:
The MQB48 adapter has strict power supply requirements during data collection. Use two separate USB cables to power the MLB main unit and the MQB48 collector. Do not use charging adapters.
The MLB main unit does not require 12V power.
Then connect MLB Tool with PC via USB cable.
Read key information. Read Key ID successfully.
Press Collect Key data.
Collecting key data and calculating immo data.
Calculation finished. Restore key back to original status. Save MQB NEC35XX immo data.
Data Collection Time:
Good power supply: ~15 minutes for data collection, ~1 minute for immobilizer data calculation.
Average power supply: ~30–60 minutes for data collection, ~1 minute for calculation.
Resolder the capacitor back to the key. Reinstall key shell. This is very important !!!
NOTE:
Removing the wrong capacitor can cause the MQB chip to become unrecognizable, making it impossible to collect data.
After reading the data, the capacitor must be restored; otherwise, the key cannot be programmed to car.
If need to connect MLB tool with key tool plus to collect immo data with tablet, make connection like this:
Note: Tablets with a single Type-C port have poor power stability, leading to longer collection times and lower success rates. Strongly recommend using a PC.
After collecting immo data with MLB tool, connect VVDI2 or VVDI Key Tool Plus with vehicle via OBD connector.
Go to MQB anti-system system (NEC35XX Continental/VDO), read cluster info.
Load immo data saved by MLB Tool.
Then generate dealer key and learn key.