Product Description
Yanhua Mini ACDP R7F701401/21-5D Interface board which is used for MQB 5D cluster mileage correction. NO NEED soldering
Yanhua Mini ACDP VW MQB 5D Cluster R7F701401/21-5D Interface Board
Require
module 34 authorization.
Interface board only. Does not include license and ACDP host.
For mileage correction only. Cannot decode IMMO data.
Support models (not limited to)
Golf 8, Teramont, Viloran, Tavendor, Lamando, Tiguan L...
Support cluster numbers:
5GD920340A, 5GD920340C, 5HG920340, 5HG920340A, 5HG920340B, 5HG920340C, 5H0920340A, 3JD920340...
Supports chip models:
R7F701401, R7F701421
Interface board features:
1: Using a quasi-blind plug-in interface board, No soldering, No need to pry up the chip pins, No capacitor removal, No soldering required to read and write data without damage.
2: The third-generation PCB interface board locking technology independently developed by YanHua Tech makes the interface board locking more accurate and firm.
3: The software comes with pin detection function, making data reading and writing safer and more reliable.

Menu Path:
SUGGESTION:
We are here for you:Skype: OBDII365.comEmail: Sales@OBDII365.com
Tech Support
How to Install Yanhua ACDP MQB 5D Interface Board?
1.Find the interface board installation area on the instrument according to the visual
positioning mark on the interface board.

2. Remove the corresponding two screws

3. Locate the D1-D4 positioning holes correctly on the instrument panel

4. Align the interface board with the screw fastener holes and D1, D2 positioning points

5. Press down on the interface board

6. Tighten the screws

7. Confirm again that the interface board D1, D2 positioning pins are completely aligned with the D1, D2 positioning holes of the instrument.

Finish installing the 5D interface board.
