I find it excellent for reading CAS3+ modules. I've bought the ISN adapters, but not needed the MEV17.2 ones, yet.

Can this device also clone FRM/BDC module's of F-series?
Kind regards

cas 3 & 4 keys - no problem
FEM key - no problem
FRM3 reprogram - no problem
did clone 2 F series ECu - no problem

I use acdp to add key CAS3, CAS4 FEM, all ok

acdp good for keys for sure CAS3,4, didn't try on FEM but people say it does the job. 
FRM3 repair works great
ECU cloning F series works good 
EGS 8hp isn clear works 

overall happy with the tool. 

Get the Yanhua Mini ACDP with cas module.
I have both VVDI2 and Yanhua.
Using only yanhua via eeprom (doesn’t require soldering, just adapter for all CAS1-CAS4).
BEST TOOL ON MARKET 100%. Not a single fault after 100+ keys.

Doing via eeprom way faster than VVDI with downgrade. I do e60 in 7 min and e90 in 10 minutes, together with cutting the key. CAS4 also 10min. 
Tools also supports bench ISN reading from mevd/edc17 and mg/md1 ECU. So AKL on CAS3+ and CAS4+ takes about 15-20minutes, together with opening and decoding the lock, cutting, ISN reading and programming. Gamechanger, before I bought the tool I spent 40 min to carefully solder, read, write bla bla bla.
Also easiest And best solution For FEM. don’t need to reconnect to the car and run there and back. Just connect tool to FEM, wait for 5-10min and preprocess+key is ready. Done about 20 fem/bdc keys With 100% success rate.
Only one rule for 100% success rate with BMW - even if it is advertised it goes OBD, never do it. Only eeprom and you will sleep well. VVDI Prog if you ok with 30-40min and 80% success rate for CAS4, Yanhua if you make lot of BMW and need quick job and 100% success with all cars.
Also, as a bonus in the future you can buy the Volvo module and be able to make Volvo keyless KVM programming without ori abrites or VIDA online. Tested couple of weeks ago for the first time on Volvo XC70 or XC60 (don’t remember) keyless 868. Readed KVM pass via adapter, CEM pass via adapter and programmed key via OBD first try. Total job took 50min with erth.
The only tool which so far has 100% success rate FOR ME. VVDI2 I use only for VAG and even there it has limitations.

CAS no issues always take out module
It’s safe tool , no solder , it is very good tool. 

I used mine for many keys cas3/cas3++ and 4 easy. always done mine via icp I always take out the cas.

Merhaba Joyce bu cihazin baska dilleri varmi sadece ingilizcemi var Tesekür ederim

New toy just arrived. Waiting for the modules and will embark to self-learning again. Thank you.

---

Making Key in All Keys Lost situation for 2013 Mini CAS3+ success.
Usually on CAS3+ or ++, the ACDP reads the data, then decrypts it on there server, then writes data to the key to make it a dealer key... Then you introduce the key to the CAS and it accepts it..

ACDP is a great device! All who have it are praised.

I want to know if I can do the key if the original key is lost,With acdp full version, Online or offline ?

I solved all issues with mini acdp, with help from factory ,thank you

Have made 3 different 3 series keys CAS3/3+.
also CAS4/4+ no issues

Just did CAS4 KR55WK49663 key yesterday worked like a charm, I need to test it on fem and bdc but CAS never had any issues. I also use it from iPhone

Good for its price.
i used it.
did 2 bmw x1 with it
x1 2019 fem key
also read 1 isn in ecu

Few days ago I got mine one. And just did lost key on BMW 1 F20 +++2015+++ I was a bit worred but all want PERFECT..

E90 Cas3++(ISTAP) all key lost done by ACDP!👍🏻💯

ACDP was well received ,thank you

---