Autel APB130 VW MQB NEC35XX Adapter
Autel MaxiIM series released new VAG software update-reading immo data from VAG MQB48 series NEC35XX dashboard. The APB130 which together with the XP400 Pro will allow you to add the key and read immo data for VW MQB NEC35XX, as well as several supported vehicles.
Chip Types :
D703532 - D70F3525 - D70F3526 - D70F3537 - D70F3529
Note: You Need To Have Autel XP400PRO And APB130 Adapter To Use This Function
This function will need XP400 Pro+ APB130 adapter.
Features are introduced as follows:
Note: 1. Support add MQB48 type keys and all keys lost (AKL need to get 3rd party sync data)
The product prep schedule is as follows:
1. Price: To be decided, will be sent for review shortly;
2. The launch of the software version and mass production of the accessories plates is at the end of May;
3. This upgrade is free during your Autel product membership. In case you do not have a membership or one of our devices supported by this purpose, please renew your annual subscription or acquire one of the devices
Autel MaxiIM IM508 and IM608 series recently released VAG MQB NEC35XX locked immo data reading. The function requires XP400 Pro and APB130 adapter.
Read VAG MQB NEC35XX Locked IMMO Data with Autel XP400PRO APB130
Prepare IM508/IM508, XP400 PRO, APB130 adapter, remove and disassemble MQB cluster
Select VW-> Expert selection->NEC35XX locked (via dump)->chip type, i.e D70F3526-> Read chip data via programmer
IM608 will show you wiring diagram and instructions
Follow wiring diagram to solder mqb cluster (lift pin method here)
Connect apb130 adapter with xp400 pro, connect xp400 pro with im608 via USB cable
Read chip data (takes 5-10 minutes) and save
Then Calculate immo data
Upload immo data just saved
Decode immo data
Save new immo data
Now you will get CS, PIN, Mac etc. Then you can make dealer key and learn key with the immo data.