Xhorse V5.8.0 VVDI 2 VVDI2 Commander Key Programmer Full Version 5 in 1 Programmer With PSA Function

V5.8.0 VVDI2 VVDI 2 Commander Key Programmer Full Version With PSA Function

TOP 6 Reasons to get VVDI2 VVDI 2 Commander Key Programmer:

1.Comes with all VVDI functions, which is improved to be more stable

2.More vehicle supported, multi Immo functions

3.New added plug-in function and reserved connectors to include all VVDI functions

4.Newest Version: V5.8.0

5. 5 in 1 PROGRAMMER. No Need to buy other Authorization
VVDI 2=VVDI PROGRAMMER SV30 + BMW MULTI TOOL SK97+ BMW CAS PLUS SK108+ CAS 4 BMW SK97-B + 5th IMMO FOR VVDI SO146 

6. Software is frequently updated. You can directly download the latest update tool on official website to update your VVDI 2.

Operating system: Windows XP and Windows 7

Good news! FEM and BDC function is available to VVDI2 Series

Promotion: 
For those customers who have BMW OBD function , if you need FEM and BDC function , you can pay for it.
1.If you own a condor machine and  VVDI2 with BMW OBD function,  you need to pay 600USD for FEM/BDC Authorization.
1.If you don't have a condor machine,but you have  VVDI2 with BMW OBD function,  you need to pay 800USD for FEM/BDC Authorization.
 

Operating system: Windows XP and Windows 7

Good news! FEM and BDC function is available to VVDI2 Series

Promotion: 
For those customers who have BMW OBD function , if you need FEM and BDC function , you can pay for it.
1.If you own a condor machine and  VVDI2 with BMW OBD function,  you need to pay 600USD for FEM/BDC Authorization.
1.If you don't have a condor machine,but you have  VVDI2 with BMW OBD function,  you need to pay 800USD for FEM/BDC Authorization.
 

Free Download VVDI2 V5.6.0 software
https://mega.nz/#!AdkkDKqI!zcmGvRlgz6tcBLzRnlY91Pl8KJdfKW8wCL-zVuHaC-E

VVDI2 software version V5.8.0 update

*** 2018-09-04

*** Require firmware V5.8.0
************************************************** **********************
===== VAG V5.8.0 =====
1. Bugfix for read PIN/CS from old touareg ECU, manually select type is: MED9.1 single
2. Bugfix for read PIN/CS from old Bentley ECU, manually select type is ME7 slaver
3. Immoprovement for autodetect VAG immobilizer system
4. Flash VAG firmware(frf, odx, sgo): support flash VAG firmware bigger than 300M, support flash virtual cockpit cluster
5. Bugfix

===== BMW V5.8.0 =====
1. FEM/BDC system add reset ECU lock(Usually used after exchange FEM/BDC)
2. Improvement for FEM/BDC key learning
3. Support read E-Series ECU synchronize code via OBDII: MEV9N46, MEV9N46L, N62_TUE, N62_TUE2, MS450DS0, MSS60, MSV70 etc
4. Bugfix

===== Porsche V5.8.0 =====
1. Bugfix

===== PSA V5.8.0 =====
1. Bugfix

===== Transponder Programmer V5.8.0 =====
1. Improvement for Rover/Jaguar(2015-) MC9S12EXT256/MC9S12EXQ384
2. Bugfix for new wireless remote
3. Immobilizer data tool: Bugfix for Euro->Peugeot->C1 24C04
4. Immobilizer data tool: Add support for Aisa->China Immobilizer box: JIAOTONG/LIANCHUANG/DELPHI/TONGZHI
5. Bugfix

===== Copy 48 (96 bits) V5.8.0 =====
1. Bugfix

===== J2534 V5.8.0 =====
1. Bugfix

===== Online Upate Tool V5.8.0 =====
1. Bugfix

===== Quick Start V5.8.0 =====
1. Bugfix

VVDI2 software version V5.6.0 update

*** 2018-06-20
*** Requires firmware V5.5.0


===== VW V5.6.0 =====
1. Improve the automatic diagnosis of the public security system
2. Refresh the original firmware (frf, odx, sgo): Supports fast, medium, and slow 3 refresh modes
3. Other bug fixes

===== BMW V5.6.0 =====
1. Repair BMW FEM/BDC backup and recovery code, support to version ISTAP64.2
2. Other bug fixes

===== Porsche V5.6.0 =====
1. Other bug fixes

===== Peugeot Citroen V5.6.0 =====
1. Other bug fixes

===== Key Programmer V5.6.0 =====
1. Fix remote copy instability
2. Fix the issue of smart card generation
3. Add write startup: Europe -> Land Rover -> New Land Rover/Jaguar (2015-) MC9S12EXT256/MC9S12EXQ384
a. Need to load KVM/RFA DFLASH and EEPROM data
b. Support emergency start function, need to write back BCM DFLASH data
c. After the key is generated, write new data back to the KVM/RFA module. The new key is started directly. The remote control is intelligent and effective. No additional matching is required.
d. support to erase the lost key
4. Other bug fixes

===== 96-bit 48-copy V5.6.0 =====
1. Other bug fixes

===== J2534 V5.6.0 =====
1. Other bug fixes

===== Online Upgrade V5.6.0 =====
1. Other bug fixes

===== Quick Start V5.6.0 =====
1. Other bug fixes

VVDI2 software version V5.5.0 update
 

*** 2018-05-15
*** Require firmware V5.5.0
************************************************* *********************
===== VAG V5.5.0 =====
1. Add support for 2012-2014 MQB(Continental/VDO) immobilizer and mileage. Support following cars:
a. VW Golf7 (2012-2014)
b. Skoda Octavia3 (2012-2014)
c. Audi A3 (2012-2014)
d. Seat Leon (2012-2014)
2. Bugfix for old bentely (2006 kline) key learning
3. Bugfix for flash VAG firmware(frf, odx, sgo)
4. Bugfix

===== BMW V5.5.0 =====
1. Add support for ISTAP63/64 FEM/BDC, support following version:
a. FEM 0000155E_016_114_020
b. FEM 0000155E_017_110_030
c. BDC 00002419_062_010_020
d. BDC 00002419_071_010_040
2. Bugfix for CAS4 file make key
3. Bugfix

===== Porsche V5.5.0 =====
1. Bugfix

===== PSA V5.5.0 =====
1. Bugfix

===== Transponder Programmer V5.5.0 =====
1. Add support for make proximity remotes – Prepare various proximity remotes with VVDI universal proximity remote(Require database version above 238)
2. Immobilizer data tool: bugfix for Euro->Fiat->Grand Punto 93C86
3. Immobilizer data tool: bugfix for Asia->Hyundai->Tiburon 2008 29F400
4. Immobilizer data tool: bugfix for Euro->Saab->9-3 1999 68HC05
5. Bugfix

===== Copy 48 (96 bits) V5.5.0 =====
1. Bugfix

===== J2534 V5.5.0 =====
1. Bugfix

===== Online Upate Tool V5.5.0 =====
1. Bugfix

===== Quick Start V5.5.0 =====
1. Bugfix
 

VVDI2 software version V5.3.0 update

*** 2018-03-22 
*** Require firmware V5.2.5 
************************************************ ********************
===== VAG V5.3.0 =====
1. Improvement for prepare MQB dealer key
2. Improvement for MQB keyless GO key learning
3. Improvement for BCM2 dump tool
4. Support write immodata for Audi RB8 type
5. Bgufix for customer request in diagnostic unit
6. Bugfix for MED17/EDC17 online decode PIN/CS
7. Bugfix

===== BMW V5.3.0 =====
1. Improvement for FEM/BDC key learn
1. Bugfix

===== Porsche V5.3.0 =====
1. Support porsche 911,997, boxster 987 keylearn: Menu->Key Learn->Transponder Key - 911,987, Boxster 987, Cayman
2. Bugfix

===== PSA V5.3.0 =====
1. Bugfix

===== Transponder Programmer V5.3.0 =====
1. Immobilizer data tool: bugfix for Asia->Suzuki->SX4->2006 93C56
2. Immobilizer data tool: bugfix for America->Jeep->Laredo->2008 uPD70F
3. Immobilizer data tool: bugfix for Euro->Fiat->Grand Punto->93C86
4. Bugfix

===== Copy 48 (96 bits) V5.3.0 =====
1. Bugfix

===== J2534 V5.3.0 =====
1. Bugfix

===== Online Upate Tool V5.3.0 =====
1. Bugfix

===== Quick Start V5.3.0 =====
1. Bugfix
 

VVDI2 software version V5.2.5 update

*** 2018-02-02
*** Require firmware V5.2.5
************************************************** **********************
===== VAG V5.2.5 =====
1. Bugfix for prepare dealer in MQB platform
2. Bugfix

===== BMW V5.2.5 =====
1. Bugfix

===== Porsche V5.2.5 =====
1. Bugfix

===== PSA V5.2.5 =====
1. Bugfix

===== Transponder Programmer V5.2.5 =====
1. Support prepare remote via online
2. Immobilizer data tool: bugfix for Asia->Hyundai->Getz->2007-(95040,95160)
3. Immobilizer data tool: bugfix for Euro->MAN->TGA->25128(25256)
4. Bugfix

===== Copy 48 (96 bits) V5.2.5 =====
1. Release a new licence for copy 48(96 bits). This tool can run only with copy 48(96 bits) license.

===== J2534 V5.2.5 =====
1. Bugfix

===== Online Upate Tool V5.2.5 =====
1. Bugfix

===== Quick Start V5.2.5 =====
1. Bugfix

VVDI2 software version V5.2.1 update
*** 2018-01-23
*** Require firmware V5.2.0
************************************************* *********************
===== VAG V5.2.1 =====
1. Bugfix for access some MQB(Continental/VDO) instrument
2. Improvement for prepare MQB dealer key: Now we support all original blank key or MQB key made by VVDI
3. Improvement for MQB key learning
4. Improvement for autodetct in IMMO4 system
5. Bugfix for Spanish language
6. Bugfix===== BMW V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Porsche V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== PSA V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Transponder Programmer V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== J2534 V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Online Upate Tool V5.2.1 =====
1. Bugfix for spanish language
2. Bugfix

===== Quick Start V5.2.1 =====
1. Bugfix
 

VVDI2 software version V5.2.0 update

************************************************* *********************
*** 2018-01-19 
*** Require firmware V5.2.0 
************************************************* *********************
===== VAG V5.2.0 =====
1. Improvement MQB NEC35xx immobilizer/KM function, support following cars:
Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+

Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not include
Attention 2: Improvement for prepare dealer key: support original blank key and MQB key made by VVDI
Attention 3: MQB Immobilizer function require extra license. Customer who have copy 48 (96 bit) license will get MQB license for free
Attention 4: Improvement for key learn function
Attention 5: Bugfix for access some MQB instrument
2. Improvement for autodetct in IMMO4 system
3. Add spanish language
4. Bugfix

===== BMW V5.2.0 =====
1. Improvement for read ISN from MSx8x ECU, require VVDI2 database file verison V1.0.0
2. Improvement for load MEV17xx EEPROM dump
3. Support change second hand FEM/BDC ISN and make original key working
4. Add spanish language
5. Bugfix

===== Porsche V5.2.0 =====
1. Add spanish language
2. Bugfix

===== PSA V5.2.0 =====
1. Add spanish language
2. Bugfix

===== Transponder Programmer V5.2.0 =====
1. Bugfix for update remote database
2. Bugfix for save points
3. Immobilizer data tool: bugfix for Fiat Ducato 93C56
4. Add spanish language
5. Bugfix

===== J2534 V5.2.0 =====
1. Add spanish language
2. Bugfix

===== Online Upate Tool V5.2.0 =====
1. Add spanish language
2. Bugfix

===== Quick Start V5.2.0 =====
1. Bugfix

VVDI2 latest software version V5.1.0 update

*** 2018-01-18
*** Require firmware V5.1.0
************************************************* *********************
===== VAG V5.1.0 =====
1. Improvement MQB NEC35xx immoblizer/KM function, support following cars:
Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not includ
Attention 2: MQB Immobilizer function support original blank key and MQB key made by VVDI2
Attention 3: part of original blank key not support write data
Attention 4: MQB Immobilizer function require extra license. Customer who have copy 48 (96 bit) license will get MQB license for free
2. Improvement for autodetct in IMMO4 system
3. Add Spanish language
4. Bugfix

===== BMW V5.1.0 =====
1. Improvement for read ISN from MSx8x ECU, require VVDI2 database file verison V1.0.0
2. Improvement for load MEV17xx EEPROM dump
3. Support change second hand FEM/BDC ISN and make original key working
4. Add spanish language
5. Bugfix

===== Porsche V5.1.0 =====
1. Add spanish language
2. Bugfix

===== PSA V5.1.0 =====
1. Add spanish language
2. Bugfix

===== Transponder Programmer V5.1.0 =====
1. Bugfix for update remote database
2. Bugfix for save points
3. Immobilizer data tool: bugfix for Fiat Ducato 93C56
4. Add spanish language
5. Bugfix

===== J2534 V5.1.0 =====
1. Add spanish language
2. Bugfix

===== Online Upate Tool V5.1.0 =====
1. Add spanish language
2. Bugfix

===== Quick Start V5.1.0 =====
1. Bugfix


Free download XHorse vvdi2 v5.1.0 software
https://mega.nz/#!PoJBSBKD!nn1ai-JfcoqAM4hbnitabziaSWY-5vkz-1erx4gj7VY

VVDI2 software version V5.0.1 update

 2018-01-06 *** 
Require firmware V5.0.0 
!!! Update V5.0.0 firmware require use "Upgrade Kit", you can find it from VVDI2 Quick Start from V5.0.0 software !!!
===== VAG V5.0.0 =====
1. Add support for MQB NEC35xx immoblizer/KM function, support following cars:
Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+
Attention 1: This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not includAttention 
2: MQB Immobilizer function require MQB key made by VVDI2.
2 Bugfix
===== BMW V5.0.0 =====
1. Improvement for read ECU ISN
2. Bugfix
===== Porsche V5.0.0 =====
1. Bugfix
===== PSA V5.0.0 =====
1. Bugfix
===== Transponder Programmer V5.0.0 =====
1. Bugfix
===== J2534 V5.0.0 =====
1. Bugfix
===== Online Upate Tool V5.0.0 =====
1. Bugfix
===== Quick Start V5.0.0=====
1. Add "Upgrade Kit"
2. Bugfix


VVDI2 software version V4.9.0 update
*** 2017-12-28
*** Require firmware V4.8.0
************************************************* *********************
!!!This update no need update firmware===== BMW V4.9.0 =====
1. FEM/BDC support emergency switch ON: FEM/BDC Key Learn->Emergency switch ON
2. Support read ISN from original key(even key was disabled): FEM/BDC Key Learn->Read ISN from original key
3. FEM/BDC support close/open transport mode: FEM/BDC Key Learn->Exchange FEM/BDC->Close/Open transport mode
4. !!!New Function: ECU/CAS ISN!!! (Menu->Key Learn->ECU/CAS ISN)
Support OBD exchange used or new ECU module, no need open PCB
Support OBD exchange used CAS3+/ISTAP module, no need open PCB
Support exchange used or new ECU module with “ECU dump file”
Support exchange used CAS3+/ISTAP, CAS4(1L15Y, 5M48H) with “CAS dump file”
(1). E-Series
(a). OBD read ECU ISN: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(b). OBD read/write ECU ISN: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(c). OBD read/write ECU ISN: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(d). OBD Read/write CAS ISN: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(e). Support write new ISN to ECU flash dump file, fix checksum: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(f). Support write new ISN to ECU eeprom dump file, fix checksum: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(g). Support write new ISN to ECU eeprom dump file, fix checksum: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(h). Support write new ISN to CAS3 eeprom dump file, fix checksum: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(2). F-Series(some F-series ECU don’t support read ISN from OBDII)
(a). OBD read/write ECU ISN: MEVD1724 (N20 Tricore), MEVD1725 (N13 Tricore), MEVD172Y(N55 Tricore), X63TU(S63TU, N63TU)
(b). Support write new ISN to CAS4(1L15Y) eeprom dump file, fix checksum: CAS4(1L15Y)
(c). Support write new ISN to CAS4(5M48H) eeprom dump file, fix checksum: CAS4(5M48H). Encrypt verison require working key support
(3). Some function in ECU/CAS ISN require download VVDI2 configuration file: Online Update Tool(v4.9.0)->Menu->Software Update and Update Information->Configuration file Update
5. Support read CAS3+(ISTAP) EEPROM from OBDII(This is not full EEPROM, Support make dealer key, DON’T WRITE this file back to CAS)
6. Bugfix
===== Transponder Programmer V4.9.0 =====
1. Support identify MQB(VAG) key
2. Immobilizer data tool: add new for BMW->Motorcycle
3. Immobilizer data tool: bugfix for Subaru->Impreza 1996 68HC05
4. Bugfix for write HITAG EEPROM
5. Bugfix
===== Online Upate Tool V4.9.0 =====
1. Add menu for VVDI2 configuration file: Menu->Software Update and Update Information->Configuration file Update
2. Bugfix


VVDI2 software version V4.8.0 update

*** Require firmware V4.8.0
************************************************* *********************
===== VAG V4.8.0 =====
1. Improvement for copy 48 (96 bit). All the custer update to latest V4.8.0 for copy function
2. Improvement for OBD 48 copy. Fixbug for Passat/CC copy funtion, add support copy CDC32xx type in OBD 48 copy
3. Bugfix for some Q3 dashboard in IMMO4 system
4. Improvement for autodetct in IMMO4 system
5. Bugfix===== BMW V4.8.0 =====
1. Support display FEM/BDC system frequency
2. Support exchange FEM/BDC function, you can exchange second hand FEM/BDC module
3. FEM/BDC system now support 16 key positions
4. Bugfix===== Porsche V4.8.0 =====
1. Bugfix

===== PSA V4.8.0 =====
1. Bugfix

===== Transponder Programmer V4.8.0 =====
1. Support the latest remotes version produced after 11.2017
2. HITAG(VAG)(VW/Audi IMMO5 key) type, support write EEPROM file while keys is not locked
3. Immobilizer data tool: bugfix for Renault Duster 2010 95040
4. Add garage door remotes: Menu->Transonder-Chip-Remote->Garage Door
5. Bugfix

===== J2534 V4.8.0 =====
1. Bugfix

===== Online Upate Tool V4.8.0 =====
1. Bugfix

===== Quick Start V4.8.0 =====
1. Bugfix

VVDI2 software version V4.7.8 update

*** 2017-10-30
*** Require firmware V4.7.8
************************************************* *********************
===== VAG V4.7.8 =====
1. Improvement for copy 48 (96 bit), reduce the server calculation time. All the cluster update to latest V4.7.8 for copy function
2. Bugfix

===== BMW V4.7.8 =====
1. Bugfix

===== Porsche V4.7.8 =====
1. Bugfix

===== PSA V4.7.8 =====
1. Bugfix

===== Transponder Programmer V4.7.8 =====
1. Bugfix

===== J2534 V4.7.8 =====
1. Bugfix

===== Online Upate Tool V4.7.8 =====
1. Bugfix

===== Quick Start V4.7.8 =====
1. Bugfix
 

VVDI2 software version V4.7.5 update

************************************************ ********************
*** 2017-10-16 
*** Require firmware V4.7.5 
************************************************ ********************
===== VAG V4.7.5 =====
1. Support copy 48 transponder(96 bit, All car with ID48 transponder), (Menu->Key Learn->Copy 48 transponder(96 bit, All car with ID48 transponder))
About copy 48 function on VVDI2:
(1). Authorize copy 48 function(96 bit) require buy license and a extra 48 emulator
(2). Every success calculate will cost 100 remote points
(3). Copy 48 function now support all the cars with ID48 transponder: VW, Audi, Skoda, Volvo, Honda, Buick, Cadillac, Fiat, GreatWall, Zhonghua etc
(4). Copy 48 function no need OBDII connect
2. Bugfix

===== BMW V4.7.5 =====
1. Bugfix

===== Porsche V4.7.5 =====
1. Bugfix

===== PSA V4.7.5 =====
1. Bugfix

===== Transponder Programmer V4.7.5 =====
1. Bugfix

===== J2534 V4.7.5 =====
1. Bugfix

===== Online Upate Tool V4.7.5 =====
1. Fix some update problem
2. Bugfix

===== Quick Start V4.7.5 =====
1. Bugfix
Notes:because xhorse still building new server and running with high cost on electrical power,the copy48(96bits) is optional function,
currently remote points only for Chinese users, after server all ok the online calculation speed should be 3-5 minutes, calculation time also can buy.

VVDI2 latest software version V4.7.0 update

*** Require firmware V4.7.0 
************************************************ ********************
===== VAG V4.7.0 =====
1. Improvement for new NEC+24C64 dashboard after 2014.06, support new VDO dashboard. Now we support following cars:
VW T5 2014.06-2016
VW T6 2015.06-2017
VW Sharan 2014.06-
VW Passat 2014.06-2016
VW Caddy 2014.06-2017
VW Jetta 2014.06-2016
VW Scirocco 2014.06-
VW Tiguan 2014.06-
VW Touran 2014.06-
VW EOS 2014.06-
VW CC 2014.06-2016
VW Golf 2014.06-
VW Amarok 2014.06-
Skoda Yeti 2014.06- 
Seat Alhambra 2014.06-
Audi A1 2014.06-
Audi Q3 2014.06-
2. Bugfix

===== BMW V4.7.0 =====
1. Bugfix

===== Porsche V4.7.0 =====
1. Bugfix

===== PSA V4.7.0 =====
1. Bugfix

===== Transponder Programmer V4.7.0 =====
1. Bugfix

===== J2534 V4.7.0 =====
1. Bugfix

===== Online Upate Tool V4.7.0 =====
1. Bugfix

===== Quick Start V4.7.0 =====
1. Bugfix
​​​​

Differences among VVDI2 series

	SV86(Full Version)	SV86-B(Basi)	SV86-C(Basic)
Price	2369USD	1550USD	499USD
Basic Function	√	√	√
VW	√	√	×
BMW	√	×	×
Porsche	√	×	×
5th AUDI Authorization	√	√	+320USD (SV86-2)
BMW OBD Authorization	√	+720USD (SV86-3)	+720USD (SV86-3)
BMW CAS4 + Authorization	√	+260USD (SV86-4)	+260USD (SV86-4)

 

Update VVDI to VVDI 2:

Add more car models:

VVDI supports diagnostic function only for VAG groups, but VVDI2 has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI2 can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.

Plug-in function, reserved connectors

VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Allow you to connect BMW plug to realize OBD function, and meanwhile reserve some connectors for further uses.

The core function is to detect the remote control frequency

Automatically identify chip type
Support multi-function on VW vehicles
Read BMW ISN
Key programmer
Remote control programmer

J2534 compatible adapter

1. Detect key frequency, automatically identify chip type

The test result can show on the main unit display, no need to connect computer

2. Supports VAG vehicle diagnostic function

Read & write Immo4/Immo5 system
key Learning
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools

3. Supports OBD functions on BMW vehicles.
 
Correct odometer
Generate key
Unlock key
Fix CAS computer

4. Key programmer

Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control

5. Passthru J2534 Introduction

With built-in switch matrix, it supports third-party diagnostic software including: ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.

Why VVDI 2 is better?

VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool.

There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.

Apart from free update online service and system optimization, more powerful functions and vehicle models (Like Porsche) will soon be available via update. And other more functions, you name it…

VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device

Note:

This "Prepare Remote" function is under developing,still can't be supported now. when released,we will inform here.

Q: I do have BMW X5 from 2013+ , it's F15 with CAS4+ I guess and 5M48H, it has all keys lost. What equipment I should buy from you to make a new key.
A: 1) For 5M48H, you need to use XPROG or VVDI pro to read the date
     2) Use BMW MULTI TOOL or VVDI 2 do CAS4+, and use the data you read out to generate the key data to match programming and simultaneous car 
For second steps. If you choose BMW MULTI TOOL, you still need to buy the CAS4 adapter. If you choose VVDI2, then no need to buy others.

Q: I want to open component security function. what should i do?
A: For this function. If you want to use, you need to open pin,mac reading,CS authorization then can use. If you have bought the condor key cutting machine. Then this authorization is free to open. Please give us your name/country/EmailVVDI SN/  VVDI2 SN  / CONDOR SN. If you do not bought CONDOR key cutting machine, then cannot open this authorization.

Q: Hello. I purchased this product and it says at the top... re synchronization in 23 days.. How do you re synchronization the device...Thank you
A: This is normal. Once the day become 1, you just need to connect interent. Then it will be back to 30 days again. This is setted by Xhorse company to avoid others crack their software. 
 
Find us on your phone:

V2018.9 MB SD Connect C4 Star Diagnosis Plus Panasonic CF19 I5 4GB Laptop

If you have any questions, please do not hesitate to contact us, below is our contact information:

Whatsapp: +86 18205947686/86-18259252285
Live Support: Chat with us online
Email: Sales@OBDII365.com
Skype: OBDII365.com