CGDI Prog BMW Car Key Programmer for BMW MSV80 CAS1 CAS2 CAS3 CAS3 FEM BDC

Product Description

CGDI Prog BMW MSV80 BMW Car Key Programmer 

Software includes BMW CAS1/CAS2/CAS3/CAS4/CAS4+/FEM/BDC IMMO+ BMW ISN Read+  BMW F Series Program+BMW F Series Coding+EGS ISN+CAS Mileage Reset+Porsche 987/911 key learning+95128/95256 Read and Write+BMW E Series Program+BMW E Series Coding+Maserati Meter Mileage Correction+E-series iDrive coding+ E, F, G series diagnostic + BMW CAS4 IMMO via OBD+MSD80/81/85/87/MSV90 Read ISN No Need Opening A0000017

CGDI Prog BMW MSV80 Highlights:

1. Auto diagnose & Programming
2. Security maintenance
3. A Key Programmer with OBD Functions
4. Short time programming, with safe operation safety and lifetime online technical support
5. CGDI BMW Supported Languages: German, French, Spanish, English, Chinese
6. Update Online ,with 1 year Warranty 
7. Certification: CCC,CE,GS, CCC,CE,GS,ISO

 
CGDI MSV80 BMW Car Key Programmer Supported Module list:
 
CGDI BMW Support Module list:

1. BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching, key all lost matching, CAS computer replace, CAS3+/P4X above version can directly downgrade by OBD in 5 minus
2. BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3. Support BMW key inspection,can check key what status in.
4. Support BMW engine computer DME replacement.
5. Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key) Exciusively support in Domestic
6. Support BMW Key unlock.
 

Model	Add New Key	All Key Lost	Read ISN code	Replace engine computer DME	BMW Key unkock	Working time
CAS1	support	support			support	1 minute
CAS2	support	support	support		support	1 minute
CAS3	support	support	support		support	1 minute
CAS3+	support	support	support		support	1 minute
CAS4	support	support	support			30 seconds
CAS+	support	support	support			30 seconds

Regarding BMW Key Matching Function:

1. Read Key Information: Read out the anti-theft information and key information of the vehicle, such as VIN, Anti-theft version, Remote control frequency, Key number, key ID, key type, and key position status.
2. Generate Dealer Key: After selecting the blank key bit, click this function to match the new key.
3. Synchronous ELV: When the steering wheel lock fails; when the key is matched, the car cannot start.
4. Synchronize DME: When the key is matched, the car cannot be started. Please execute this function to synchronize the DME and CAS system.
5. Restore Key Bit: When this key bit is used, it can be initialized.
6. Unlock Key: restore the key to a brand new state, which can be used again.
7. Disable Key: When the owner's key is lost, the relevant key bit can be shielded so that it no longer works on the vehicle.
8. Enable Key: enable the disabled key bit to make the key work on the vehicle again.
9. Mileage Reset: The device can read the mileage information of the anti-theft module, and execute this function to make the mileage become 0.
10. Exit shipping Mode: When the vehicle is diagnosed with this fault code, please execute this function to eliminate the fault code and return the vehicle to normal.
11. Recovery Code: After the car is matched with a new key, there is a failure of no coding file, this function can be used to restore the original coding file.
12. Replace FEM/BDC/CAS4: When the car module is faulty, use this function to help the vehicle replace the module.
13. Backup FAFP: Applicable to BMW FEM/BDC modules, backup original FAFP files.
14. Restore FAFP: Applicable to BMW FEM/BDC module, write the required FAFP file.
15. Reset Starter Lock: After replacing the BMW FEM/BDC module, the vehicle does not start, please execute this function.
16. Remote Key Repair: When the EEPROM chip on the BMW FEM/BDC module is damaged or the data is lost, causing the key to fail, you can use this function to repair the original car key. 

CGDI Prog BMW MSV80 Read MSV80 Specification:
 
Method 1: Read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate--time about 5 minus.
 
Methods 2: Directly split engine ECU (DME) to operate--connectline as follows:



MSV80/D80/D85/wiring in the experimental bench

How to Update CGDI BMW Software & Firmware?
 
CG BMW MSV80 Software Update Guide:

Step 1. Receive message " There is a new version", click on "OK"
Step 2. Click on "Setting", then "Check for updates", waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click "Yes" to update.
Step 5. Downloading file.
 
CGDI Prog BMW MSV80 Firmware Update Gudie:

Step 1. Connect CGDI Pro device to the EUC, open CGDI software.
Step 2. Click on "Setting" and then "Upgrade the firmware", waiting.
Step 3. Updating...
Step 4. CGDI programmer firmware update successfully, again click on "Upgrade the firmware".
Step 5. Get message reading " The version is already up to date without upgrading". Click on "OK".

CGDI BMW Update for MSD80/81/85/87/MSV90 Read ISN No Need Opening A0000017

No need shipping, please provide serial number of your CGDI BMW Key Programmer after payment.

This authorization includes:

A0000017   MSD80/81/85/87/MSV90 read ISN


 
Packing List 

1pc x CGDI Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line
1pc x Reading 8 Foot Chip Free Clip Adapter
1pc X CGDI ECU Reading Cable for BMW MSV80
SUGGESTION:


 


We are here for you:

Skype: OBDII365.com
Email: Sales@OBDII365.com