With motorcycle IMMO kit, the OBDSTAR X300 DP Plus C , you can work on HARLEY-DAVIDSON, DUCATI, KAWASAKI, HONDA, YAMAHA, SUZUKI, APRILIA/ GILERA/ PEUGEOT/ PIAAGIO/ VESPA, BMW and BRP motorcycles and TOYOTA, FORD, NISSAN cars
OBDSTAR X300 DP Plus C Full Configuration with Motorcycle IMMO Kit Full Adapters Configuration
This package has full x300 dp plus functionality and extra Motorcycle key programming function. With this motorcycle IMMO kit full adapters, X300 DP Plus C can work on HARLEY-DAVIDSON, DUCATI, KAWASAKI, HONDA, YAMAHA, SUZUKI, APRILIA/ GILERA/ PEUGEOT/ PIAAGIO/ VESPA, BMW and BRP motorcycles and TOYOTA, FORD, NISSAN cars
OBDSTAR X300 DP Plus
Motorcycle IMMO Kit full adapter
OBDSTAR Motorcycle IMMO Kit Highlights:
1.OBD free PIN code key programming
2.Add additional keys,
3.Support all keys lost
4.OBD mode key programming
5.BENCH mode key programming
For more details, please click here
OBDSTAR X300 DP Plus C full version Highlights:
1.Support Immobilizer+Mileage correction/ Odometer Adjustment+Diagnosis+Special function (Oil reset +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag rest+TPMS+Steering angle reset+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning) Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+Ignition coil+Remote tester.
2.One year free update online, after that, 500USD for a one year update subscription
What do I need to pay attention to before buying X300 DP Plus?
1. Please register the device before using it. OBDSTAR Distributor code: 0086A002
2.X300 DP Plus supports English only
3. It doesn't support the following car models: DAIHATSU/ PROTON/ MAHINDRA/ MARUTI/ TATA/ HOLDEN/ LADA/ PERODUA/ IRAN. (Please contact local dealers from your area to get authorization)
4. Please check the supported car list of vehicle functions on the official website before you buy this device. If you are not sure whether the function or vehicle is supported, please feel free to inquire us online.
X300 DP Plus C Full Configuration Diagnostic Function:
X300 DP Plus C Full Configuration Software Advantages:
1. ECU Clone
- Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American, and Chinese. Diagnosis functions include: Read DTCS, Clear DTCS, Read data stream, Special functions, etc.
- Classify special functions: ABS, EEPROM Adapter, Battery match, CVT learning, EPB, Gear learning, Immobilizer, TPMS (low tire) reset, Cluster calibrate, ECU programming, steering angle reset.
- Specially designed for the Android platform with a clear and user-friendly interface.
ECU Clone, means ECU duplication.
The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.
2. Clone directly when replacing a new or a used ECU!
Without online matching in the 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!
3. Three features for ECU Clone:
A. Free of 4S online: break monopoly from 4S, benefiting automobile maintenance industry
B. Simplified operation procedures: realize foolproof operation
C. Non-dismantling with zero risks: read and write data without dismantling ECU
Switch activation function
Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from the vehicle CAN BUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate the secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!
1. Contain built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.
2. Car list: directly get it on the device
3. Upgrade Announcement: all details are available on the device
4. Customers can look up the features or uniquely support functions on the device
5. Help notes: built-in help notes for each model or function
8. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient
OBDSTAR X300 DP Plus C Full Configuration Hardware Advantages:
1. Built-in VCI box,communication more stable
2. 8-inch touchscreen, more intuitionistic
3. Can be charged directly via OBD interface
4. Practical and high-end gift box
5. Industrial design with silicone case
6. Back bracket design: Can propon the steering wheel or stand on the table, easier to operate
7. With simulated key 1 applies to the vehicle with 94/D4 type of smart key.
8. 3 in 1 P001 programmer: combined with EEPROM adapter + RFID adapter+ Key Renew adapter
9. Add the clip of reading SOP 8PIN EEPROM
10. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)
13.One Key Upgrade
How to use OBDSTAR X300 DP Plus Induction Coil?
1. Functional Overview:
Induction Coil is used to detect the key induction coil failure of the vehicle.
Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.
OBDSTAR X300 DP Plus A+B+C Full Configuration Technical Parameters
● Operation system: Android 5.1.1
● CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz
● Battery: 3700mA, rechargeable polymer lithium battery
● Extension memory card: 32G Micro SD (TF) card supported
● Memory capacity:1GB
● Storage capacity: 32GB
● LCD: 8.0 inch
● LCD resolution: 1280*800
● Touch screen: Capacitive touch screen
● Camera: 5 mega rear view camera
● Wi-Fi: supported
● Working temperature: -10℃ ~ 55℃（14℉ ~ 131℉ ）
● Storage temperature: -20℃ ~ 70℃（-4℉ ~ 158℉ ）
● Weight: about 1.0 Kg
● Dimension: 254mm*174*mm*35mm
How to register the X300 DP Plus?
To register it directly on device.
Please connect the device to a power supply and network, entering from the setting to register before using it.
X300 DP Plus C:
1*X300 DP PLUS Key Master DP Plus Unit
1* Main Wire
1* 12V2A DC Charger
1* OBD II-16 Connector
1* IMMO Induction Coil
1* Muti-functional Jumper
1* P001 Programmer Unit
1* C001/C002 Circuit Board
1* Renault Converter
1*Configuration List/Certificate/Quick Start Guide
Motorcycle IMMO kit full adapters:
1pc x M002 cable
1pc x M003A cable
1pc x M004 cable
1pc x M005 cable
1pc x M034 cable
1pc x M037 cable
1pc x M040 cable
1pc x M041 cable
1pc x M043 cable
1pc x M053 cable
1pc x M054 cable
1pc x P002 cable
1pc x TOYOTA AKL cables(TOYOTA-1 cable, TOYOTA-2 cable, 8A multi-functional cable)
1pc x FORD AKL cable
1pc x NISSAN/RENAULT 16+32 cable
Haima-17 is not included in the package because it is a connector suitable for Chinese cars.
We are here for you:Skype: OBDII365.comEmail: Sales@OBDII365.comWhatsapp :