LAUNCH X431 PRO ELITE Highlights
25 Language Supports
English，French，Spanish，German，Russian，Korean，Japanese，Portuguese，Italian，Polish ，Dutch，Hungarian，Finnish，Czech，Turkish，Greek，Arabic，Danish，Romanian，Serbian，Swedish，Traditional Chinese，Thai，Persian，Simplified Chinese.
The difference between X431 PRO ELITE and X431 V 4.0
Launch X431 Pro Elite Functions:
Bi-directional Control （Active Test）
Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.
OE- Level Full System Diagnosis
This LAUNCH diagnostic scanner can establish a data link to all systems and subsystems of the vehicle being serviced to:
-Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.
-Read & erase DTCs to locate problem areas and clear the codes.
-View Live Data of each parameter item.
The following is a list of modern vehicle systems that this scan tool can get access to:
-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems
-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System
-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset
-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle
-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics ... and more.
This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.
32+ commonly used repair & maintenance services, keep creasing
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and tire pressure sensor is damaged,The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.
3.Oil Lamp Reset
Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.
4. Electronic Throttle Sensor Reset
To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
6. SAS Reset
It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.
To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.
Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.
Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.
It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.
This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is clean or replaced.
When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.
14.NOx Sensor Reset
If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
This function is used to set the size parameters of the modified or replaced tire.
This feature is designed to perform door window matching to recover ECU initial memory.
This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)
18. AC Initialization
AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.
19. AdBlue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.
20. AFS Headlamp Reset
This function enables you to initialize the adaptive headlamp system.
21. A/F Reset
This function is applied to set or learn air/fuel rate parameters.
22. Gearbox Reset
This function enables you to complete the gearbox self-learning to improve gear shifting quality
23. Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
24. Transport Reset
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal.
25. Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
26. High Voltage Battery Detection
This function is used for high voltage battery diagnosis and status information detection.
27. Sunroof Initialization
This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car ,etc.
28. Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.
29. Language Change
This function is used to change system language of vehicle center console.note:you need to have language pack to do language change
30. Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.
31. Intelligent Cruise Control System Reset
This function is used to matching the intelligent cruise control module after it is replaced or repaired.
(Note: Available maintenance functions vary depending on the vehicle make, year, and model.)
More Functions Supports
1. Support automatic VIN code identification
2. Share Report via Wi-Fi & print Report
3.12-in-1 Live Data in Graphic
4. Measure the current voltage of the vehicle’s battery.
5. Support automatic generation of diagnostic report and upload
6. Diagnostic Report & Online Feedback
LAUNCH X431 PRO ELITE is compatible with more module functions
LAUNCH X431 TSGUN: Perform all professional TPMS diagnostics and maintenance functions such as activating sensors, performing TPMS relearn, programming Launch Sensors, monitoring TPMS health status, etc.
LAUNCH BST360 Battery Tester: Connecting with this battery tester, X431 PRO ELITE is endowed with battery diagnostic features such as battery health test, start system test and charging health test, etc., which help you to detect battery-related issues of vehicles accurately and timely.
LAUNCH VSP600 Videoscope: Make X431 PRO ELITE a perfect tool for viewing and capturing video and still images of hard-to-reach areas.
LAUNCH X431 X-PROG3: Achieve diagnostic functions such as vehicle k ey, Engine, and gearbox programming for various vehicles.
X431 ADAS Moblie/ADAS PRO: Calibrate a wide range of camera-based & radar-based driver assistance systems.
LAUNCH X431 Wi-Fi Printer: X431 PRO ELITE can be connected to WIFI printers to print out diagnostic data or reports.
Cover 99% Global Car 100000+ Vehicles Supports
150+ Car Brands,100000+ Car Models Supported!
√CANFD Protocol Supported- Compatible with GM models (2020 and later).(No need to buy adapters.)
√DOIP Protocol Supported- Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).(No need to buy adapters.)
√FCA AUTOAUTH-For 2017 and later FCA Vehicles with Secure Gateway Module (SGW): You can Register with AutoAuth to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable.
America Car Models: For FORD, LINCOLN, GM, BUICK, CADILLAC, CHEVROLET, CHRYSLER, DODGE, JEEP, HM, For MERCURY, For PONTIAC, For SATURN, For TESLA;
Europe Car Models: For BENZ, SMART, SPRINTER, BMW, VW, SKODA, A-UDI, OPEL, LAMBORGHINI, PORSCHE, MAYBACH, EURO FORD, LANDROVER, DR, BENTLEY, ROVER, MINI, VAUXHALL, FERRARI, FIAT, LANCIA, ALFA, ROMEO, MASERATI, BUGATTI, For PEUGEOT CITROEN, RENAULT, SAAB, VOLVO, OPEL, DACIA, SEAT, ABARTH, For RENAULT, For ROLLS-ROYCE, For SAAB, For SKODA, For SMART, For VOLVO;
Asia Car Models: For Acura, For DAEWOO, For HOLDEN, For HONDA, For HYUNDAI, For INFINITI, For ISUZU, For KIA, For LEXUS, For MAZDA, For MITSUBISHI, For NISSAN, For SCION, For SSANGYONG, For SUBARU, For SUZUKI, For TOYOTA, For BYD, For CHERY;
Malaysia Car Models: For PERODUA(PERODUA), PROTON ;
IRAN Car Models: For IKCO, MVM, SAIPA;
Australian Car Models: For AUSFORD, For HOLDEN ;
India Car Models: For TATA, MARUTI, MAHINDRA, INDIA HM ;
Russia Car Models: For GAZ, For VAZ;
Brazil Car Models: For FIAT; For GM;
1pc x tablet
1pc x AC adapter
1pc x Main cable
1pc x USB cable
1pc x UK plug
1pc x US plug
1pc x EU plug
1pc x user manual
1pc x quick guide
1pc x packing list
1pc x password bar
Launch X431 Pro Elite bi-directional diagnostic scanner user manual: how to download apk, register device, update software and do a factory reset.
Download and install diagnostic software
1. Connect WIFI
Tap setting on the home page
Select Network & internet>> WiFi
Connect an available WiFi with good signal
2.Download and install diagnostic software
Press the home screen and slide up
Select APP Init
Input the 12-digit serial number which can be found on the backside of X431 PRO Elite OBD2 scanner
Then tap “OK”
Start to download and install the diagnostic APP
Installed successfully, and tap “Open the application”
Tap “Confirm” to allow X-431 PRO ELITE to access phone, camera, location, storage, microphone…
Tap the button to allow display over other apps
And tap the return button at the taskbar to go back to the main menu
Tap “Login” at the top right side
Input username and password, and tap “Login”
After logging successfully, tap “Software Update” on the main menu
It will show the vehicle diagnostic software list. Tap “Update” to update all software.
At this point, all steps are completed.
Reset X-431 Pro Elite Tablet:
Turn on X431 PRO Elite tablet
Tap Setting on the home page
Select System>> Advanced>> Erase all data (factory reset)>> Erase all data
Wait for the tablet to restart.