For VAG gearbox TCUS: V30 DQ200 DL501 VL300 VL381 DQ500 DQ250 DQ380 DQ381 DQ400E.
For Jaguar Land Rover Pre-2017 and 2018-2025 KVM RFA 2-in-1 Communication Test Cable
OEM OBD2 Extension Cable for Launch X431 IDiag/Easydiag 3.0/X431 M-Diag/X431 V/V+/5C PRO Car Scanner Tools
This cable is used to connect X431 iDiag with your car's OBD2 port only for extension. The length of the cable is 23.6IN/36CM.
GODIAG BMW CAS4 CAS4+ plus FEM/BDC Test Platforms.
Used with AUTEL IM508 IM608 VVDI2 CGDI BMW, Lonsdor K518ISE etc
Godiag FEM / BDC programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and FEM / BDC programming engineers.
Supports working with tools from Lonsdor, AUTEL, LAUNCH, XHORSE ,CGDI, Foxwell, YANHUA MINI ACDP.
Xhorse VVDI Adapters & Cables Solder-free, used together with Xhorse MINI PROG and KEY TOOL PLUS.
Godiag CAS4 / CAS4+ test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 CAS4+ programming engineers.
Xhorse VVDI Adapter Kit for Mercedes Benz EIS/EZS Full 10 pcs for VVDI Prog, Multi Prog, VVDI MB, Key Tool Plus, Mini Prog.
This amazing 10 piece kit makes removing MCUs or soldering wires onto the PCB a thing of the past.
Required to access 80 % of Chrysler / Fiat 2018 vehicles
Required to access 100 % of Chrysler / Fiat 2019 vehicles
Access Chrysler / Fiat vehicles using Secure Gateway module, Allow to read and delete codes, Perform active tests
The Chrysler 12+8 Adapter is Autel's bypass for Chrysler's Security Gateway Module (SGM) which limits an aftermarket scan tool to only reading DTCs and viewing data.
Used with R270 CGDI CG100 XHORSE VVDI Prog Programmer.
Applied to repair the AUDI sixth Gen A6 Q7 Audi C6 steering column lock J518 ELV module failure replacement emulator.
BMW F Series Ethernet Cable for Autel Maxisys Elite MS908 PRO MS908S PRO MS919 MS909 MaxiSys Ultra, used for BMW F series chassis programming.
VVDI Prog Bosch Adapter Read BMW ECU N20 N55 B38 ISN Without Opening, works with Xhorse VVDI Prog.
Provide the best shipping method, EU Warehouse in Stock.
Connect with key tool plus solder-free adapters, like XDNP11 BMW CAS3, XDNP12 BMW CAS4, DELPHI, J518 Adapter
Godiag GT112 K-line test platform with Pogo PIN for VAG IMMO2/IMMO3
Godiag GT111 CAN-BUS test platform for VAG IMMO3/IMMO3.5
Godiag GT110 CAN BUS UDS test platform with Pogo PIN for VAG IMMO4
Yanhua Mini ACDP programming Bluetooth Adapter is used to connect ACDP with PC.
Exclusive release of TOYOTA 30PIN connector (no need to pierce the harness), supports 4A and 8A-BA types. 30pin cable direct read of the Smart ECU bypassing the pin emulating the key from dump and letting you add your Smart.
Can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, Lonsdor, SUPER VAG, AUTEL, etc.
All 2018 Fiat,Chrysler, Alfa vehicles are equipped with SGW security gateway modules to prevent access to the vehicle from the OBD2 port via a non-original diagnostic scanner. The purpose of this module is to prevent attacks on the vehicle network via the CAN BUS.
Compatible with X300 DP/ X300 DP Plus/ X300 PRO4/ Odo Master/ X200 PRO2 and other programmers (Launch X431 etc)
It is a dedicated connection line for single ECU module or multiple ECU modules, can work together with the professional diagnostic / programming device to perform ECU diagnosis, ECU programming, power adjustment and ECU module maintenance etc.