New Year Sale US EU SHIP NO TAX CGDI CG100X V1.7.1.0 Smart Programmer for Airbag Reset Mileage Adjustment and Chip Reading with Free D1 Adapter Supports MQB 5A 5C 5D Clusters

Product Description

CG100X Functions List:

1. Meter mileage adjustment
The software is embedded with intelligent algorithms, and the mileage data is automatically analyzed. It supports more than 4,600 car models, with a success rate of over 95%. It is closely following the market and is being upgraded in real time. Newly added VW MQB mileage repair: Golf, Magotan, Lavida, T-Roc, Tayron, Bora, Sagitar, Lamando, CC, Variant, Teramont, Skoda, Octavia, Kodiak and other models. (Self-contained algorithm.)



2. Airbag computer reset
Contains more than 4,500 ACU models, dedicated to solving airbag faults, analyzing the cause of the light, perfectly clearing the fault code, giving car owners peace of mind, and more models are continuously added.


3. Body control module repair
Focus on automotive electronic faults, good at repairing various common faults, support engine computer, steering angle, footwell module, keyless entry module, audio amplifier, gearbox computer, 48V light hybrid lithium battery, 12V lithium battery, etc. A body computer that provides vehicle data and assists repairmen in resolving vehicle failures.


4. Accessory clone replacement
Solve the pain points of the repair shop, a single device can replace accessories, data cloning, analysis and repair, one-click operation without asking for help.


5. Various chip data reading and writing
Covers more than 90% of automotive chips, supports more than 1,800 models, reads, modifies, writes, erases, partitions and saves to meet daily car repair needs, and can also use the browser that comes with the software to analyze data.


Octal Chip (EEPROM):
24 series, 25 series, 35 series, 93 series, 95 series, X50 series, S29 series, RH series, CAT10 series, CR series

Fujitsu
MB90 series, MB91 series, MB96 series

Microchip
PIC18F series

Texas Instruments (TI)
TMS series
NXP (NXP)
S32K1 series
Motorola/Freescale
9S08 series, 9S12 series, HC908 series, HC912 series, MAC series, MPC56 series
Atmel
ATMEGA series
Renesas
H8SX series, M32R series, R5F10D series, RH850 series, V850 series
Infineon
TC series, XC series
Saiyi Law (ST)
SPC series, ST10F series, STM32F series, STM8 series
Cypress/Spansion Semiconductor (Cypress/Spansion)
S6J series

6. Car key matching
Support BMW CAS1-CAS44 series and Land Rover models, automatically display the key ID and usage status, and assist the locksmith to complete the key matching work.


CG100X Features:

1. Top ten accessories, functional classification
In addition to the main unit, it comes with 10 kinds of accessories, and the functions do not overlap; the DB25 connection method is used, which is more stable and safe; the wire number is clearly marked to avoid welding errors.

2. Reading and writing speed up, status monitoring
Compared with conventional programmers on the market, CG100X has an overall speedup of more than 120% for chip reading and writing, and some chips can reach 200%. The operation is monitored in real time to protect data and chips. For large-capacity eight-pin chips, the speed of reading and writing is increased by more than 500%, shortening the operation time, so that customers no longer have to wait, and truly achieve twice the result with half the effort.

3. Eight pins without dismantling, pin detection
Supports eight-pin chips without dismantling, avoiding the risk of back and forth soldering. Strong drive capability, free from communication interference. Provide pin detection, red means poor contact, green means good contact, visually display the pin status. It is more compatible with Honda instruments without dismantling, and provides wiring diagrams to avoid motor damage caused by disassembling the pointer. More disassembly-free
wiring diagrams are continuously added.

4. Intelligent algorithm, real-time upgrade
Automatic analysis of instrument kilometers, the error does not exceed 32Km, some hybrid models support modification of HEV+EV, engineering vehicles can modify working hours, and more than 50% of trucks provide fuel consumption modification.

Airbag Computer Reset Provides Two Solutions: Fault Clearing and Data Overwriting.
Fault clearing:
The original data is stored in the chip, and the fault code is clear, such as collision fault or air curtain fault. If you choose this repair method, only the relevant fault data in the chip will be cleared, and other data areas will not be
affected.

Data Coverage: When we are not sure how many jobs we have received and the data is not the most original, we can choose this repair method. After replacing all the data in the chip, a fault code may be reported due to the different configuration of the vehicle, and we need to reprogram and match. Focus on the development of R7F7 instrument, D70F instrument, SPC instrument and new airbag computer, so that 100% of the eight-pin chip can be disassembled, and is committed to covering 99% of the models and modules in the market.

5. Hardware upgrade, data loss prevention
Although CG100X and CG100 are different in one word, the equipment is completely different. CG100X adopts the industry's ideal architecture design and is equipped with the world's most advanced MCU. It is known as a fighter among single-chip computers, and its operation is more stable and safer. The advantages in hardware come from market demand. We attach great importance to customer feedback and suggestions. CG100X will support new modules and new chips more easily.

Adopting DB25 communication interface, compact design, stronger driving ability, OBD mode can be upgraded later, and supports CAN, LIN, K and other automotive communication protocols.

6. Easy access, automatic search
● Open the software without plugging in the device, which is convenient for viewing the vehicle model and functions;
● The car model search automatically matches special characters such as spaces and bars, regardless of case;
● The general programmer search mask directly displays the chip;
● In the list interface, click to enter and press Enter to enter;
● Support picture scaling, display file open/save path.

CG100-X Programmer PCB:



CG100X Latest Update Information:

CG100X V1.7.1.0 NEW (2025.01.20):
CG100X Software Free Download

V1.7.1.0
1. Added 27 models to dashboard.
2. Added 5 models to airbag.
3. Added 5 models to read-write.

The following models are added for dashboard.
BAIC RUIsheng wangpaiM7 2023- 24C16(Blue board)
BAIC Kari Road F7 2023- 24C16
Benz A-class(W247) 2019- R7F701403(encrypted)
Benz B-class(W247) 2019- R7F701403(encrypted)
Benz CLA(W247) 2019- R7F701403(encrypted)
Benz GLA(W247) 2019- R7F701403(encrypted)
Benz GLB(W247) 2019- R7F701403(encrypted)
Benz GLE(W167) 2019- R7F701403(encrypted)
Benz E-class(W213) 2020- R7F701403(encrypted)
Benz CLS(W213) 2020- R7F701403(encrypted)

V1.7.0.0
1. Added 43 models to dashboard.
2. Added 2 models to airbag.
3. Added 11 models to read-write.
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701421(Only 5D Meters)
Toyota BZ4/BX4 R7F701441
Toyota Platinum 4X R7F701441
Toyota frontlander R7F701441
Toyota COROLLA R7F701441
Toyota Levin R7F701441

V1.6.4.0
(2024.11.26)
1. Added 20 models to dashboard.
2. Added 16 models to airbag.
3. Added 4 models to read-write.
Adds 
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701404 (Only 5D Meters)
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701401 (Only 5D Meters)


V1.6.0.0 
(2024.10.16)
1. Volkswagen MQB adds 2 new R7F7014xx mileage repair models.
2. Added 28 models to dashboard.
3. Added 1 models to read-write.

Volkswagen MQB-R7F7014xx supports the following models.
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701404 (Only 5C Meters)
Volkswagen MQB R7F7014xx-Removal of capacitor way R7F701406 (Only 5C Meters)


CG100X VAG MQB Mileage Correction Dashboard and Chip List