Product Description
- Save you money on your fuel budget and maintenance on your vehicle.
- E85 Conversion kits allow gasoline-only vehicles to run on Ethanol as an alternative fuel.
- A plug-and-play device in the vehicles fuel Injection system, by means of rerouting the signal from the E. C. M. to the fuel injectors.
Flex Fuel E85 Conversion Kit Working with All Injection Engine EV1 Bosch
E85 is a control module for new energy vehicle, like engine ECU. If your car has E85 control module, it can make the new energy systems work. With E85 module installed in the car, you can make the car using biofuels, then can reduce the fuel consumption, and also to reduce exhaust emissions. Our E85 fuel conversion kit could save you money on your fuel budget and maintenance on your vehicle.
When you use a conversion kit on your car you will see an immediate increase in horse power. You will also notice considerably smoother engine idle.
Compatible Vehicle:
All Injector with Engine EV1 Bosch
E85 Fuel conversion kit install Instruction:
Troubleshooting
In some cases, a check engine light will illuminate on your cars dashboard. This indicator does not pose any potential harm to your vehicle and there is no problem with continuing to drive while this light is on.
To correct this problem, the E85 kit system has a potentiometer located on the inside of the box for rich/lean adjustments. Simply unscrew the 4 screws on the top of the box to access the potentiometer (the white & blue dial located on the bottom of the circuit board, directly below the code starting with “E85”). You will notice that the range is from 0 - 10. 0 being the most lean setting; 10 being the most rich. All units are shipped in the position of number 5. Check Engine Light (during 1st 60 miles): If your check engine light appears during the first 60 miles on gas only, the setting is too rich for your car. Adjust the potentiometer to a lower setting between 3 - 4, and repeat Step 7 (including driving on gas only for 60 miles), before fueling with E85.Check Engine Light (on E85): If your check engine light appears while running on E85, the setting is too lean. Adjust the potentiometer to a higher setting between 6 - 7. Finding the optimum setting for the potentiometer, is a one time adjustment and will not require continual adjustments for running on gas or ethanol.
Package Including:
5pcs x E85 main unit with 7 connector
View More Details
SUGGESTION: We are here for you:Skype: OBDII365.comEmail: Sales@OBDII365.comWhatsapp : +86 18350207975