LAUNCH X-431 ADAS Radar 3-in-1 Calibration Set Overseas Online Add-On (HW+SW) Work with X431 PAD VII Elite/ PAD V/ Pro5 / PRO3 V+ 5.0/ PRO3S+

Product Description

LAUNCH X-431 ADAS Radar 3-in-1 ACC+Doppler+Corner Reflector Calibration Set Add-On (HW+SW)

Introduction:

The Launch Tech Radar 3-in-1 Calibration Set is a specialized tool designed for precise radar-based ADAS calibrations in modern vehicles. This set facilitates accurate calibrations for systems such as Adaptive Cruise Control (ACC), Blind Spot Monitoring (BSM), Lane Change Assist (LCA), and Front Corner Radar (FCR) across a wide range of European, Asian, and North American vehicles.

The X-431 ADAS RADAR 3-in-1 tool is a passenger vehicle ADAS calibration device designed for radar system calibration. It supports calibration of adaptive cruise control systems, blind spot monitoring systems, and front corner radar systems.

Warm Notice:
Production lead time: Approximately 10 days from order placement until factory finishes goods and prepares them for shipment.

Features:

• Multi-functional, supports calibration of multiple radar systems
• Calibration software provides detailed illustrated tutorials
• Outputs before-and-after calibration comparison reports
• Designed to share the same main unit frame, eliminating the need for separate ADAS calibration equipment.
• Supports calibrations for multiple radar systems, including ACC and BSD systems.
• Designed for passenger cars radar calibrations.
• Guided by the ADAS RADAR 3IN1 software on an X-431 scan tool step-by-step with detailed visual instructions.
• The Radar 3 in 1 is a cost effective ADAS solution for technicians and workshops focusing on Radar Systems, providing essential calibration capabilities without unnecessary complexity.
• Comprehensive Calibration Capabilities: Supports calibration for multiple radar-based ADAS, including ACC, BSM, LCA, and FCR systems
• Broad Vehicle Compatibility: Compatible with a wide range of vehicle makes and models across various manufacturers
• Enhanced Precision: Equipped with advanced laser measurement tools to ensure accurate and reliable calibrations
• User-Friendly Design: Modular components allow for easy setup and efficient workflow. Plug and play, no ADAS equipment required
• Compact and Portable: Designed for functionality in minimal spaces, facilitating ease of transport and setup

It's not a standalone device. Must work with following X431 diagnostic scanners.

Applicable Scan Tools: 

Local dealer's model:
X-431 PAD9 LINK, X-431 PAD7 LINK, X-431 PAD5 LINK, X-431 PRO3 LINK, X-431 PRO3 SE, X-431 PRO SE

Online dealer models:
X431 PRO cable connection scanner
Launch X431 Pro Elite (Same as X431 PROS Elite)
LAUNCH X431 Pro Star

X431 Pro 8-inch Series Bluetooth scanner
LAUNCH X431 PRO TT/ PRO Dyno
LAUNCH X431 PROS V5.0
Launch X431 V V5.0

X431 Pro 10-inch Series Bluetooth scanner
Launch X431 V+ V5.0
Launch Pro3S+ V5.0
Launch X431 PRO3 APEX
Launch X431 Pro3 ACE
LAUNCH X431 PRO3 V+ 5.0 Elite (Same as PRO3S+ Elite)
Launch X431 Pro5 Smartlink

X431 PAD Series
Launch X431 PAD V Elite
Launch X431 PAD VII Elite

LAM05-02 with ACC Radar Target(ACC system calibration)

Mercedes-Benz, BMW, Audi, VW, Porsche, SKODA, Seat, Romeo, MINI, Bentley, Rolls-Royce, Maserati, FIAT, Jeep, Nissan, Mitsubishi, Suzuki, Infiniti, Hyundai, Kia, BYD, GEELY, CHERY, etc. 

LAC05-03 with Corner Reflector(ACC/BSD system calibration)

Toyota, Lexus, Honda, Acura, Mazda, Subaru, Mitsubishi, etc.

LAC05-04 with Doppler Simulator(LCA/FCR system calibration)

VW, Audi, Škoda, Seat, Mazda, etc.

Under what circumstances is calibration required?

Repairing or replacing a sensor control unit (e.g., replacing an ACC radar)

The sensor deviation angle exceeds the normal range (incorrect installation position/angle)

Moving the position of a sensor on the vehicle body (sensor position changes)

Repairing or replacing parts that secure the front sensor (e.g., replacing the bumper)

 

Before performing the calibration steps using the calibration tool, please ensure the following conditions are met:

 

The vehicle’s sensor area must not be damaged.

The bracket holding the sensor must not be deformed.

Check the tire pressure and correct it to the recommended value if necessary.

Apply the parking brake and close the doors.

Ensure the vehicle’s coolant and oil levels are within the recommended range, and the fuel tank is full. The vehicle should not carry any items (passengers or cargo).

Connect the VCI to the vehicle and ensure that all systems except those related to ADAS are free of fault codes.

Follow the equipment step‑by‑step instructions and use the correct target and its distance parameters.

SUGGESTION:








We are here for you:

Email: Sales@OBDII365.com