Xhorse VVDIProg Software VVDI PRO Programmer Firmware
Based on built-in software,you can update VVDIProg firmware opportunely
With high-speed USB communication interface,software can be connected automatically .
With Smart operation mode,possible causes of error will be listed
With Self-test function,you can check if VVDI PROG works well or not.
Supplies power is via USB cable, software will automatically prompt if external USB power supply is needed.
V83 Iprog+ Pro car key programmer,it can also support Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCUAtmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC-Cript,ibutton,sd-unlocker,test.Supports vehicles till year 2019.
CG BMW AT-200 supports ECU Data reading, writing and clone, such as, MSV90 MSD85 MSD87 N2055 B38 B48.
Supports IMMO functions and ISN code reading by OBD.
Besides BMW ECU,more than 3000 ECU can also be supported .
Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.
V2.13 KTM100 ECU Programming Tool Master Version with Hardware V7.003,BDM MOTOROLA MPC5xx Protocol is available for KTM100 K-TAG.Operatation is convenient, automatically recognize ECU model, high stability.
KTM FlASH ECU programmer supports V-A-G DQ200 DQ 250 DQ500 VL381 DL501 Transmission, read Chinese car eeprom via OBD, read Infineon via boot mode,supports Chinese car ME17 TC1728/1767 data reading & writing and password reading.
Kess V2 Master V5.017 Online Version Support 140 Protocol No Token Limitation. Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use .
V2.2.1.0 CG Pro 9s12 Programmer Full Version, combination of CGDI BMW and CGDI MB.
Supports ECU IMMO, key Programming via EEPROM data, supports data read/write for BMW mileage correction and immobilizer reset,Mercedes-Benz automatically and make keys to BMW, Land Rover, Porsche.
With free gift: BMW FEM-BDC 95128/95256 Chip IMMO Data Reading 8-PIN Adapter
Ktag K-tag firmware V7.020 EU Online Version master with new 4 LED indicators on Red PCB. Latest software V2.25. No Token Limitation. Supports Multi-Language.
XPROG-M V6.12 ECU Programmer With USB Dongle, No need activation.
with new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9.
CN-200 programmer supports reading and writing ECU data for Mercedes-Benz, BMW, Audi,Porsche, Jaguar Land Rover, Roewe, and MG and correct odometer on Benz, BMW, Volvo, Honda, Hyundai. Kia, Suzuki etc.
CN200 is powerful and the data read and write speed is faster! The operation is stable and safe, which IS also with excellent performance.
Carprog Full Perfect Online Version Firmware V8.21 with All 21 Adapters, contain much more authorization than other CARPROG. Latest Software Version: V10.93.
Read the chip data, read and write ecu data, read transmission data etc at a high speed.
Software version : 1.94
MultiFlasher is a chip-tuning software intended for reading/writing ECU's FLASH and EEPROM memory. It can use any adapter with J2534 standard, e.g. OpenPort 2.0 by Tactrix.
V54 FGTech Galletto 4 Master FW 0475 Auto ECU Chip Tuning Programmer,Latest Version, EURO Version.
A nice chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item cannot only work as FG Tech Galletto 4-Master, but can also work for BDM.
Well-designed cheap professional programmer, Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small code -runs faster.
Xprog V5.84 adds new authorizations: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
CARPROG Full V10.93 (with all Software's activated and all 21 items Adapters), was designed with regard to demands of our customers to have universal tool for car radios,odometers immobilizers repair including advanced functions like EEPROM and microcontroller programmer, key transponder programmer.
NO LIMITS of the car model and year + NO NEED disassemble ECUs Read and write Bosch ECUs (Infineon's chips) incl. flash and eeprom
LESS RISK to clone/copy ECUs Able to modify data or do chip tuning to achieve superior performance
MUCH CHEAPER, compared with the same functional tools The price is 1/10 of other programming tools in the market
Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.
