Yanhua Mini ACDP Read BMW DME ISN Code (when all keys lost) No need Soldering.
YANHUA Mini ACDP BMW DME ISN Read Module 3 Without Soldering
Highlights
Read & Write BMW DME ISN Code by OBD when all key lost, no need soldering
Read/write N20/N55/N13 ISN code via OBD
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.
Supports BMW key programming for CAS, FEM & BDC systems
Package List:
1pc x BMW-N13 port board
1pc x N20 caliper for opening the hole of shell
1pc x N13 firmware
Module 3 must be used with Yanhua Mini ACDP1 basic module (sold separately), cannot be used with ACDP2 unit.
What's new on MODULE 3? N13/N20/N63/S63/N55/B38 ISN read/write and ecu clone via bench mode B48/B58 ISN Reading and Clone via Bench Mode B37/B47/N47/N57 Diesel Engine Computer ISN Read/Write and Clone N12/N14/N45/N46 DME ISN Read/Write and Clone N47/N57 Diesel DME ISN Read/Write and Clone
NOTE: If on bench read and write ISN DME BMW Fxx chassis N20 (MEVD1724) and more from Exx, Fxx, Gxx, Ixx, Rxx, ACDP basic module + Module 3 + adapter boards are recommended.
SUGGESTION:
Yanhua Mini ACDP read BMW MSV80 DME ISN code no soldering
Yanhua ACDP read BMW ISN code by OBD
Tech Support
How to switch on the OBP+ICP adapter when reading ISN code from BMW DME?
Question:How to use the switch on the OBP+ICP adapter?
Answer:
1:All operations except the DME read and write the ISN code option operate by pushing the switch to gear “NC”.
2: When you do the DME read and write the ISN code option, when prompted as shown in the figure below, push the switch to the gear "CAN_R_Join"
ACDP introduces 2 Ways to Read/Write N20/N55/N13 ISN without Opening DME shell
Method 1:
Read and Write directly through OBD. Shown as picture below:
Method 2:
Read and write ISN on the desktop platform.
No need to open the DME shell.
(Contact obdii365.com customer service if you need the desktop platform)
N20/N13 wiring connection
Shorten the jumper to the “CAN-R-Join” port according to the marked position