The new Vgate iCar Pro Bluetooth provides almost any Bluetooth Low Energy (BLE) enabled device the hardware needed to read and delete faults from most cars made within the last 20 years. Fully compatible with all OBDII protocols and commands and features a unique auto-sleep / auto-wake function that reduces power consumption to almost nothing to protect your car battery life.
Features:
Vehicle Compatibility
Functions:
Low Energy Consumption (BLE)
After the engine is stopped for 30 minutes, Vgate iCar Pro Bluetooth 4.0 goes to sleep and won't drain your automobile's battery.
Its sophisticated triggers will wake up Vgate iCar Pro when you connect via Bluetooth, unlock doors, or crank the engine.
Compatible APPs
IOS:OBDFusion, OBD Auto Doctor, OBD Car Doctor, JScan, etc
ANDROID:Torque Pro, Torque Lite (Free), JScan, OBD Fusion, OBD Auto Doctor, Bimmercode etc
NOTE:
Connects to your Android or iOS device using a 3rd party application.
Depending on your needs, you can choose various apps cost range.
Connection Tips - For iOS & Android
NOTE for IOS User:
Just Enable Bluetooth on the IOS device, then configure Bluetooth device name in the OBD app setting.
DO NOT Need to pair Bluetooth Name on IOS device.
NOTE for Android User:
The two names IOS-VLINK and ANDROID-VLINK will be displayed), it can only be connected to the ANDROID-VLINK name.
Tips before your purchase:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link
Connector) under the dash and the Vehicle Emission Control Information
Label must state that the vehicle is OBD II compliant. To be sure your vehicle complies with OBD-II, look for a sticker on the vehicle
under the hood in the engine compartment that clearly states “OBD II compliant or certified”.
OBD-II protocols supported:
SAE J1850 PWM(41.6 Kbaud)
SAE J1850 VPW(10.4 Kbaud)
ISO9141-2(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
ISO15765-4 CAN(29bit ID,250 Kbaud)
SAE J1939 CAN(29bit ID,250* Kbaud)
USER1 CAN(11*bit ID,125* Kbaud)
USER2 CAN(11*bit ID,50* kbaud)
How to Connect vgate icar pro code reader?
For Android users:
Home screen
Go to setting page
Select V-LINK Default password is “1234”
Device paired
Run Torque app
Go to Torque app OBD II adapter setting
Choose connecion type>Bluetooth
Choose Bluetooth device>V-LINK
Exit Torque app completely
Run Torque app
Connected
For iOS users:
Home screen
Go to setting page
Click on Bluetooth function
(Device name is invisible)
Run Accurate app
Go to Accurate app setting page
Select Bluetooth and connect
Exit Accurate app and run again
Connected
How to Download Vgate iCar Pro Software ?
There is the software QR code in the use manual paper, just Scan it to download the software:
Bimmer Code for BMW-designated models :
Vgate iCar Pro Scanners Comparison
iCarpro BLE 4.0 vs vLinker BM+ vs vLinker FD+ vs vLinker MC+
Real 16Pin plug 1000+ Insert Lifespan