Program Ford Truck F150 F250 Smart Key via OBDSTAR F100
OBDSTAR F100 Ford/Mazda key programmer not only covers Ford cars, but also Ford trucks. Here is the instruction on programming smart keys for F150 and F250 by F-100.
Step 1: select 1 in 2 optional systems: immobilizer and smart key system
Step 2: select the model and function you want to do:
USA Ford F150, F250 models & functions in F100:
Immobiliser
F150 / F250 (2004-2008, 2011)
Type 1
All keys lost
Type 2
Erase keys
Program keys
F250 / F350 (2008-2010, 2010-)
Type 1
All keys lost
Type 2
Erase keys
Program keys
F150 Super Duty (2011-)
F250 Super Duty (2011-)
F350 Super Duty (2011-)
All keys lost
Smart key system
F150 (2011-)
Erase smart key
Program smart keys
F250 (2011-)
Erase smart key
Program smart keys
F150 / F250 (2015)
Erase smart key
Program smart keys
Step 3: go to Ford F150 or F250 key programming. Take “Program keys” here.
To program keys, at least 2 keys are required.
Insert the key to be programmed and turn ignition on…
(just follow the screen instruction)
Ford key programming success. Now, 3 current keys available.
Note: if 2 working keys in hand, try the free way before buying a Ford key programmer. It will help save a lot.
once you have had the new key cut by a Locksmith or other qualified persons use the following instructions:
- Insert an existing working key into the ignition cylinder.
2. Turn the ignition cylinder to ON(RUN) and back to OFF.
3. Remove the existing working key and, within five seconds, insert a second working
key and turn it to ON (RUN) then back OFF.
4. Remove second working key and insert the new key before ten seconds have
elapsed and turn it to ON (RUN). Leave it on for one second and turn back to OFF.
5. The security light will light up for three seconds to indicate that the new
key has been successfully programmed.