MP001 is the latest automotive multi-function programmer developed by OBDSTAR. It fully supports EEPROM/MCU reading and writing/cloning/data processing for automobiles, commercial, new energy, motorcycles, marine (motorboats), etc., and is compatible with the P002 adapter (Toyota/Ford all-in-one adapter, Honda/Yamaha/Suzuki all-in-one adapter) and P003 adapter (some models of engine/gearbox clone K/CAN conversion, BOOT mode reading and writing) functions.
Software function
Read/Write EEPROM/MCU
Renew Key
SAS Reset
Body/Chassis/Other data processing
Read PinCode
Synchronize IMMO data
Dash Mileage Calibration
CAR/HD/Marine/Motorcycle Read/Write ECU DATA
Program BENZ FBS3 Keys
RH850/V850 Data Read/Write
and more functions are under development.
Features:
1. MP001 covers P003+ and has more SlMOS 18 than P003+( because the boot mode of SlMOS 18 is very special and needs more lO ports to be supported, P003+ has 4 lO ports and can't support it), and since MP001 has up to 12 lO ports, it can meet all future ECM requirements.
2. When read and write Chrysler GPEC2/2A etc, MP001 does not require a 120ohm resistor between CAN H and CAN L wires, P003/P003+ does need it.
3. MP001 can replace P003, P002 adapter as well.
4. MP001 can be used with P50 to read and write R7F701A033 data.
5. MP001 can be used to correct mileage for Honda C125 BIZ 2019 93C66 motorcycle (with MS80, MS50 or MK70)
6. To program Ford, Nissan, Renault etc RH850 key with X300 pro4 and RH850 kit, you also need MP001 programmer.
Note:
MP001 has P003+, P003, P002 functions.
Different tablet device models require different configuration software.
Package List:
1pc x OBDSTAR MP001 Programmer
1pc x OBDSTAR C4-01 Host
1pc x W004 Read/Write soldering wire
1pc x W005 Read/Write soldering wire
1pc x W006 Clock frequency wire
1pc x OBDSTAR ECU Bench Jumper
SUGGESTION: