LAUNCH X431 O2-2 Scopebox Oscilloscope (4 Channels) Analizador Digital Scopebox Tester USB Port Works with X431 PAD VII, PAD V, PAD III, Pro3 APEX

Product Description

LAUNCH X431 O2-2 Scopebox Oscilloscope (4 Channels)

Featuring a new design and upgraded hardware, the LAUNCH O2-2 Scopebox is a versatile and easy to use add-on module that can detects high level faults on various electrical components, such as sensors, acturators and circuits. By integrating with the X-431 series scan tools via O2-2 application, it delivers accurate and conclusive diagnostic faults that enable the shop and technician to enlarge their scan tool's functionality.

Compatible with Launch X431 PAD VII, PAD V, PAD III, X431 Pro Elite, X431 Throttle, Pro3 APEX, V 5.0, Pros V5.0, V+, Pro3s+, Pro5, Pro TT, Pro3 ACE, Pro Dyno, Pro3 APEX, X431 Pad II AE, X431 Torque, X431 Turbo, X431 IMMO Elite, X431 IMMO Plus etc

Features of Launch O2-S2 Scopebox:

- Features the ability to record and playback high-resolution waveform data for future analysis.
- Choose of the waveform display speed for fast analysis
- Library of predetermined waveform signals, built-in memory
- Registration and storage of the tested signals for later analysis and troubleshooting
- Auto adjusting of all chart signals on all 4’s channels
- Separate grounding of each channel to minimize distortion of test signals
- High quality BNC connectors
- Complete set of adapters for ignition systems, sensors, connectors and other accessories
-Multiple automotive tests include circuits, sensors, actuators, ignition tests and more.
-Access to 23 variants of automatic measurements that are displayed on one screen for an easy switch.
-Use the zoom in/out feature to review precise details.
-Customizable personal system settings that can be saved as configuration files for viewing.
-Magnifies waveform math operations, such as addition, subtraction, multiplication and FFT function for high level waveform analysis.

Specification

Channels	4
Bandwidth	100MHz
Rising Time	3.5ns (typical)
Accuracy	±3%
Input Impedance	1M ±1.5%
Input Type	Single-ended, BNC Connector
Input Coupling	DC, AC
Overload Protection	±200V on single input
Timebase Ranges	1ns~1ks (1 Channel) 1ns~1ks (2 Channels) 1ns~1ks (4 Channels)
Vertical Resolution	8bits
Buffer Memory	10M (for 4 Channels)
Power Interface	USB port, DC IN port
Data Exchange Via	USB
Trigger Mode	Normal, Auto and Single SEQ
Advanced Triggers	Edge, Pulse width

Launch O2-2 Scope Box vs Launch O2-1 Scope Box
 

Model	O2-1	O2-2
Channel	4	4
Bandwith	100MHz	100MHz
Rise Time	≤3.5ns(typical)	≤3.5ns
Maximum sampling rate	1Gbps(for four channels)	1Gbps
Input resistance	1MΩ±1.5%	1MΩ±1.5%
Storage depth	50M	10M
Number of sampling bits	8bit	8bit
vertical accuracy	3%	3%
Vertical gear	5mV~10V	5mV~10V
Inverting	Support	Support
Channel coupled	DC, AC	DC, AC
Time base gear	5ns~1ks	1ns-1ks
Time base accuracy	20ppm	20ppm
Sampling mode	Normal	Normal
CANBus decoding	CAN, LIN	CAN, LIN
Trigger type	Edge, Pulse width	Edge, Pulse width
Trigger mode	Normal, Auto and Single SEQ	Normal, Auto and Single SEQ
Trigger coupling	DC, Noise rejection	DC, Noise rejection
Math	Double waveFFT	Double waveFFT
Display	YT、Zoom、Roll	YT、Zoom、Roll
Roll mode	200ms/div~1000s/div	200ms/div~1000s/div
Auto configuration	Support	Support
Auto measurement	23	23
Cursor	Horizontal cursor, Vertical cursor	Horizontal cursor, Vertical cursor
Powered by	USB port, DC IN port	USB port, DC IN port
Data transmission method	USB	USB
Vehicle configuration options	Circuits, sensor, actuators, ignition	Circuits, sensor, actuators, ignition
Operating temperature	0℃~50℃	0℃~50℃
Power supply range	USB:5V/1A DC:12V/24V	USB:5V/1A DC:12V/24V
Compatibility	Different tablet resolutions require different APPs	One APP can be compatible with multiple tablet resolutions
Multi-touch gestures	No	Supports 2-point touch, the waveform can be zoomed in or out vertically or horizontally
Vehicle configuration	No	Each test project can support online help documentation (help documentation will be compiled according to needs later)
Firmware upgrade	Manual upgrade	Support online upgrade
Trigger	Waveform observation cannot be expanded during normal trigger waiting.	Can be used normally during normal trigger waiting.
Demo function	No	Yes
Split-screen	No	Yes
Sampling rate	Single channel 1G/s, more than 2 channels only 250M/s	Single channel 1G/s, 2 channels 500M/s, multiple channels 250M/s
Start time	2-3S	about 16s
Power consumption	about 6W	about 7.5W

How to Connect the Cables?
 
Different application scenarios require different connection methods (no matter which application scenario, the following connections are required):
 
First, power the oscilloscope box through the double-clip power cable: Connect one end of the double-clip power cable to the power interface of the oscilloscope box, and the other end to the vehicle battery to draw power (red is connected to the positive pole, black is connected to the negative pole).

Note: * PADVII series tablets support USB power supply.

2. Connect the Type B terminal of the USB cable to the Type B interface of the oscilloscope, and connect the other end to the USB interface of the diagnostic device.

Package Includes:

1pc x Launch O2-2 main unit
4pcs x HT 30 test lines
1pc x HT25 secondary ignition pick-up line
1pc x battery clip cable
1pc x USB cable
2pcs x HT201 attenuator
20pcs x piercing needles
2 pairs x multimeter probes
2 pairs x crocodile clips
5pcs x colored 4 female probes
4pcs x clipper fuses(5*20mm)
2pcs x screw head
1pc x user manual
1pc x color label
1pc x packing list

SUGGESTION:

---

We are here for you:

Skype: OBDII365.com
Email: Sales@OBDII365.com
Whatsapp : +86 18259252285
Business Whatsapp: +44 7418605489