[With License A51E] Yanhua Mini ACDP Module 27 BMW MSV80 MSD8X MSV90 DME Read/Write ISN and Clone

Videos

Tech Support

There are three ways to read BMW MSV80 MSV90 MSD85 MSD81 MSD80 etc DME ISN with Yanhua Mini ACDP,

• Open DME shell to read ISN (ACDP Host+ Module 3)
• OBD/CAN mode (ACDP Host+ Module 3+ Interface board)
• Bench mode (ACDP Host+ Module 27 interface board+ A51E license)

Way 1: Open DME shell to read ISN

The traditional method requires ACDP host + module 3.

Menu path:

BMW->DME ISN->Open shell to read ISN->E or F series

Press "Help", ACDP will show you instructions and connection diagram. 

*MSV90 can be read by OBD and Bench mode only.

Way 2: OBD CAN Mode

You will need ACDP host + module 3+ interface board

ACDP released different interface boards for different DMEs, check https://www.obdii365.com/producttags/acdp-interface-board.html

Menu path:

DME ISN->OBD/CAN Mode Read/Write ISN->Read MSV80/MSV801 DME ISN

ACDP will show instructions and connection diagram as well.

Way 3: Bench mode

You will need ACDP host+ module 27 (module 27 comes with interface board and license A51E)

Menu path:

DME ISN->Bench Mode Read/Write ISN->Read MSV80/MSV801 DME ISN

ACDP will show instructions and connection diagrams

Module 3 vs Module 27

With module 3, you cannot clone MSV80 etc, only replace it.

With module 27, you are able to clone MSV80 etc.

One of Yanhua ACDP users was trying to read BMW MSV80 DME ISN with module 3 and interface board but failed. ACDP Mini says the device does not obtain authorization of A51E module.

Here is the solution:

If read by OBD/CAN mode (module 3), ACDP will not ask for A51E license. 

If you select bench mode to read/write MSV80 ISN, A51E license is required.

A51E license is for ACDP Mini module 27.  Module 7 uses special interface boards to read ISN on bench mode.