EU SHIP NO TAX WIFI SUPER MB PRO M6+ Full Version DoIP Benz Diagnostic Scanner Supports BMW Aicoder, E-sys
EU Ship , No Tax. Click here
UK Ship , No Tax. Click here
We are here to provide you with a Better Price:
Email: Sales@OBDII365.com
Whatsapp:+86 18350207975
Product Description
- Supports BMW Aicoder, BMW E-sys and BMW App
- Full configuration= MB Star full function+ Benz F+G series coding+ Other DoIP
- Based on M6, Super MB PRO M6+ has greatly improved product functions and compatibility and is 100% compatible with the original Mercedes-Benz software.
Full configuration= MB Star full function+ BMW F+G series coding+ Other DoIP
What's Super MB Pro M6+?
Based on M6, Super MB PRO M6+ has greatly improved product functions and compatibility, and is 100% compatible with the original Mercedes-Benz software.
Features:
1.100% compatible with the original Mercedes-Benz software.
2.The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.
3.The communication interface between the M6+ and the computer is a USB3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)
4.M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services of vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve the product flexibility.
5.M6+ supports BMW E-SYS, Aicoder, wired and wireless programming and coding of F and G series, and supports BMW modification, hidden functions activation.
6.M6+ supports BMW APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool. ODIS-e.XDelete.THOR-the M Flasher.PRO- Tool and other mobile apps.
7. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.
8. Easy to set up. WiFi works great/stable. Battery does not drain as much as in older versions. There is a small cooler inside no overheat issue.
What's New in Super MB Pro M6+?
- Supports E-SYS, Aicoder for BMW F and G series coding
- Compatible with APP like, BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, ODIS-e, XDelete, M Flasher, etc
- Can be used as a DoIP device for VAG
| Item | Super MB Pro M6 | Super MB Pro M6+ |
| Xentry Car | Yes | Yes |
| Xentry Truck | Yes | Yes |
| DTS Monaco | Yes | Yes |
| Vediamo | Yes | Yes |
| MB DoIP | Yes | Yes |
| MB WiFi | Yes | Yes |
| PC USB | Yes | Yes |
| PC RJ45 | Yes | No |
| BMW Aicoder | No | Yes |
| BMW E-sys | No | Yes |
| BMW App | No | Yes |
| Other DoIP | No | Yes |
Super MB Pro M6+ Car List
Passenger Car Supported List:
A(176), A(169), A(168), B(246), B(245), CLC(117), C(204) C(203), C(202), 190(201),E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126), E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140) SLK(172),SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197), G(463), G(461), E(212), E(211), E(210), 124(124), S(222), S(221),S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107),SLS(197), M(166), M(164),M(163), G(460), GL(164), GLK(204), R(251)
Van Supported List:
MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638), V(638), Viano(639), T2, Vario, Vaneo(414)
Truck Supported List:
Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series
Unimog Supported List:
U20, UGN, UHN
Bus Supported List:
TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO, O350/O403, CONECTO, O404, O405-O408, Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/OH, OH, OH368, OF, OF384, LO, O400, FURTHER MODEL SERIES
Super Sports Car Supported List:
SLR(199)
Super MB Pro M6+ Connection Instructions
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light
① on the host is always on, and the system indicator
② is flashing during startup. After startup,
② is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port
⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network,
④ the indicator light will be on.
(3) Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, the password is 123456789.
(4) After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.
(5) For remote C-end operation, please consult us.
2, Connection between BWM software and hardware
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(4) The computer-side BWM software adopts wired or wireless connection, and the mobile phone BWM APP software adopts wireless connection.
(5) For remote C-end operation, please consult us.
3. For DOIP function and hardware connection of other diagnostic test software, please refer to BWM software and hardware connection method
Super MB Pro M6+ PCB Display:
Super mb pro m6 vs mb sd c3 vs mb star c4 plus vs OEM C6
| Name | Super MB Pro M6+ | MB Star C3 | SD C4 Plus DoIP | Benz OEM C6 |
| Features | Functions same as C6 | Main for old Mercedes till 2015 |
Work with original Xentry XDOS, DoIP Enabled |
Support WiFi and DoIP |
| Software Compatibility |
Factory HDD/SSD, Original software |
Factory HDD/SSD Only |
Factory HDD/SSD, Original software |
Factory HDD/SSD Only |
| Update | By HDD/SSD | By HDD/SSD | By HDD/SSD | By HDD/SSD |
| Wifi | Yes | No | Yes | Yes |
| Diagnosis | Yes | Yes | Yes | Yes |
| Programming | Yes | Yes | Yes | Yes |
| Xentry | Yes | Yes | Yes | Yes |
| DAS | Yes | Yes | Yes | Yes |
| EPC | Yes | Yes | Yes | Yes |
| WIS | Yes | Yes | Yes | Yes |
| SDmedia | Yes | Yes | Yes | Yes |
| Star Finder | Yes | Yes | Yes | Yes |
| PL73 | Yes | Yes | Yes | Yes |
| DTS Monaco | Yes | No | Yes | Yes |
| Vediamo | Yes | No | Yes | No |
| DoIP | Yes | No | Yes | Yes |
| New Mercedes | Yes | No | Yes | Yes |
| Old Mercedes | Yes | Yes | Yes | No |
| Heat dissipation | Heat sink+fan | No | Heat sink | No |
Package Includes:
1pc x SUPER MB PRO M6+ Host
1pc x OBD2 16pin Cable
1pc x USB Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
SUGGESTION:
We are here for you:
Skype: OBDII365.com
Email: Sales@OBDII365.com
Videos
How to connect Super MB Pro M6+ with USB (configure IP)
How to use Super MB Pro M6+ with BMW AiCoder
How to use Super MB Pro M6+ with BMW E-SYS
Super MB Pro M6+ diagnose Benz Actros 930 Truck
How to connect Super MB Pro M6+ with WiFi
Tech Support
How-to: configure Super MB Pro M6+ DoIP diagnostic tool for Benz Xentry and BMW ISTA/BMWAiCoder/E-sys etc.
1. Configure Super MB Pro M6+ for Mercedes Benz
1). Plug the M6+ with the power supply or connect the OBD to the test vehicle, and plug in the USB cable of the M6+.
2). Turn on the computer and plug in the computer USB cable.
3). Open the computer network configuration interface and find the Realtek USB FE Family Controller network
4). Click “Properties”–TCP/IPV4, and set the IP address as shown in the figure below.
5). Click “Advanced”, and add a group of network IP addresses as shown in the figure below.
6). Click “OK”. After the configuration is successful, the display is as follows.
7). For the same computer, if you replace a new M6+, you need to reset the IP address. After the setting is completed, the computer is successfully bound to the M6+ and there is no need to set the IP address again for wired and wireless Internet access.
8). You can test Mercedes-Benz with Xentry software normally.
2. Configure Super MB Pro M6+ for BMW
BMW wireless BMWAiCode configuration
Connect to the M6+ DOIP-***, password：123456789, wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. The computer-side BMWAiCoder configuration is as follows:
BMW wired BMWAiCode configuration
Connect the USB cable, press and hold the M6+ switch button for 3S, and the M6+ host wired indicator light will flash. The computer-side BMWAiCoder configuration is as follows:
BMW wired and wireless E-Sys configuration
Connect to the M6+ DOIP-*** wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. On the computer side, select the following for direct connection. Wired is similar, no setup required.
BMW wired ISTA configuration
Connect the USB cable, press and hold the M6+ switch button for 3S, and the M6+ host wired indicator light will flash. The computer ISTA configuration is as follows:
BMW Wireless ISTA configuration
Connect to the M6+ DOIP-*** wirelessly, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash. The computer side is selected as follows:
3. Set up Super MB Pro M6+ with mobile phone App
The mobile phone BMW APP adopts wireless connection.
Connect to the M6+ DOIP-***, password: 123456789, press and hold the M6+ switch button for 3 seconds, and the M6+ host wireless indicator will flash.
Now you can connect M6+ with OBD2 Apps.