Smart 451 gearbox offline programming with MB SD Connect C4

This is the step by step instruction on Mercedes-Benz Smart 451 gearbox firmware offline scn coding update with MB Star diagnostic MB SD Connect C4 DAS diagnostic system.

You need:

MB Star diagnostic scanner (MB SD 4 is better)

A laptop running Win xp/ Win 7

Procedure:

Connect MB SD C4 multiplexer to Smart 451 and the laptop

Open DAS

Data is being determined…

Select Manual vehicle identification

Select Smart fortwo (C/A451)

Then Reset of the world

Smart fortwo 45-kW gasoline engine

Left-hand steering

Want the special or standard equipment to be determined from the control unit ‘N10/10 (SAM control unit)’ automatically? Select YES.

Data is being determined…

DAS is initializing communication layer…

Communication with the control unit ‘N10/10 (SAM control unit)’ is being eatablished.

Data is being determined…

Select systems

Select N15/6 (Sprintshift control module)

Data is being determined…

Control unit adaptions

Program control unit

Data is being determined…

Select offline (diagnostic unit not networked)

NOTE: For offline scn coding (diagnostic unit not networked), you must have Development Mode in DAS and activated “mbetried tool” for offline programming

Data is being determined…

Put the flash DVD on CD-ROM and click F2

Data is being determined…

VeDoc data for model 451 are not available. Click F2 to continue

Data is being determined…

No newer control module software was found

NOTE:

Done!