Global VersionEU UK SHIP NO TAX Launch X431 Key Programmer with 4 Universal Remote and 1 Super Chip for X431 IMMO Elite IMMO Plus PAD V PAD VII Pro3 APEX Pro Elite CRP919E BT
Launch X431 Key Programmer Remote Maker with Super Chip and 4 Remotes
Launch X431 Remote Maker is able to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.
Highlights:
Read Transponder
Generate Transponder
Detect Frequency
Detect Ignition switch coil signal Generate Remote (Launch X431 remote)
Set type of super chip
Set type of wireless remote Unlock Toyota smart key
Compatible with Launch super chip and vvdi super chip
etc
NOTE: It works on the X-431 Pro5 Smartlink, but you need to buy an OTG USB Micro to USB-C adapter. If new Pro5 Smartlink 2.0, does not need OTG converter.
Introduction to the functions of super chips: Support the conversion of most car model chip types, and support separate matching to achieve vehicle startup. Support chips of the 8A, 8C, 8E, 4C, 4D, 4E, 48, 7935, 7936, 7938, 7939, 11/12/13 types.
How to Use Launch Super Chip:
1. Enter the menu [Set type of super chip] to generate.
2. Select the corresponding key chip type and insert the super chip into the anti-theft induction coil.
3. Once successfully generated, it can be used.
The Launch key programmer comes with 4 universal remotes:
LS Nissan (smart card, 4 buttons) -01,
LN Peugeot DS (folding 3 buttons) -01,
LE Volkswagen super remote (folding 3 buttons) -01,
LE Ford super remote (folding 4 buttons) -01
Key programmer: Identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.
USB to TYPEC connector: device to key programmer
One click start smart key models and use LS series Nissan super remotes to generate corresponding keys. For car models with electronic chip keys or the 11/12/13/7936/7937/7947/7946 chips, use the LN series DS super remote. For models without electronic chip keys or models 46, 48, 4D/70, 83, 8A/H, G, 4E, 11/12/13/C, 42, 33, 47, 8C, and 8C, use the LE series Volkswagen and Ford super remotes.
How to Generate LE VAG and Ford Super Remotes:
1. Enter the [Vehicle Remote] menu and select the corresponding available super remote to generate.
2. Select the corresponding key and place the super remote key in the key programmer to generate.
3. After the remote control is successfully generated, enter the [Set type of super chip] menu to generate the corresponding key chip.
How to Generate LS Nissan super remote:
1. Enter the [Vehicle Remote] menu and select the corresponding smart key model to generate.
2. Place the smart remote key in the key programmer to generate.
How to Generate LN Peugeot DS super remote:
1. Enter the [Vehicle Remote] menu and select the corresponding electronic key model to generate.
2. Place the electronic remote key in the key programmer to generate.
3. For car models without electronic keys, enter [Set type of wireless remote] to generate the corresponding key.
Specifications of Launch X431 Key Programmer:
Product size: 80*40*11.2mm
Working voltage: 5V
Operating temperature: 0-50°C
Communication interface: USB
Low-frequency communication interface: 125K low-frequency transceiver
High-frequency communication interface: support 13.56M high-frequency transceiver, support 3000M-500M high-frequency signal frequency measurement
Introduction of 4 smart keys:
Product Name
Picture
Usage Scenario
Function
LS4-NISN-01
LS intelligent key is only compatible with vehicle models equipped with the Kessy system, its functions include keyless starting and door edge sensing.
1.Wireless programming
2. Equipped with anti-theft chip
3. Uses the button cell 2032
4. Circuit board with a 2-year warranty
5. Repeatable writing
6. Batteries need to be installed while generating
7. Supports vehicles with 46, 47, MQB48, MQB49, 4A chips
LN3-PUGOT-01
Certain chips in LN remote can't generate all vehicle models, it's needed to check whether the type of chip can support the vehicle model, the chip is integrated into the remote.
1.Wireless programming
2.Equipped with anti-theft chip
3.Uses the button cell 2032
4.Circuit board with a 2-year warranty
5.Repeatable writing
6.Batteries need to be installed while generating
7.Supports vehicles with 11, 12, 13, 7936, 7937, 7947, 7946 chips
LK3-VOLWG-01
XK remote is applied in the situations where the remote needs to be matched but the chip is not needed, or it can also be used with super chip.
1.Wiring programming
2.Not equipped with an anti-theft chip, needs to be used with an anti-theft chip
3.Uses a button cell 2032
4.Circuit board with a 2-year warranty
5.Repeatable writing
6.Batteries cannot be installed while generating
LE4-FRD-01
LE remote contains chip and remote, the multimode chip can generate most of the vehicle models and cover the majority of them.
1.Wireless programming
2.Equipped with a multimode chip
3.Uses a button cell 2032
4.Circuit board with a 2-year warranty
5.Repeatable writing
6.Batteries need to be installed while generating
NOTE: If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII, you must connect this key programmer with tablet, otherwise it will give error device no response.
How to Generate Cadillac SLS smart remote by Launch X431 Key Programmer
Tech Support
Launch X431 Key programmer is now can be added to your LAUNCH X431 IMMO Elite, X431 IMMO Plus, X431 PAD VII and PAD V. Purchase the new set and update your X431 to get car key programming & remote function.
Launch X431 will automatically pop up an upgrade prompt: “Do you want to install an update to this existing application? You existing data will not be lost”
Update software and install latest App
Install and open App.
If your App is up-to-date, jump to Step 2.
Software Update >> Update >> All start
Software has been successfully installed.
2).
Go to Other Modules >> Toolbox >> Key Programmer >> Update
Firmware update >> Update
Remote database update >> Update
NOTE:
If need to use X-prog3 related IMMO key programming and ECU/TCU Cloning functions, go to IMMO Programmer function menu.
If need to use Key Programmer remote relelated functions, go to Key Programmer functions menu. Here we enter Key Programmer menu.