Me i tested on Renault CLiP ok, Toyota Techstream ok
byMr.Tobias Johanssonon Feb 20, 2024
My GODIAG GD101 works like a charm, with latest ODIS E (14) and ODIS S (23) !
I updated some modules without any problem .
Even ECU (MED9.1) it takes 7 minutes !
I do mistake whith ABS software (3C0614109A) and I recovered it.
Godiag provide firmware updates (Software 1.20, firmware 1.10) and softwares (with activators).
byMr.Fabio Virnoon Jan 17, 2024
it works for me on Renault CAN-CLiP versions +v214 ( intended for passthru j2534 )
byMr.Cojocaruon Dec 26, 2023
schnelle Lieferung, top
byMr.Jeremiah Gilpinon Nov 23, 2023
I have been using GODIAG for ODIS and works just fine it is a J2534 which is required by ODIS... it just do the job for ODIS
byMr.Steve Wilsonon Nov 14, 2023
Tested by me on ODIS S 11 and also works with xentry xpt like Openport 2.0
byMr.Gary Bennefieldon Nov 14, 2023
Techstream works perfect, ODIS works (need to use the correct version), Xentry personally not tested yet.
byMr.singhon Oct 6, 2023
Hi, item received
byMr.Tim Davidon Sep 27, 2023
With firmware version V1.9 my car connects very well!!! Thank you!
byMr.Sean Coelhoon Sep 27, 2023
So I just bought one of these. I had to find the drivers on a site listing a black version named GoDiag. Forscan found it as a device. I'll test tomorrow and report. No 60 day license required like my vcx nano.
byMr.Kurt Burtonon Aug 23, 2023
I have successfully tested GoDiag GD101 J2534 / ELM 327 / J1979, with FiatECUScan, MultiECUScan and AlfaOBD, Its shows up as USB Serial Device (COMx) in Device Manager and The softwares detect the interface as compatible with ELM 327 1.4!
other software this interface is tested with : ScanMaster, Mercedes, BMW, VW-Group, Nissan, Honda, GM as J2534 passthru interface.
It is a faster and secure alternative to OpenPort 2.0 and cheap $23 including shipping from obdii365.
byMr.Eder Laraon Aug 22, 2023
I was looking for a J2534 compatible cable to use with Toyota's Techstream diagnostic a programming software for my 05 Toyota Matrix. This cable worked flawlessly and at less than half the cost of the other available options.
To get a valid key for your Techstream open up the J1979 Diagnostic software, at the top you'll see a button for "PIN", click that and make sure you have the TIS keygen tab selected. Next, make sure version 17 and region "other" are both selected, open up your Techstream (you'll need to make sure you select other as your region on your first startup) enter the asked for info, and when it gets to the popup asking for a key you'll want to copy your Software ID and enter that into the corresponding field back in the J1979 software. It will give you a key, enter that in TIS and bingo bango your software is valid for the next 3000 days.
I've used the software to program a key, as well as chase down/diag a trans issue. If you own a Toyota this software/cable combo are invaluable.
byMr.Hassni Barezzakon Aug 22, 2023
Works for what I got it for and that was to use with HDS. downloading the nano driver in order for the Godiag to work with HDS. It did work with HDS and helped troubleshoot and fix a DTC.
byMr.Jhon Cekalon Aug 16, 2023
Works with Odis I have tried it, Jlr sdd, Gm2 and Honda do see it but I have not tested on car yet.
byMr.Simon Britstoneon Mar 24, 2023
Works with Odis I have tried it, Jlr sdd, Gm2 and Honda do see it but I have not tested on car yet.
byMr.Vicente Lourion Feb 7, 2023
I ran Toyota's Techstream with this dongle and it worked just fine. Just be careful when downloading files from godiag's website as I detected malware. For example when I downloaded Techstream archive, there was a drivers folder containing malware. Ignore that drivers folder as the only driver you need is Godiag J2534 Nano Device Driver from godiag.com tech support page. Just be cautious, have your virus scanner on and you'll be golden.
byMr.Brian Goodsonon Feb 7, 2023
This cable is exactly what I needed to connect my usb vag com obd-II interface to my Lincoln's connector. all is right and good in the diagnostic world now. Well worth the money for the hardware. Durable and small enough to wrap up and put in the glovebox or tool case.
byMr.Nader Korton Feb 7, 2023
The USB cable is a good length and works like a charm one. The key for me was to plug it in to my car first then hook up to the laptop and then it downloaded and extracted the zip file and worked flawlessly. I was able to read the abs code my crown Vic had for a faulty abs module. Also please be sure to save a file of your OEM settings before making any changes or you’ll regret it if you make a mistake.
byMr.Pop Flaviuson Jan 13, 2023
I tinker with working on cars and was looking for something better than the cheap wireless models you can find all over the place. But I didn't want to spend hundreds to get a professional tool. This fits the bill. Included in the packaging is a link to download the application they recommend using with this tool. There are others as well if you search. This works great for a basic reader and can clear codes. It also allows a few more features than a standard scanner, with the right software. I wanted something that I could read with my old eyes. This connects to a laptopto use the tool. I have several older laptops that I use specifically for my auto repairs in my workshop. I have a rolling cart to keep the laptop on and I can just roll it out to the car, then use this to connect and sit down to review everything on a bigger screen. So far I have used it with a Windows 10 x64 system and it works good. I am not sure about other operating systems.
byMr.Andrejs Ivanovson Jan 13, 2023
have used several Bluetooth and wireless ODB II connectors in the past. They work well but you have to worry about the connection dropping. Using this practically eliminates that issue.
I only had to use the drivers from the website to get this up and running on my laptop. I use other 3rd party software to interface and it worked flawlessly for me.
For the average DIYer, this is everything you should need to get any codes so you can diagnose your vehicle problems. Also, you are able to clear any stored trouble codes. Another thing you can do is, is the proper software, view live data being streamed from your car.