Diatronik Support all renesas and Infineon airbag restore by OBD2 up to 2019
Diatronik Support Dash mileage correction via OBD2
Diatronik Support Airbag Calculator via USB
Diatronik have many more function like OBDII Diag, IMMO Tool, G-Prog in develop, will add later.
This innovative NT630 Elite ABS and Airbag Reset Tool with SAS Funcyion does not only have extensive coverage of vehicles but also provides accurate and professional diagnosis of ABS and airbag faults. This new NT630 scanner is just the perfect tool that professional mechanics can’t wait to have.
Oil Reset Tool X-200 is a professional hand auto maintenance resetter, including CBS and OIL resetting, tire pressure alarm lamp resetting (by hand), timing belt CBS reset(by hand), obd-Ⅱ engine diagnosis, brake pad changing of EPB Electronic Brake and other functions for resetting.
X200 supports the newest cars with CAN BUS and UDS agreements.
CG100-airbag tool exclusively designed to read Tricore MCU’s over CAN-bus.Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766 SAC-TC1767 SAC-TC1796 SAC-TC1797 microcontrollers.comes with Mileage, DPF, ECU system time, ISN built-in calculators.Edit CRC Eeprom.
The Oil/Service and Airbag Reset Tool is specially designed to reset oil service light, oil inspection light, service mileage, service intervals and airbag on most major Asian, American and European vehicles without using the OEM scan tool. Save money on expensive garage charges with this ergonomic reset tool!
CG100-airbag tool exclusively designed to read Tricore MCU’s over CAN-bus.
Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766 SAC-TC1767 SAC-TC1796 SAC-TC1797 microcontrollers.comes with Mileage, DPF, ECU system time, ISN built-in calculators. Edit CRC Eeprom.
Original OBDSTAR X-200 X200 Pro A+B Configuration for Oil Reset + OBD Software + EPB
With X200 Pro, no worries about oil light Resetting!
X200 Pro Reset Tool is a professional handheld device for Oil Resetting.
Toyota vehicles prior to 2009 are equipped with a Tire Pressure Warming Reset that can be used for initialization. When the bottom is pushed and held for more than 3 seconds, the vehicles receivers are open and looking for the currently stored TPMS IDS.
What if there is a missing or broken sensor?
What if there are new sensors on the vehicle that haven’t yet been programmed?
This will cause these vehicles to become stuck in a loop, searching for TPMS IDS that are no longer there.
N2 USA has developed the Toyota Loop Reset tool to hands this issue.
VXSCAN OEM 2006-2016 Ford TPMS Training Tool Activation tool (8C2Z 1A203-A) is used by Ford to train the TPMS sensors on new vehicles or after a tire rotation. Use this tool to train OEM sensors so the TPMS warning light is not illuminated.
Including all function XC236x FLASH Programmer and Renesas Repair function.
Full support for CPU airbag computer repair.
Software adopts to operate interface with wizard-style, data arbitrarily rewrite, MCU pin identification and detection.
SI-Reset V-A-G OBD2 Workable with VW, AUDI, FORD, Seat & Skoda Cars with OBD2 connector (w/o can bus). Reset Inspection Intervall.
We supply SI-Reset V-A-G with unlimited technical support.
Functions:Reset Inspection Intervall. Workable Model:Opel Astra built after 1998, Zafira built after 1998, Corsa build...
QUICKLYNKS EP31 diagnostic device reads and clears trouble codes. This device enables users to change brake fluid/bleeds brake system and has basic setting of rear brake calipers capabilities. Consumers can change brake disc and pads with ease. This is only on special vehicles and models such as Audi, Mercedes, Volkswagen, Volvo.
PS150 OIL RESET TOOL is specially designed to reset oil service light, oil inspection light, service mileage, service intervals and airbag on most major Asian, American and European vehicles
Reset Inspection and Oil Service work for BMW Mini & Rover 75 cars build after 2001 through OBD2,easy to practice.
EPB Service Tool work with confidence on newer VW, Audi, vehicles with integrated electronic brake systems. Use the tool with the OEM procedures built in!
The AutoEnginuity Service Reset Tool will allow you to perform the BMW Ser-vice Inspection Rest (SIR) and Conditional Based Service (CBS) Oil Service reset and will also allow you to perform the battery replacement registration as required for late-model BMW battery replacement.
Gprog Lite SL Adapter, Works together with Diatronik, used to read renesas and infineon on circuit. Free Shipping with best price.
CAN Adapter work with CG100 PROG III , Repair ECU, Read and Write ISN , support MT80 ,MT60,B-M-W,A-UDI.VW. It CANNOT Work Alone.