EU UK US SHIP GODIAG GT107 + GT105 DSG Gearbox Data Read/Write Adapter for DQ250, DQ200, VL381, VL300, DQ500, DL500 TCU

Product Description

Godiag GT105 Breakout Box Plus GT107 DSG Gearbox Data Read/Write Adapter

To read DQ250, DQ200, VL381, VL300, DQ500, DL501 gearbox TCU. 

Package includes:

• 1 set Godiag GT105 breakout box
• 1 set Godiag GT107 DSG gearbox adapter

GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter. DSG Gearbox maintenance engineers can clone, diagnose and repair DSG Gearbox ECU and can also read, write and adjust data for DSG Gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.
 
This adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose “Auto”, and for diagnosis you can choose ”Manual”. For other software kessv2, DQ200, DQ250, DQ500 you can also choose “Manual”.
 
Moreover, with the car battery power, the adapter can directly read and write DSG Gearbox data and you can clearly check the communication status during the data reading and writing process.

Function:
Read/write DSG gearbox data with pcmtuner module 58/kess v2/ktm bench etc

Compatible devices:
Kess v2, pcmflash, pcmtuner, CMD, Alientech, Dimsport, Byteshooter, PCMflash, Openport2.0, Scanmatik 2 PRO, KTMOBD2

Module 58
VAG DSG/CVT

DQ200MQB/G2 (0CW)
DQ250MQB (0D9)
Reading, writing, checksum correction

VL381/DL382 (0AW/0CK)
DL501/G2 (0B5)
DQ200 (0AM)
DQ250E/F (02E)
VL300/V30 (01J/0AN)
Writing, checksum correction

DQ200/MQB/G2 Boot (EEPROM)
DQ250E/F/MQB Boot (EEPROM)
DL501/G2 Boot (EEPROM)
VL381 Boot (EEPROM)
DL382 Boot (EEPROM)
Honda UDCT Boot (Continental TC1782/EEPROM)
Reading, writing

DQ200/MQB/G2 Boot (MICRO)
DQ250E/F/MQB Boot (MICRO)
VL381 Boot (MICRO)
DL501/G2 Boot (MICRO)
DQ500 (0BH/0BT)
VL300/V30 BSL (FLASH)
VL300/V30 BSL (EEPROM)
DQ250C (02E)
DL382 Boot (MICRO)
Honda UDCT Boot (Continental TC1782/MICRO)
Reading, writing, checksum correction.

Package includes:

• 1 set Godiag GT105 breakout box
• 1 set Godiag GT107 DSG gearbox adapter

PCMTuner DSG Pinout





PCMTuner, GT105 and GT107 gearbox clone wiring diagram

Easy Operation:
1. Connect Godiag GT107 to the gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501.
2. Connect Godiag ECU IMMO Prog AD and connect 12V 2A DC power supply.
3. The GODIAG GT107 analog ignition switch is in “Auto” mode if it is not pressed, and it is in “Manual” mode if it is pressed down(Note: Please select the corresponding mode in the software for data reading)
4. Connect PCMFlash, PCMTuner J2534passthru.
5. Connect the computer to open the software and select “Auto”.

Used on the Car:

Easy Operation:
1. Connect Godiag GT107 to the gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501.
2. Connect the Godiag ECU IMMO Prog AD and connect the vehicle battery.
3. The Godiag GT107 analog ignition switch is in “Auto” mode if it is not pressed, and it is in “Manual” mode if it is pressed down(Note: Please select the corresponding mode in the software for data reading).
4. Connect PCMFlash, PCMTuner J2534passthru.
5. Connect the computer to open the software and select “Auto”.

Kess V2, GT105 and GT107 gearbox clone wiring diagram

Easy Operation:
1. Connect Godiag GT107 to gearbox ECU DQ250, DQ200, DQ500.
2. Connect Godiag ECU IMMO Prog AD and connect vehicle battery or 12v 3A power supply.
3. Connect kessv2 device, and press down the GT107’s switch to make it in “Manual” ignition mode.
4. Connect the computer to open the software.


GT107 can be used to renew Mercedes 7G Gearbox, BMW 6HP EGS with CGDI/VVDI devices

GT107 Mercedes 7G Gearbox Pinout

GT107 BMW EGS 6HP Pinout


GT107 can also be used to diagnose/renew Benz VGS (722.8), Benz 9GT (VGS-NAG3) gearbox, GM  GPIO 4L60E, Volvo Gearbox, BMW 7-dual-clutch (GETAG 7DCT) gearbox, BMW Temic DKG, ZF 8HP gearbox with proper devices.

GT107 VGS 722.7 (A168) Pinout
 3.- K line
5.- CAN High
6.- VCC 12+
7.- GND -
8.- CAN low

GT107 MERCEDES-BENZ TEMIC VGS (722.8) Pinout

 Pin 1 CAN-L
Pin 2 CAN-H
Pin 3 Mass GND-
Pin 4 12V

GT107 Volvo Gearbox Pinout

GT107 Mercedes-Benz 9GT (VGS-NAG3) gearbox pinout

GT107 BMW 7-dual-clutch (GETAG 7DCT) gearbox Pinout

GT107 BMW Temic DKG Pinout

GT107 ZF8HP Gearbox Pinouts

GM  GPIO 4L60E Pinout


Package Includes:

1pc x Godiag ECU IMMO Prog AD
1pc x DSG Adapter
1pc x Power Cord with Battery Clip 
1pc x Probe

SUGGESTION:


 


We are here for you:

Skype: OBDII365.com
Email: Sales@OBDII365.com